imx6: geam6ul: Add FEC support
Add FEC support for Engicam GEAM6UL module.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index d9e63ff..058b62d 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -197,6 +197,7 @@
select MX6UL
select OF_CONTROL
select DM
+ select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig
index e1e1dd2..d5be076 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -18,6 +18,8 @@
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -27,6 +29,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_I2C=y
CONFIG_OF_LIBFDT=y
+CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index b7a44c7..cc45602 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -18,9 +18,12 @@
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_LIBFDT=y
+CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_NAND_MXS=y
CONFIG_IMX_THERMAL=y
diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h
index 7cfdfef..48b1120 100644
--- a/include/configs/imx6ul_geam.h
+++ b/include/configs/imx6ul_geam.h
@@ -137,6 +137,16 @@
# define CONFIG_APBH_DMA_BURST8
#endif
+/* Ethernet */
+#ifdef CONFIG_FEC_MXC
+# define CONFIG_FEC_MXC_PHYADDR 0
+# define CONFIG_FEC_XCV_TYPE RMII
+
+# define CONFIG_MII
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_SMSC
+#endif
+
/* SPL */
#ifdef CONFIG_SPL
# ifdef CONFIG_NAND_MXS