dm: uclass: don't assign aliased seq numbers
If there are aliases for an uclass, set the base for the "dynamically"
allocated numbers next to the highest alias.
Please note, that this might lead to holes in the sequences, depending
on the device tree. For example if there is only an alias "ethernet1",
the next device seq number would be 2.
In particular this fixes a problem with boards which are using ethernet
aliases but also might have network add-in cards like the E1000. If the
board is started with the add-in card and depending on the order of the
drivers, the E1000 might occupy the first ethernet device and mess up
all the hardware addresses, because the devices are now shifted by one.
Also adapt the test cases to the new handling and add test cases
checking the holes in the seq numbers.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
Tested-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index b9255e4..a6e2bfd 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -23,8 +23,8 @@
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
- remoteproc1 = &rproc_1;
- remoteproc2 = &rproc_2;
+ remoteproc0 = &rproc_1;
+ remoteproc1 = &rproc_2;
rtc0 = &rtc_0;
rtc1 = &rtc_1;
spi0 = "/spi@0";
diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c
index 2ab419c..c3f1b73 100644
--- a/drivers/core/uclass.c
+++ b/drivers/core/uclass.c
@@ -689,13 +689,14 @@
int uclass_resolve_seq(struct udevice *dev)
{
+ struct uclass *uc = dev->uclass;
+ struct uclass_driver *uc_drv = uc->uc_drv;
struct udevice *dup;
- int seq;
+ int seq = 0;
int ret;
assert(dev->seq == -1);
- ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, dev->req_seq,
- false, &dup);
+ ret = uclass_find_device_by_seq(uc_drv->id, dev->req_seq, false, &dup);
if (!ret) {
dm_warn("Device '%s': seq %d is in use by '%s'\n",
dev->name, dev->req_seq, dup->name);
@@ -707,9 +708,17 @@
return ret;
}
- for (seq = 0; seq < DM_MAX_SEQ; seq++) {
- ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, seq,
- false, &dup);
+ if (CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_SEQ_ALIAS) &&
+ (uc_drv->flags & DM_UC_FLAG_SEQ_ALIAS)) {
+ /*
+ * dev_read_alias_highest_id() will return -1 if there no
+ * alias. Thus we can always add one.
+ */
+ seq = dev_read_alias_highest_id(uc_drv->name) + 1;
+ }
+
+ for (; seq < DM_MAX_SEQ; seq++) {
+ ret = uclass_find_device_by_seq(uc_drv->id, seq, false, &dup);
if (ret == -ENODEV)
break;
if (ret)
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 2a81f3a..528187e 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -94,9 +94,9 @@
#endif
#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \
- "eth1addr=00:00:11:22:33:45\0" \
- "eth3addr=00:00:11:22:33:46\0" \
- "eth5addr=00:00:11:22:33:47\0" \
+ "eth3addr=00:00:11:22:33:45\0" \
+ "eth5addr=00:00:11:22:33:46\0" \
+ "eth6addr=00:00:11:22:33:47\0" \
"ipaddr=1.2.3.4\0"
#define MEM_LAYOUT_ENV_SETTINGS \
diff --git a/test/dm/eth.c b/test/dm/eth.c
index 1fddcaa..b58c964 100644
--- a/test/dm/eth.c
+++ b/test/dm/eth.c
@@ -48,7 +48,7 @@
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", env_get("ethact"));
- env_set("ethact", "eth1");
+ env_set("ethact", "eth6");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10004000", env_get("ethact"));
@@ -105,7 +105,7 @@
const char *ethname[DM_TEST_ETH_NUM] = {"eth@10002000", "eth@10003000",
"sbe5", "eth@10004000"};
const char *addrname[DM_TEST_ETH_NUM] = {"ethaddr", "eth5addr",
- "eth3addr", "eth1addr"};
+ "eth3addr", "eth6addr"};
char ethaddr[DM_TEST_ETH_NUM][18];
int i;
@@ -188,15 +188,15 @@
/* Invalidate eth1's MAC address */
memset(ethaddr, '\0', sizeof(ethaddr));
- strncpy(ethaddr, env_get("eth1addr"), 17);
- /* Must disable access protection for eth1addr before clearing */
- env_set(".flags", "eth1addr");
- env_set("eth1addr", NULL);
+ strncpy(ethaddr, env_get("eth6addr"), 17);
+ /* Must disable access protection for eth6addr before clearing */
+ env_set(".flags", "eth6addr");
+ env_set("eth6addr", NULL);
retval = _dm_test_eth_rotate1(uts);
/* Restore the env */
- env_set("eth1addr", ethaddr);
+ env_set("eth6addr", ethaddr);
env_set("ethrotate", NULL);
if (!retval) {
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 4fcae03..51f2547 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -361,20 +361,32 @@
ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 2, &dev));
ut_asserteq_str("d-test", dev->name);
- /* d-test actually gets 0 */
- ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 0, &dev));
+ /*
+ * d-test actually gets 9, because thats the next free one after the
+ * aliases.
+ */
+ ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 9, &dev));
ut_asserteq_str("d-test", dev->name);
- /* initially no one wants seq 1 */
- ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 1,
+ /* initially no one wants seq 10 */
+ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 10,
&dev));
ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 4, &dev));
/* But now that it is probed, we can find it */
- ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, &dev));
+ ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev));
ut_asserteq_str("f-test", dev->name);
+ /*
+ * And we should still have holes in our sequence numbers, that is 2
+ * and 4 should not be used.
+ */
+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 2,
+ true, &dev));
+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 4,
+ true, &dev));
+
return 0;
}
DM_TEST(dm_test_fdt_uclass_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);