Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
Patch by Steven Blakeslee, 27 Jul 2005
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
new file mode 100644
index 0000000..840a46c
--- /dev/null
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -0,0 +1,426 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
+
+ mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+
+ mtebc(pb1ap, 0x00000000);
+ mtebc(pb1cr, 0x00000000);
+
+ mtebc(pb2ap, 0x04814500);
+ /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
+
+ mtebc(pb3ap, 0x00000000);
+ mtebc(pb3cr, 0x00000000);
+
+ mtebc(pb4ap, 0x00000000);
+ mtebc(pb4cr, 0x00000000);
+
+ mtebc(pb5ap, 0x00000000);
+ mtebc(pb5cr, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /*CPLD cs */
+ /*setup Address lines for flash sizes larger than 16Meg. */
+ out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+ /*setup emac */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+ out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+ /*UART1 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+ out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+ /*setup USB 2.0 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+ out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+ /*--------------------------------------------------------------------
+ * Setup other serial configuration
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
+ mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
+ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
+
+ /*clear tmrclk divisor */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /*enable ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+ /*enable usb 1.1 fs device and remove usb 2.0 reset */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+ /*get rid of flash write protect */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+
+ printf("Board: AMCC YELLOWSTONE\n");
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+ return (0);
+}
+
+/*************************************************************************
+ * sdram_init -- doesn't use serial presence detect.
+ *
+ * Assumes: 256 MB, ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_clktr, 0x40000000); /* ?? */
+ mtsdram(mem_wddctr, 0x40000000); /* ?? */
+
+ /*clear this first, if the DDR is enabled by a debugger
+ then you can not make changes. */
+ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+ mtsdram(mem_tr0, 0x410a4012); /* ?? */
+ mtsdram(mem_tr1, 0x8080080b); /* ?? */
+ mtsdram(mem_rtr, 0x04080000); /* ?? */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram(mem_cfg0, 0x84000000); /* Enable */
+
+ for (;;) {
+ mfsdram(mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ sdram_init();
+ return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long strap;
+ unsigned long addr;
+
+ /*--------------------------------------------------------------------------+
+ * Bamboo is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ u16 cmdstat;
+
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 EP PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Bamboo is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+}
+#endif