power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER
Rename all CONFIG_PMIC* defines to CONFIG_POWER*
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 7733e01..2723724 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -31,11 +31,11 @@
COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o
COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o
-COBJS-$(CONFIG_PMIC) += power_core.o
+COBJS-$(CONFIG_POWER) += power_core.o
COBJS-$(CONFIG_DIALOG_PMIC) += power_dialog.o
-COBJS-$(CONFIG_PMIC_FSL) += power_fsl.o
-COBJS-$(CONFIG_PMIC_I2C) += power_i2c.o
-COBJS-$(CONFIG_PMIC_SPI) += power_spi.o
+COBJS-$(CONFIG_POWER_FSL) += power_fsl.o
+COBJS-$(CONFIG_POWER_I2C) += power_i2c.o
+COBJS-$(CONFIG_POWER_SPI) += power_spi.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 9b71e55..e19a9a8 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -25,8 +25,8 @@
LIB := $(obj)libpmic.o
-COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o
-COBJS-$(CONFIG_PMIC_MAX8997) += pmic_max8997.o
+COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
+COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
COBJS := $(COBJS-y)
diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index 0275fd9..651f88f 100644
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -27,7 +27,7 @@
#include <fsl_pmic.h>
#include <errno.h>
-#if defined(CONFIG_PMIC_SPI)
+#if defined(CONFIG_POWER_SPI)
static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
{
return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF);
@@ -47,7 +47,7 @@
p->name = name;
p->number_of_regs = PMIC_NUM_OF_REGS;
-#if defined(CONFIG_PMIC_SPI)
+#if defined(CONFIG_POWER_SPI)
p->interface = PMIC_SPI;
p->bus = CONFIG_FSL_PMIC_BUS;
p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
@@ -56,13 +56,13 @@
p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN;
p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END;
p->hw.spi.prepare_tx = pmic_spi_prepare_tx;
-#elif defined(CONFIG_PMIC_I2C)
+#elif defined(CONFIG_POWER_I2C)
p->interface = PMIC_I2C;
p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = 3;
p->bus = bus;
#else
-#error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C"
+#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
#endif
return 0;