sunxi: video: Use video-mode/-timing from videomodes
Switch from fb_videomode to ctfb_res_modes and use the predefined videotimings
from videomodes.c, rather then defining our own.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Anatolij Gustschin <agust@denx.de>
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 00b563f..42b1eaa 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -39,7 +39,7 @@
obj-$(CONFIG_VIDEO_SED13806) += sed13806.o
obj-$(CONFIG_VIDEO_SM501) += sm501.o
obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
-obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o videomodes.o
obj-$(CONFIG_VIDEO_TEGRA) += tegra.o
obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
obj-$(CONFIG_VIDEO_X86) += x86_fb.o
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index d241397..cedb56e 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -15,8 +15,8 @@
#include <asm/io.h>
#include <fdtdec.h>
#include <fdt_support.h>
-#include <linux/fb.h>
#include <video_fb.h>
+#include "videomodes.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -97,7 +97,7 @@
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE);
}
-static void sunxi_composer_mode_set(struct fb_videomode *mode,
+static void sunxi_composer_mode_set(const struct ctfb_res_modes *mode,
unsigned int address)
{
struct sunxi_de_be_reg * const de_be =
@@ -205,7 +205,7 @@
writel(0xffffffff, &lcdc->tcon1_io_tristate);
}
-static void sunxi_lcdc_mode_set(struct fb_videomode *mode,
+static void sunxi_lcdc_mode_set(const struct ctfb_res_modes *mode,
int *clk_div, int *clk_double)
{
struct sunxi_lcdc_reg * const lcdc =
@@ -240,7 +240,7 @@
writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
&lcdc->tcon1_timing_sync);
- sunxi_lcdc_pll_set(mode->pixclock, clk_div, clk_double);
+ sunxi_lcdc_pll_set(mode->pixclock_khz, clk_div, clk_double);
}
#ifdef CONFIG_MACH_SUN6I
@@ -255,7 +255,7 @@
}
#endif
-static void sunxi_hdmi_mode_set(struct fb_videomode *mode,
+static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode,
int clk_div, int clk_double)
{
struct sunxi_hdmi_reg * const hdmi =
@@ -310,7 +310,7 @@
#endif
}
-static void sunxi_mode_set(struct fb_videomode *mode, unsigned int address)
+static void sunxi_mode_set(const struct ctfb_res_modes *mode, unsigned int address)
{
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
@@ -358,26 +358,7 @@
void *video_hw_init(void)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
- /*
- * Vesa standard 1024x768@60
- * 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
- */
- struct fb_videomode mode = {
- .name = "1024x768",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 65000,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = 0,
- .vmode = 0,
- .flag = 0,
- };
+ const struct ctfb_res_modes *mode = &res_mode_init[RES_MODE_1024x768];
int ret;
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
@@ -393,9 +374,9 @@
printf("HDMI connected.\n");
sunxi_display.enabled = true;
- printf("Setting up a %s console.\n", mode.name);
+ printf("Setting up a %dx%d console.\n", mode->xres, mode->yres);
sunxi_engines_init();
- sunxi_mode_set(&mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
+ sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
/*
* These are the only members of this structure that are used. All the
@@ -405,8 +386,8 @@
graphic_device->frameAdrs = gd->fb_base;
graphic_device->gdfIndex = GDF_32BIT_X888RGB;
graphic_device->gdfBytesPP = 4;
- graphic_device->winSizeX = mode.xres;
- graphic_device->winSizeY = mode.yres;
+ graphic_device->winSizeX = mode->xres;
+ graphic_device->winSizeY = mode->yres;
return graphic_device;
}