eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usage
At this point in time, there's no systems with "U-Boot environment
exists on an EEPROM which is accessed over the I2C bus" that sets this
option. Drop it.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index efd6f3a..447bc15 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -53,13 +53,12 @@
* for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
* 0x00000nxx for EEPROM address selectors and page number at n.
*/
-#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
- (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
- (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
+#if !defined(CONFIG_SPI) && \
+ (!defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
+ (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2))
#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
#endif
-#endif
#if CONFIG_IS_ENABLED(DM_I2C)
static int eeprom_i2c_bus;
diff --git a/env/Kconfig b/env/Kconfig
index c0dff1f..760e625 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -44,10 +44,6 @@
still be one byte because the extra address bits are hidden
in the chip address.
- - CONFIG_ENV_EEPROM_IS_ON_I2C
- define this, if you have I2C and SPI activated, and your
- EEPROM, which holds the environment, is on the I2C bus.
-
- CONFIG_I2C_ENV_EEPROM_BUS
if you have an Environment on an EEPROM reached over
I2C muxes, you can define here, how to reach this
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ad5616d..c7277cb 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -168,7 +168,6 @@
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h
index 16849d8..449621f 100644
--- a/include/configs/am335x_sl50.h
+++ b/include/configs/am335x_sl50.h
@@ -55,7 +55,6 @@
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 31a1c7e..c068131 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -21,7 +21,6 @@
#endif
/* I2C Configuration */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index c47ffcc..88ade6a 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -22,7 +22,6 @@
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 42a5abd..448b454 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -204,7 +204,6 @@
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index a496a80..d1686d5 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -201,7 +201,6 @@
#define CONFIG_VIDEO_BMP_LOGO
/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 342cc7f..10a6c0a 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -128,7 +128,6 @@
/* Status LED polarity is inversed, so init it in the "off" state */
/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 73205d0..681c73d 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -114,7 +114,6 @@
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index cc18bce..ced7e47 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -31,7 +31,6 @@
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 179e145..5f06a8d 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -143,7 +143,6 @@
#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */
#else
#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_EEPROM_WREN
#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
#endif
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index fc2b343..8d84ebd 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -124,7 +124,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
/* NAND Configuration */
#define CONFIG_KEYSTONE_RBL_NAND