rockchip: rk3188: Move SoC one time setting into arch_cpu_init()
The setting for noc remap should goto arch_cpu_init().
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c
index 94fd6c0..5b6f215 100644
--- a/arch/arm/mach-rockchip/rk3188-board.c
+++ b/arch/arm/mach-rockchip/rk3188-board.c
@@ -7,13 +7,9 @@
#include <clk.h>
#include <dm.h>
#include <ram.h>
-#include <syscon.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/grf_rk3188.h>
#include <asm/arch-rockchip/periph.h>
-#include <asm/arch-rockchip/pmu_rk3288.h>
#include <asm/arch-rockchip/boot_mode.h>
__weak int rk_board_late_init(void)
@@ -23,18 +19,7 @@
int board_late_init(void)
{
- struct rk3188_grf *grf;
-
setup_boot_mode();
- grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
- if (IS_ERR(grf)) {
- pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
- } else {
- /* enable noc remap to mimic legacy loaders */
- rk_clrsetreg(&grf->soc_con0,
- NOC_REMAP_MASK << NOC_REMAP_SHIFT,
- NOC_REMAP_MASK << NOC_REMAP_SHIFT);
- }
return rk_board_late_init();
}
diff --git a/arch/arm/mach-rockchip/rk3188/rk3188.c b/arch/arm/mach-rockchip/rk3188/rk3188.c
index 08792f1..95f0e3c 100644
--- a/arch/arm/mach-rockchip/rk3188/rk3188.c
+++ b/arch/arm/mach-rockchip/rk3188/rk3188.c
@@ -3,8 +3,11 @@
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
+#include <dm.h>
+#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3188.h>
#include <asm/arch-rockchip/hardware.h>
@@ -42,11 +45,17 @@
}
#endif
+#ifdef CONFIG_SPL_BUILD
int arch_cpu_init(void)
{
-#ifdef CONFIG_ROCKCHIP_USB_UART
- struct rk3188_grf * const grf = (void *)GRF_BASE;
+ struct rk3188_grf *grf;
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ if (IS_ERR(grf)) {
+ pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
+ return 0;
+ }
+#ifdef CONFIG_ROCKCHIP_USB_UART
rk_clrsetreg(&grf->uoc0_con[0],
SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK,
1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT |
@@ -64,8 +73,15 @@
BYPASSSEL_MASK | BYPASSDMEN_MASK,
1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT);
#endif
+
+ /* enable noc remap to mimic legacy loaders */
+ rk_clrsetreg(&grf->soc_con0,
+ NOC_REMAP_MASK << NOC_REMAP_SHIFT,
+ NOC_REMAP_MASK << NOC_REMAP_SHIFT);
+
return 0;
}
+#endif
#ifdef CONFIG_SPL_BUILD
static int setup_led(void)