video: fsl_dcu_fb: add DM_VIDEO support
Extend the driver to build with DM_VIDEO enabled. DTS files
must additionally include 'u-boot,dm-pre-reloc' property in
soc and child nodes to enable driver binding to fsl_dcu_fb device.
Currently display timings aren't obtained from DT.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c3781b1..261fa98 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -484,7 +484,7 @@
config VIDEO_FSL_DCU_FB
bool "Enable Freescale Display Control Unit"
- depends on VIDEO
+ depends on VIDEO || DM_VIDEO
help
This enables support for Freescale Display Control Unit (DCU4)
module found on Freescale Vybrid and QorIQ family of SoCs.
diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c
index f789ec5..add64b8 100644
--- a/drivers/video/fsl_dcu_fb.c
+++ b/drivers/video/fsl_dcu_fb.c
@@ -8,10 +8,12 @@
#include <asm/io.h>
#include <common.h>
+#include <dm.h>
#include <fdt_support.h>
#include <fsl_dcu_fb.h>
#include <linux/fb.h>
#include <malloc.h>
+#include <video.h>
#include <video_fb.h>
#include "videomodes.h"
@@ -219,8 +221,6 @@
u32 ctrldescl[DCU_LAYER_MAX_NUM][16];
};
-static struct fb_info info;
-
static void reset_total_layers(void)
{
struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR;
@@ -302,7 +302,11 @@
{
struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR;
unsigned int div, mode;
-
+/*
+ * When DM_VIDEO is enabled reservation of framebuffer is done
+ * in advance during bind() call.
+ */
+#if !CONFIG_IS_ENABLED(DM_VIDEO)
fbinfo->screen_size = fbinfo->var.xres * fbinfo->var.yres *
(fbinfo->var.bits_per_pixel / 8);
@@ -310,13 +314,13 @@
fbinfo->screen_size = 0;
return -ENOMEM;
}
-
/* Reserve framebuffer at the end of memory */
gd->fb_base = gd->bd->bi_dram[0].start +
gd->bd->bi_dram[0].size - fbinfo->screen_size;
fbinfo->screen_base = (char *)gd->fb_base;
memset(fbinfo->screen_base, 0, fbinfo->screen_size);
+#endif
reset_total_layers();
@@ -429,24 +433,8 @@
options + 8, fsl_dcu_mode_db);
}
-void *video_hw_init(void)
-{
- static GraphicDevice ctfb;
-
- if (fsl_probe_common(&info, &ctfb.winSizeX, &ctfb.winSizeY) < 0)
- return NULL;
-
- ctfb.frameAdrs = (unsigned int)info.screen_base;
- ctfb.plnSizeX = ctfb.winSizeX;
- ctfb.plnSizeY = ctfb.winSizeY;
-
- ctfb.gdfBytesPP = 4;
- ctfb.gdfIndex = GDF_32BIT_X888RGB;
-
- ctfb.memSize = info.screen_size;
-
- return &ctfb;
-}
+#ifndef CONFIG_DM_VIDEO
+static struct fb_info info;
#if defined(CONFIG_OF_BOARD_SETUP)
int fsl_dcu_fixedfb_setup(void *blob)
@@ -470,3 +458,89 @@
return 0;
}
#endif
+
+void *video_hw_init(void)
+{
+ static GraphicDevice ctfb;
+
+ if (fsl_probe_common(&info, &ctfb.winSizeX, &ctfb.winSizeY) < 0)
+ return NULL;
+
+ ctfb.frameAdrs = (unsigned int)info.screen_base;
+ ctfb.plnSizeX = ctfb.winSizeX;
+ ctfb.plnSizeY = ctfb.winSizeY;
+
+ ctfb.gdfBytesPP = 4;
+ ctfb.gdfIndex = GDF_32BIT_X888RGB;
+
+ ctfb.memSize = info.screen_size;
+
+ return &ctfb;
+}
+
+#else /* ifndef CONFIG_DM_VIDEO */
+
+static int fsl_dcu_video_probe(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct fb_info fbinfo = { 0 };
+ unsigned int win_x;
+ unsigned int win_y;
+ u32 fb_start, fb_end;
+ int ret = 0;
+
+ fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
+ fb_end = plat->base + plat->size;
+ fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
+
+ fbinfo.screen_base = (char *)fb_start;
+ fbinfo.screen_size = plat->size;
+
+ ret = fsl_probe_common(&fbinfo, &win_x, &win_y);
+ if (ret < 0)
+ return ret;
+
+ uc_priv->bpix = VIDEO_BPP32;
+ uc_priv->xsize = win_x;
+ uc_priv->ysize = win_y;
+
+ /* Enable dcache for the frame buffer */
+ mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
+ DCACHE_WRITEBACK);
+ video_set_flush_dcache(dev, true);
+ return ret;
+}
+
+static int fsl_dcu_video_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ unsigned int win_x;
+ unsigned int win_y;
+ unsigned int depth = 0, freq = 0;
+ const char *options;
+ int ret = 0;
+
+ ret = video_get_video_mode(&win_x, &win_y, &depth, &freq, &options);
+ if (ret < 0)
+ return ret;
+
+ plat->size = win_x * win_y * 32;
+
+ return 0;
+}
+
+static const struct udevice_id fsl_dcu_video_ids[] = {
+ { .compatible = "fsl,vf610-dcu" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(fsl_dcu_video) = {
+ .name = "fsl_dcu_video",
+ .id = UCLASS_VIDEO,
+ .of_match = fsl_dcu_video_ids,
+ .bind = fsl_dcu_video_bind,
+ .probe = fsl_dcu_video_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif /* ifndef CONFIG_DM_VIDEO */