x86: irq: Remove chipset specific irq router drivers
At present there are 3 irq router drivers. One is the common one
and the other two are chipset specific for queensbay and quark.
However these are really the same drivers as the core logic is
the same. The two chipset specific drivers configure some registers
that are outside the irq router block which should really be part
of the chipset initialization.
Now we remove these specific drivers and make all x86 boards use
the common one.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
index 305cd3d..a1d6a84 100644
--- a/arch/x86/cpu/irq.c
+++ b/arch/x86/cpu/irq.c
@@ -237,7 +237,7 @@
}
}
-int irq_router_common_init(struct udevice *dev)
+int irq_router_probe(struct udevice *dev)
{
int ret;
@@ -256,11 +256,6 @@
return 0;
}
-int irq_router_probe(struct udevice *dev)
-{
- return irq_router_common_init(dev);
-}
-
ulong write_pirq_routing_table(ulong addr)
{
if (!gd->arch.pirq_routing_table)
diff --git a/arch/x86/cpu/quark/Makefile b/arch/x86/cpu/quark/Makefile
index 476e37c..7039f8b 100644
--- a/arch/x86/cpu/quark/Makefile
+++ b/arch/x86/cpu/quark/Makefile
@@ -2,6 +2,6 @@
#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
-obj-y += car.o dram.o irq.o msg_port.o quark.o
+obj-y += car.o dram.o msg_port.o quark.o
obj-y += mrc.o mrc_util.o hte.o smc.o
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o
diff --git a/arch/x86/cpu/quark/irq.c b/arch/x86/cpu/quark/irq.c
deleted file mode 100644
index 6928c33..0000000
--- a/arch/x86/cpu/quark/irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
- * Copyright (C) 2015 Google, Inc
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/irq.h>
-#include <asm/arch/device.h>
-#include <asm/arch/quark.h>
-
-int quark_irq_router_probe(struct udevice *dev)
-{
- struct quark_rcba *rcba;
- u32 base;
-
- qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
- base &= ~MEM_BAR_EN;
- rcba = (struct quark_rcba *)base;
-
- /*
- * Route Quark PCI device interrupt pin to PIRQ
- *
- * Route device#23's INTA/B/C/D to PIRQA/B/C/D
- * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
- */
- writew(PIRQC, &rcba->rmu_ir);
- writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
- &rcba->d23_ir);
- writew(PIRQD, &rcba->core_ir);
- writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
- &rcba->d20d21_ir);
-
- return irq_router_common_init(dev);
-}
-
-static const struct udevice_id quark_irq_router_ids[] = {
- { .compatible = "intel,quark-irq-router" },
- { }
-};
-
-U_BOOT_DRIVER(quark_irq_router_drv) = {
- .name = "quark_intel_irq",
- .id = UCLASS_IRQ,
- .of_match = quark_irq_router_ids,
- .probe = quark_irq_router_probe,
-};
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 46141c4..4fd6864 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -7,6 +7,7 @@
#include <mmc.h>
#include <asm/io.h>
#include <asm/ioapic.h>
+#include <asm/irq.h>
#include <asm/mrccache.h>
#include <asm/mtrr.h>
#include <asm/pci.h>
@@ -313,12 +314,37 @@
writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
}
+static void quark_irq_init(void)
+{
+ struct quark_rcba *rcba;
+ u32 base;
+
+ qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
+ base &= ~MEM_BAR_EN;
+ rcba = (struct quark_rcba *)base;
+
+ /*
+ * Route Quark PCI device interrupt pin to PIRQ
+ *
+ * Route device#23's INTA/B/C/D to PIRQA/B/C/D
+ * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
+ */
+ writew(PIRQC, &rcba->rmu_ir);
+ writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
+ &rcba->d23_ir);
+ writew(PIRQD, &rcba->core_ir);
+ writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
+ &rcba->d20d21_ir);
+}
+
int arch_early_init_r(void)
{
quark_pcie_init();
quark_usb_init();
+ quark_irq_init();
+
return 0;
}
diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile
index b535b2a..ac29613 100644
--- a/arch/x86/cpu/queensbay/Makefile
+++ b/arch/x86/cpu/queensbay/Makefile
@@ -2,5 +2,5 @@
#
# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-obj-y += fsp_configs.o irq.o
+obj-y += fsp_configs.o
obj-y += tnc.o
diff --git a/arch/x86/cpu/queensbay/irq.c b/arch/x86/cpu/queensbay/irq.c
deleted file mode 100644
index 208cd61..0000000
--- a/arch/x86/cpu/queensbay/irq.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
- * Copyright (C) 2015 Google, Inc
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/arch/device.h>
-#include <asm/arch/tnc.h>
-
-int queensbay_irq_router_probe(struct udevice *dev)
-{
- struct tnc_rcba *rcba;
- u32 base;
-
- dm_pci_read_config32(dev->parent, LPC_RCBA, &base);
- base &= ~MEM_BAR_EN;
- rcba = (struct tnc_rcba *)base;
-
- /* Make sure all internal PCI devices are using INTA */
- writel(INTA, &rcba->d02ip);
- writel(INTA, &rcba->d03ip);
- writel(INTA, &rcba->d27ip);
- writel(INTA, &rcba->d31ip);
- writel(INTA, &rcba->d23ip);
- writel(INTA, &rcba->d24ip);
- writel(INTA, &rcba->d25ip);
- writel(INTA, &rcba->d26ip);
-
- /*
- * Route TunnelCreek PCI device interrupt pin to PIRQ
- *
- * Since PCIe downstream ports received INTx are routed to PIRQ
- * A/B/C/D directly and not configurable, we have to route PCIe
- * root ports' INTx to PIRQ A/B/C/D as well. For other devices
- * on TunneCreek, route them to PIRQ E/F/G/H.
- */
- writew(PIRQE, &rcba->d02ir);
- writew(PIRQF, &rcba->d03ir);
- writew(PIRQG, &rcba->d27ir);
- writew(PIRQH, &rcba->d31ir);
- writew(PIRQA, &rcba->d23ir);
- writew(PIRQB, &rcba->d24ir);
- writew(PIRQC, &rcba->d25ir);
- writew(PIRQD, &rcba->d26ir);
-
- return irq_router_common_init(dev);
-}
-
-static const struct udevice_id queensbay_irq_router_ids[] = {
- { .compatible = "intel,queensbay-irq-router" },
- { }
-};
-
-U_BOOT_DRIVER(queensbay_irq_router_drv) = {
- .name = "queensbay_intel_irq",
- .id = UCLASS_IRQ,
- .of_match = queensbay_irq_router_ids,
- .probe = queensbay_irq_router_probe,
-};
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 439c14d..76556fc 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -98,6 +98,43 @@
return x86_cpu_init_f();
}
+static void tnc_irq_init(void)
+{
+ struct tnc_rcba *rcba;
+ u32 base;
+
+ pci_read_config32(TNC_LPC, LPC_RCBA, &base);
+ base &= ~MEM_BAR_EN;
+ rcba = (struct tnc_rcba *)base;
+
+ /* Make sure all internal PCI devices are using INTA */
+ writel(INTA, &rcba->d02ip);
+ writel(INTA, &rcba->d03ip);
+ writel(INTA, &rcba->d27ip);
+ writel(INTA, &rcba->d31ip);
+ writel(INTA, &rcba->d23ip);
+ writel(INTA, &rcba->d24ip);
+ writel(INTA, &rcba->d25ip);
+ writel(INTA, &rcba->d26ip);
+
+ /*
+ * Route TunnelCreek PCI device interrupt pin to PIRQ
+ *
+ * Since PCIe downstream ports received INTx are routed to PIRQ
+ * A/B/C/D directly and not configurable, we have to route PCIe
+ * root ports' INTx to PIRQ A/B/C/D as well. For other devices
+ * on TunneCreek, route them to PIRQ E/F/G/H.
+ */
+ writew(PIRQE, &rcba->d02ir);
+ writew(PIRQF, &rcba->d03ir);
+ writew(PIRQG, &rcba->d27ir);
+ writew(PIRQH, &rcba->d31ir);
+ writew(PIRQA, &rcba->d23ir);
+ writew(PIRQB, &rcba->d24ir);
+ writew(PIRQC, &rcba->d25ir);
+ writew(PIRQD, &rcba->d26ir);
+}
+
int arch_early_init_r(void)
{
int ret = 0;
@@ -106,5 +143,7 @@
ret = disable_igd();
#endif
+ tnc_irq_init();
+
return ret;
}
diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts
index 4fe076a..d8faa9d 100644
--- a/arch/x86/dts/crownbay.dts
+++ b/arch/x86/dts/crownbay.dts
@@ -151,7 +151,7 @@
#size-cells = <1>;
irq-router {
- compatible = "intel,queensbay-irq-router";
+ compatible = "intel,irq-router";
intel,pirq-config = "pci";
intel,actl-addr = <0x58>;
intel,pirq-link = <0x60 8>;
diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts
index d86fdc0..3454abd 100644
--- a/arch/x86/dts/galileo.dts
+++ b/arch/x86/dts/galileo.dts
@@ -97,7 +97,7 @@
#size-cells = <1>;
irq-router {
- compatible = "intel,quark-irq-router";
+ compatible = "intel,irq-router";
intel,pirq-config = "pci";
intel,actl-addr = <0x58>;
intel,pirq-link = <0x60 8>;
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 169b281..ad95bb4 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -58,11 +58,4 @@
#define PIRQ_BITMAP 0xdef8
-/**
- * irq_router_common_init() - Perform common x86 interrupt init
- *
- * This creates the PIRQ routing table and routes the IRQs
- */
-int irq_router_common_init(struct udevice *dev);
-
#endif /* _ARCH_IRQ_H_ */