arm64: zynqmp: spl: install a PMU firmware config object at runtime
Optionally allow U-Boot to load a configuration object into the Power
Management Unit (PMU) firmware on Xilinx ZynqMP.
The configuration object is required by the PMU FW to enable most SoC
peripherals. So far the only way to boot using U-Boot SPL was to hard-code
the configuration object in the PMU firmware. Allow a different boot
process, where the PMU FW is equal for any ZynqMP chip and its
configuration is passed at runtime by U-Boot SPL.
All the code for Inter-processor communication with the PMU is isolated in
a new file (pmu_ipc.c). The code is inspired by the same feature as
implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted
Firmware:
* https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295
* https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357
SPL logs on the console before loading the configuration object:
U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200)
Loading PMUFW cfg obj (2008 bytes)
EL Level: EL3
...
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 80f8ca7..b4d39ed 100644
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -33,6 +33,11 @@
obj-y += $(init-objs)
endif
+ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
+obj-$(CONFIG_SPL_BUILD) += pm_cfg_obj.o
+$(obj)/pm_cfg_obj.o: $(shell cd $(srctree); readlink -f $(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE)) FORCE
+endif
+
obj-$(CONFIG_MMC_SDHCI_ZYNQ) += tap_delays.o
ifndef CONFIG_SPL_BUILD
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.S b/board/xilinx/zynqmp/pm_cfg_obj.S
new file mode 100644
index 0000000..c4ca77e
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+.section .rodata
+
+.global zynqmp_pm_cfg_obj
+.type zynqmp_pm_cfg_obj, @object
+.global zynqmp_pm_cfg_obj_size
+.type zynqmp_pm_cfg_obj_size, @object
+
+zynqmp_pm_cfg_obj:
+.align 4
+.incbin CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE
+
+zynqmp_pm_cfg_obj_end:
+
+zynqmp_pm_cfg_obj_size:
+.int zynqmp_pm_cfg_obj_end - zynqmp_pm_cfg_obj
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.h b/board/xilinx/zynqmp/pm_cfg_obj.h
new file mode 100644
index 0000000..86e7854
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Luca Ceresoli <luca@lucaceresoli.net>
+ *
+ * Declaration of PMU config object binary blob linked in at build time.
+ */
+
+extern const u32 zynqmp_pm_cfg_obj[];
+extern const int zynqmp_pm_cfg_obj_size;
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index c840e92..057ca1f 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -22,6 +22,8 @@
#include <zynqmppl.h>
#include <g_dnl.h>
+#include "pm_cfg_obj.h"
+
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
@@ -327,6 +329,13 @@
int board_init(void)
{
+#if defined(CONFIG_SPL_BUILD)
+ /* Check *at build time* if the filename is an non-empty string */
+ if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
+ zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
+ zynqmp_pm_cfg_obj_size);
+#endif
+
printf("EL Level:\tEL%d\n", current_el());
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \