Patch by Martin Krause, 01 Apr 2005:
Add automatic HW detection for CMC_PU2 and CMC_BASIC
diff --git a/CHANGELOG b/CHANGELOG
index f6dd428..01af8dc 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,8 +2,9 @@
Changes for U-Boot 1.1.3:
======================================================================
-* Patch by Martin Krause, 01 Apr 2005:
- Fix flash erase timeout on CMC_PU2
+* Patches by Martin Krause, 01 Apr 2005:
+ - Fix flash erase timeout on CMC_PU2
+ - Add automatic HW detection for CMC_PU2 and CMC_BASIC
* Patch by Steven Scholz, 13 March 2005:
fix cache enabling for AT91RM9200
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
index f914d42..8e0f6d3 100644
--- a/board/cmc_pu2/cmc_pu2.c
+++ b/board/cmc_pu2/cmc_pu2.c
@@ -6,6 +6,8 @@
* Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn
* (2004) garyj@denx.de
*
+ * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -33,22 +35,67 @@
/*
* Miscelaneous platform dependent initialisations
*/
+#define CMC_BASIC 1
+#define CMC_PU2 2
+
+int hw_detect (void);
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
+ AT91PS_PIO piob = AT91C_BASE_PIOB;
+ AT91PS_PIO pioc = AT91C_BASE_PIOC;
/* Enable Ctrlc */
console_init_f ();
/* Correct IRDA resistor problem */
/* Set PA23_TXD in Output */
- (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
+ /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
- /* arch number of CMC_PU2-Board */
+ /* PIOB and PIOC clock enabling */
+ *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+ *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
+
+ /*
+ * configure PC0-PC3 as input without pull ups, so RS485 driver enable
+ * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated.
+ */
+ pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
+ AT91C_PIO_PC2 | AT91C_PIO_PC3;
+ pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
+ AT91C_PIO_PC2 | AT91C_PIO_PC3;
+ pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
+ AT91C_PIO_PC2 | AT91C_PIO_PC3;
+
+ /*
+ * On CMC-PU2 board configure PB3-PB6 to input without pull ups to
+ * clear the duo LEDs (the external pull downs assure a proper
+ * signal). On CMC-BASIC set PB3-PB6 to output and drive it
+ * high, to configure current meassurement on AINx.
+ */
+ if (hw_detect() & CMC_PU2) {
+ piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
+ AT91C_PIO_PB5 | AT91C_PIO_PB6;
+ }
+ else if (hw_detect() & CMC_BASIC) {
+ piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
+ AT91C_PIO_PB5 | AT91C_PIO_PB6;
+ piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
+ AT91C_PIO_PB5 | AT91C_PIO_PB6;
+ }
+ piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
+ AT91C_PIO_PB5 | AT91C_PIO_PB6;
+ piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
+ AT91C_PIO_PB5 | AT91C_PIO_PB6;
+
+ /*
+ * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in
+ * the linuxarm kernel, yet.
+ */
/* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */
gd->bd->bi_arch_number = 251;
/* adress of boot parameters */
@@ -65,3 +112,30 @@
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
}
+
+int checkboard (void)
+{
+ if (hw_detect() & CMC_PU2)
+ puts ("Board: CMC-PU2 (Rittal GmbH)\n");
+ else if (hw_detect() & CMC_BASIC)
+ puts ("Board: CMC-BASIC (Rittal GmbH)\n");
+ else
+ puts ("Board: unknown\n");
+ return 0;
+}
+
+int hw_detect (void)
+{
+ AT91PS_PIO pio = AT91C_BASE_PIOB;
+
+ /* PIOB clock enabling */
+ *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+
+ /* configure PB12 as input without pull up */
+ pio->PIO_ODR = AT91C_PIO_PB12;
+ pio->PIO_PPUDR = AT91C_PIO_PB12;
+ pio->PIO_PER = AT91C_PIO_PB12;
+
+ /* read board identification pin */
+ return ((pio->PIO_PDSR & AT91C_PIO_PB12) ? CMC_PU2 : CMC_BASIC);
+}
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 07ae112..f7e6d55 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -665,6 +665,10 @@
#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */
#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */
+#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) /* Pin Controlled by PB7 */
+#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) /* Pin Controlled by PB7 */
+#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB7 */
+#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB7 */
#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index a74fee1..ada8cc8 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -198,7 +198,7 @@
display_banner, /* say that we are here */
dram_init, /* configure available RAM banks */
display_dram_config,
-#if defined(CONFIG_VCMA9)
+#if defined(CONFIG_VCMA9) || defined (CONFIG_CMC_PU2)
checkboard,
#endif
NULL,