arm64: zynqmp: Add generic a2197 system controller config
Add generic configuration for a2197-p/-m/-g boards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 62da168..78c0b09 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -247,6 +247,7 @@
dtb-$(CONFIG_ARCH_ZYNQMP) += \
avnet-ultra96-rev1.dtb \
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \
+ zynqmp-a2197-revA.dtb \
zynqmp-mini.dtb \
zynqmp-mini-emmc0.dtb \
zynqmp-mini-emmc1.dtb \
diff --git a/arch/arm/dts/zynqmp-a2197-revA.dts b/arch/arm/dts/zynqmp-a2197-revA.dts
new file mode 100644
index 0000000..3153138
--- /dev/null
+++ b/arch/arm/dts/zynqmp-a2197-revA.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevA System Controller
+ *
+ * (C) Copyright 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Versal System Controller on a2197 board RevA";
+ compatible = "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+ aliases {
+ i2c0 = &i2c0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ xlnx,eeprom = <&eeprom1 &eeprom0 &eeprom0>;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&uart0 { /* uart0 MIO38-39 */
+ status = "okay";
+ u-boot,dm-pre-reloc;
+};
+
+&i2c0 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ clock-frequency = <400000>;
+ i2c-mux@74 { /* this cover MGT board */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ u-boot,dm-pre-reloc;
+ /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* Use for storing information about SC board */
+ eeprom0: eeprom@50 { /* u96 - 24LC32A - 256B */
+ compatible = "atmel,24c32";
+ u-boot,dm-pre-reloc;
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ clock-frequency = <400000>;
+ i2c-mux@74 { /* This cover processor board */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ u-boot,dm-pre-reloc;
+ /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* Use for storing information about SC board */
+ eeprom1: eeprom@50 { /* u96 - 24LC32A - 256B */
+ compatible = "atmel,24c32";
+ u-boot,dm-pre-reloc;
+ reg = <0x50>;
+ };
+ };
+ };
+};