omap3evm: Update ethernet reset sequence for Rev.G board
The GPIO pin used for resetting the external LAN chip has
changed for Rev.G board.
The patch uses generic gpio API instead of direct access
to corresponding registers.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 8f9f141..2c95fae 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -33,10 +33,14 @@
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/gpio.h>
#include <i2c.h>
#include <asm/mach-types.h>
#include "evm.h"
+#define OMAP3EVM_GPIO_ETH_RST_GEN1 64
+#define OMAP3EVM_GPIO_ETH_RST_GEN2 7
+
DECLARE_GLOBAL_DATA_PTR;
static u32 omap3_evm_version;
@@ -181,17 +185,30 @@
*/
static void reset_net_chip(void)
{
- struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
+ int ret;
+ int rst_gpio;
- /* Make GPIO 64 as output pin */
- writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
+ if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN1;
+ } else {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
+ }
- /* Now send a pulse on the GPIO pin */
- writel(GPIO0, &gpio3_base->setdataout);
+ ret = omap_request_gpio(rst_gpio);
+ if (ret < 0) {
+ printf("Unable to get GPIO %d\n", rst_gpio);
+ return ;
+ }
+
+ /* Configure as output */
+ omap_set_gpio_direction(rst_gpio, 0);
+
+ /* Send a pulse on the GPIO pin */
+ omap_set_gpio_dataout(rst_gpio, 1);
udelay(1);
- writel(GPIO0, &gpio3_base->cleardataout);
+ omap_set_gpio_dataout(rst_gpio, 0);
udelay(1);
- writel(GPIO0, &gpio3_base->setdataout);
+ omap_set_gpio_dataout(rst_gpio, 1);
}
int board_eth_init(bd_t *bis)