configs: convert CONFIG_SYS_MPUCLK to Kconfig
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/README b/README
index 685a822..2ca0102 100644
--- a/README
+++ b/README
@@ -4512,11 +4512,6 @@
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.
-- CONFIG_SYS_MPUCLK
- Defines the MPU clock speed (in MHz).
-
- NOTE : currently only supported on AM335x platforms.
-
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
Enables the RTC32K OSC on AM33xx based plattforms
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 4c9352a..c06b01b 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -19,11 +19,6 @@
#define MPUPLL_M_550 550
#define MPUPLL_M_300 300
-/* MAIN PLL Fdll = 550 MHz, by default */
-#ifndef CONFIG_SYS_MPUCLK
-#define CONFIG_SYS_MPUCLK MPUPLL_M_550
-#endif
-
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5bca20e..d3f3802 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -148,6 +148,11 @@
endchoice
+config SYS_MPUCLK
+ int "MPU CLK speed"
+ default 550
+ help
+ Defines the MPU clock speed (in MHz).
config TI_SECURE_DEVICE
bool "HS Device Type Support"
diff --git a/configs/draco_defconfig b/configs/draco_defconfig
index ea678b6..2ecdd3c 100644
--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_DRACO=y
+CONFIG_SYS_MPUCLK=300
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index 39d3ad1..7e0b192 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_ETAMIN=y
+CONFIG_SYS_MPUCLK=300
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index 5b7c5ef..c40684a 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_PXM2=y
+CONFIG_SYS_MPUCLK=720
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
index 084c03c..01848c5 100644
--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_RASTABAN=y
+CONFIG_SYS_MPUCLK=300
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index 3328996..f09a67e 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_RUT=y
+CONFIG_SYS_MPUCLK=600
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
index a20c4df..dd61ead 100644
--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -5,6 +5,7 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_THUBAN=y
+CONFIG_SYS_MPUCLK=300
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/include/configs/draco.h b/include/configs/draco.h
index da77c45..896d14f 100644
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -18,7 +18,6 @@
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 3383f06..40c5794 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -69,7 +69,6 @@
CONFIG_SYS_NAND_BASE2}
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index c8bc8f3..57f034f 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -19,7 +19,6 @@
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 720
#define DDR_IOCTRL_VAL 0x18b
#define DDR_PLL_FREQ 266
diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h
index 16ed1f0..99fe161 100644
--- a/include/configs/rastaban.h
+++ b/include/configs/rastaban.h
@@ -15,7 +15,6 @@
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
diff --git a/include/configs/rut.h b/include/configs/rut.h
index bd819f1..8cfb73d 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -19,7 +19,6 @@
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 600
#define RUT_IOCTRL_VAL 0x18b
#define DDR_PLL_FREQ 303
diff --git a/include/configs/thuban.h b/include/configs/thuban.h
index 9b73828..8c37d7c 100644
--- a/include/configs/thuban.h
+++ b/include/configs/thuban.h
@@ -15,7 +15,6 @@
#include "siemens-am33x-common.h"
-#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index cd0165f..3eba402 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4869,7 +4869,6 @@
CONFIG_SYS_MPTPR_2BK_2K
CONFIG_SYS_MPTPR_2BK_4K
CONFIG_SYS_MPTPR_2BK_8K
-CONFIG_SYS_MPUCLK
CONFIG_SYS_MRAM_BASE
CONFIG_SYS_MRAM_SIZE
CONFIG_SYS_MRS_OFFS