net: e1000: Add Kconfig options
Add Kconfig options in preparation for moving boards to use Kconfig.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/README b/README
index 95f2d9d..a52ff46 100644
--- a/README
+++ b/README
@@ -1382,9 +1382,6 @@
Management command for E1000 devices. When used on devices
with SPI support you can reprogram the EEPROM from U-Boot.
- CONFIG_E1000_FALLBACK_MAC
- default MAC for empty EEPROM after production.
-
CONFIG_EEPRO100
Support for Intel 82557/82559/82559ER chips.
Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce76a02..7367d9e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -20,6 +20,38 @@
if NETDEVICES
+config E1000
+ bool "Intel PRO/1000 Gigabit Ethernet support"
+ help
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config E1000_SPI_GENERIC
+ bool "Allow access to the Intel 8257x SPI bus"
+ depends on E1000
+ help
+ Allow generic access to the SPI bus on the Intel 8257x, for
+ example with the "sspi" command.
+
+config E1000_SPI
+ bool "Enable SPI bus utility code"
+ depends on E1000
+ help
+ Utility code for direct access to the SPI bus on Intel 8257x.
+ This does not do anything useful unless you set at least one
+ of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+config CMD_E1000
+ bool "Enable the e1000 command"
+ depends on E1000
+ help
+ This enables the 'e1000' management command for E1000 devices. When
+ used on devices with SPI support you can reprogram the EEPROM from
+ U-Boot.
+
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 412ed14..6f74d30 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1221,13 +1221,6 @@
if (e1000_is_second_port(hw))
enetaddr[5] ^= 1;
-#ifdef CONFIG_E1000_FALLBACK_MAC
- if (!is_valid_ethaddr(nic->enetaddr)) {
- unsigned char fb_mac[NODE_ADDRESS_SIZE] = CONFIG_E1000_FALLBACK_MAC;
-
- memcpy(enetaddr, fb_mac, NODE_ADDRESS_SIZE);
- }
-#endif
return 0;
}
#endif