powerpc: Enable device tree support for P2041RDB
Add device tree for P1041RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index bee1e2d..3123249 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -3,6 +3,7 @@
dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
dtb-$(CONFIG_TARGET_P2020RDB) += p2020rdb-pc.dtb p2020rdb-pc_36b.dtb
+dtb-$(CONFIG_TARGET_P2041RDB) += p2041rdb.dtb
dtb-$(CONFIG_TARGET_T1024RDB) += t1024rdb.dtb
dtb-$(CONFIG_TARGET_T1042D4RDB) += t1042d4rdb.dtb
dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb
diff --git a/arch/powerpc/dts/e500mc_power_isa.dtsi b/arch/powerpc/dts/e500mc_power_isa.dtsi
new file mode 100644
index 0000000..e486ae5
--- /dev/null
+++ b/arch/powerpc/dts/e500mc_power_isa.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * e500mc Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2019 NXP
+ */
+
+/ {
+ cpus {
+ power-isa-version = "2.06";
+ power-isa-b; // Base
+ power-isa-e; // Embedded
+ power-isa-atb; // Alternate Time Base
+ power-isa-cs; // Cache Specification
+ power-isa-ds; // Decorated Storage
+ power-isa-e.ed; // Embedded.Enhanced Debug
+ power-isa-e.pd; // Embedded.External PID
+ power-isa-e.hv; // Embedded.Hypervisor
+ power-isa-e.le; // Embedded.Little-Endian
+ power-isa-e.pm; // Embedded.Performance Monitor
+ power-isa-e.pc; // Embedded.Processor Control
+ power-isa-ecl; // Embedded Cache Locking
+ power-isa-exp; // External Proxy
+ power-isa-fp; // Floating Point
+ power-isa-fp.r; // Floating Point.Record
+ power-isa-mmc; // Memory Coherence
+ power-isa-scpm; // Store Conditional Page Mobility
+ power-isa-wt; // Wait
+ fsl,eref-deo; // Data Cache Extended Operations
+ mmu-type = "power-embedded";
+ };
+};
diff --git a/arch/powerpc/dts/p2041.dtsi b/arch/powerpc/dts/p2041.dtsi
new file mode 100644
index 0000000..9aa0422
--- /dev/null
+++ b/arch/powerpc/dts/p2041.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ fsl,portid-mapping = <0x40000000>;
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ fsl,portid-mapping = <0x20000000>;
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ fsl,portid-mapping = <0x10000000>;
+ };
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/p2041rdb.dts b/arch/powerpc/dts/p2041rdb.dts
new file mode 100644
index 0000000..6e9d9c0
--- /dev/null
+++ b/arch/powerpc/dts/p2041rdb.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * P2041RDB Device Tree Source
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2019 NXP
+ */
+
+/include/ "p2041.dtsi"
+
+/ {
+ model = "fsl,P2041RDB";
+ compatible = "fsl,P2041RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+};
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 9b5539f..79f77e4 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -85,6 +85,24 @@
SW1[1-5] = 10100
Note: 1 stands for 'on', 0 stands for 'off'
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for p2041rdb for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="p2041rdb" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+ CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig, use 'u-boot-with-dtb.bin'
+instead of u-boot.bin for all boot.
+
CPLD command
============
The CPLD is used to control the power sequence and some serdes lane
diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index e42fac3..3ffc56a 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -2,6 +2,7 @@
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_P2041RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -23,6 +24,8 @@
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_ENV_IS_IN_NAND=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -46,4 +49,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig
index c339f1b..1816aa8 100644
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@@ -2,6 +2,7 @@
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_P2041RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -23,6 +24,8 @@
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -45,4 +48,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig
index f164b1f..389e1fa 100644
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@@ -2,6 +2,7 @@
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_P2041RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -23,6 +24,8 @@
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -45,4 +48,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig
index f322c93..1fda0f9 100644
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@@ -2,6 +2,7 @@
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_P2041RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -22,6 +23,8 @@
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -44,4 +47,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y