gpio: qcom_pmic: drop gpio-count property
This property is not part of the dt bindings and all boards use the new
gpio-ranges property instead. Drop support for this.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
diff --git a/doc/device-tree-bindings/gpio/pm8916_gpio.txt b/doc/device-tree-bindings/gpio/pm8916_gpio.txt
deleted file mode 100644
index 58185b8..0000000
--- a/doc/device-tree-bindings/gpio/pm8916_gpio.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Driver for part of pm8916 PMIC - gpio and power/reset keys
-
-This device should be child of SPMI pmic.
-
-1) GPIO driver
-
-Required properties:
-- compatible: "qcom,pm8916-gpio"
-- reg: peripheral ID, size of register block
-- gpio-controller
-- gpio-count: number of GPIOs
-- #gpio-cells: 2
-
-Optional properties:
-- gpio-bank-name: name of bank (as default "pm8916" is used)
-
-Example:
-
-pmic_gpios: gpios@c000 {
- compatible = "qcom,pm8916-gpio";
- reg = <0xc000 0x400>;
- gpio-controller;
- gpio-count = <4>;
- #gpio-cells = <2>;
- gpio-bank-name="pmic";
-};
-
-
-2) Power/Reset key driver
-
-Required properties:
-- compatible: "qcom,pm8916-pwrkey"
-- reg: peripheral ID, size of register block
-- gpio-controller
-- #gpio-cells: 2
-
-Optional properties:
-- gpio-bank-name: name of bank (as default "pm8916_key" is used)
-
-
-Example:
-
-pmic_pon: pon@800 {
- compatible = "qcom,pm8916-pwrkey";
- reg = <0x800 0x96>;
- #gpio-cells = <2>;
- gpio-controller;
-};
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
index 54f4dbd..1adc656 100644
--- a/drivers/gpio/qcom_pmic_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -268,14 +268,11 @@
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
int ret;
- uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
- if (!uc_priv->gpio_count) {
- ret = qcom_gpio_of_parse_ranges(dev);
- if (ret > 0)
- uc_priv->gpio_count = ret;
- else
- return ret;
- }
+ ret = qcom_gpio_of_parse_ranges(dev);
+ if (ret > 0)
+ uc_priv->gpio_count = ret;
+ else
+ return ret;
uc_priv->bank_name = "pmic";