| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <init.h> |
| #include <log.h> |
| #include <misc.h> |
| #include <spl.h> |
| #include <syscon.h> |
| #include <u-boot/crc.h> |
| #include <usb.h> |
| #include <dm/pinctrl.h> |
| #include <dm/uclass-internal.h> |
| #include <asm/io.h> |
| #include <asm/setup.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/grf_rk3399.h> |
| #include <asm/arch-rockchip/periph.h> |
| #include <asm/arch-rockchip/misc.h> |
| #include <power/regulator.h> |
| #include <u-boot/sha256.h> |
| |
| static void setup_iodomain(void) |
| { |
| const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3; |
| struct rk3399_grf_regs *grf = |
| syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| |
| /* |
| * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6). |
| * Linux assumes that PCIE_RST# works out of the box as it probes |
| * PCIe before loading the iodomain driver. |
| */ |
| rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT); |
| } |
| |
| /* |
| * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. |
| * |
| * If bootsource is uSD-card we can assume that we want to use the |
| * SD-Card instead of the eMMC as first boot_target for distroboot. |
| * We only want to swap the defaults and not any custom environment a |
| * user has set. We exit early if a changed boot_targets environment |
| * is detected. |
| */ |
| static int setup_boottargets(void) |
| { |
| const char *boot_device = |
| ofnode_read_chosen_string("u-boot,spl-boot-device"); |
| char *env_default, *env; |
| |
| if (!boot_device) { |
| debug("%s: /chosen/u-boot,spl-boot-device not set\n", |
| __func__); |
| return -1; |
| } |
| debug("%s: booted from %s\n", __func__, boot_device); |
| |
| env_default = env_get_default("boot_targets"); |
| env = env_get("boot_targets"); |
| if (!env) { |
| debug("%s: boot_targets does not exist\n", __func__); |
| return -1; |
| } |
| debug("%s: boot_targets current: %s - default: %s\n", |
| __func__, env, env_default); |
| |
| if (strcmp(env_default, env) != 0) { |
| debug("%s: boot_targets not default, don't change it\n", |
| __func__); |
| return 0; |
| } |
| |
| /* |
| * Make the default boot medium between SD Card and eMMC, the one that |
| * was used to load U-Boot proper. If SPI-NOR flash was used, keep |
| * original default order. |
| */ |
| if (strcmp(boot_device, "/spi@ff1d0000/flash@0")) { |
| bool sd_booted = !strcmp(boot_device, "/mmc@fe320000"); |
| char *mmc0, *mmc1; |
| |
| debug("%s: booted from %s\n", __func__, |
| sd_booted ? "SD-Card" : "eMMC"); |
| mmc0 = strstr(env, "mmc0"); |
| mmc1 = strstr(env, "mmc1"); |
| |
| if (!mmc0 || !mmc1) { |
| debug("%s: only one mmc boot_target found\n", __func__); |
| return -1; |
| } |
| |
| /* |
| * If mmc0 comes first in the boot order and U-Boot proper was |
| * loaded from mmc1, swap mmc0 and mmc1 in the list. |
| * If mmc1 comes first in the boot order and U-Boot proper was |
| * loaded from mmc0, swap mmc0 and mmc1 in the list. |
| */ |
| if ((mmc0 < mmc1 && sd_booted) || |
| (mmc0 > mmc1 && !sd_booted)) { |
| mmc0[3] = '1'; |
| mmc1[3] = '0'; |
| debug("%s: set boot_targets to: %s\n", __func__, env); |
| env_set("boot_targets", env); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int mmc_get_env_dev(void) |
| { |
| const char *boot_device = |
| ofnode_read_chosen_string("u-boot,spl-boot-device"); |
| |
| if (!boot_device) { |
| debug("%s: /chosen/u-boot,spl-boot-device not set\n", |
| __func__); |
| return CONFIG_SYS_MMC_ENV_DEV; |
| } |
| |
| debug("%s: booted from %s\n", __func__, boot_device); |
| |
| if (!strcmp(boot_device, "/mmc@fe320000")) |
| return 1; |
| |
| if (!strcmp(boot_device, "/mmc@fe330000")) |
| return 0; |
| |
| return CONFIG_SYS_MMC_ENV_DEV; |
| } |
| |
| #if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE) |
| #error Please enable CONFIG_ENV_IS_NOWHERE |
| #endif |
| |
| enum env_location arch_env_get_location(enum env_operation op, int prio) |
| { |
| const char *boot_device = |
| ofnode_read_chosen_string("u-boot,spl-boot-device"); |
| |
| if (prio > 0) |
| return ENVL_UNKNOWN; |
| |
| if (!boot_device) { |
| debug("%s: /chosen/u-boot,spl-boot-device not set\n", |
| __func__); |
| return ENVL_NOWHERE; |
| } |
| |
| debug("%s: booted from %s\n", __func__, boot_device); |
| |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) && |
| !strcmp(boot_device, "/spi@ff1d0000/flash@0")) |
| return ENVL_SPI_FLASH; |
| |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) && |
| (!strcmp(boot_device, "/mmc@fe320000") || |
| !strcmp(boot_device, "/mmc@fe330000"))) |
| return ENVL_MMC; |
| |
| printf("%s: No environment available: booted from %s but U-Boot " |
| "config does not allow loading environment from it.", |
| __func__, boot_device); |
| |
| return ENVL_NOWHERE; |
| } |
| |
| int misc_init_r(void) |
| { |
| const u32 cpuid_offset = 0x7; |
| const u32 cpuid_length = 0x10; |
| u8 cpuid[cpuid_length]; |
| int ret; |
| |
| ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); |
| if (ret) |
| return ret; |
| |
| ret = rockchip_cpuid_set(cpuid, cpuid_length); |
| if (ret) |
| return ret; |
| |
| ret = rockchip_setup_macaddr(); |
| if (ret) |
| return ret; |
| |
| setup_iodomain(); |
| setup_boottargets(); |
| |
| return 0; |
| } |