Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
Patch by Steven Blakeslee, 27 Jul 2005
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 0d6d88a..7a4af75 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -194,7 +194,96 @@
#elif defined(CONFIG_440)
-#if !defined(CONFIG_440_GX)
+
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfclk(clk_plld, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfclk(clk_opbd, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfclk(clk_perd, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfclk(clk_primbd, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfclk(clk_spcid, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(sdr_sdstp0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfclk(clk_pllc, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+
+ /* Figure which timer source to use */
+ if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440_GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
@@ -220,8 +309,8 @@
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;