ARM: dts: sam9x60: use CCF compatibles for PMC
Use CCF compatible for PMC. With this, the board/SoC will be
able to boot.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
index 6eac2a8..7f3eae3 100644
--- a/arch/arm/dts/sam9x60.dtsi
+++ b/arch/arm/dts/sam9x60.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clk/at91.h>
/{
model = "Microchip SAM9X60 SoC";
@@ -33,6 +33,12 @@
clock-frequency = <18500>;
};
+ main_rc: main_rc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -53,8 +59,11 @@
sdhci0: sdhci-host@80000000 {
compatible = "microchip,sam9x60-sdhci";
reg = <0x80000000 0x300>;
- clocks = <&sdhci0_clk>, <&sdhci0_gclk>, <&main>;
- clock-names = "hclock", "multclk", "baseclk";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+ assigned-clock-rates = <100000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci0>;
@@ -70,7 +79,7 @@
compatible = "microchip,sam9x60-qspi";
reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
reg-names = "qspi_base", "qspi_mmap";
- clocks = <&qspi_clk>, <&qspick>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
clock-names = "pclk", "qspick";
#address-cells = <1>;
#size-cells = <0>;
@@ -80,7 +89,7 @@
flx0: flexcom@f801c600 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf801c000 0x200>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf801c000 0x800>;
@@ -93,7 +102,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
clock-names = "hclk", "pclk";
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
status = "disabled";
};
@@ -102,7 +111,7 @@
reg = <0xfffff200 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&dbgu_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
clock-names = "usart";
};
@@ -159,7 +168,7 @@
reg = <0xfffff400 0x200>;
#gpio-cells = <2>;
gpio-controller;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
@@ -167,7 +176,7 @@
reg = <0xfffff600 0x200>;
#gpio-cells = <2>;
gpio-controller;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioD: gpio@fffffa00 {
@@ -175,114 +184,22 @@
reg = <0xfffffa00 0x200>;
#gpio-cells = <2>;
gpio-controller;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9x5-pmc";
+ compatible = "microchip,sam9x60-pmc";
reg = <0xfffffc00 0x200>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- };
-
- plla: pllack {
- compatible = "microchip,sam9x60-clk-pll";
- #clock-cells = <0>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <8000000 24000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <140000000 1200000000 0 0>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- clocks = <&clk32 0>, <&main>, <&plla>;
- atmel,clk-output-range = <140000000 200000000>;
- atmel,clk-divisors = <1 2 4 6>;
- };
-
- system: systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- qspick: qspick {
- #clock-cells = <0>;
- reg = <19>;
- clocks = <&mck>;
- };
- };
-
- periph: periphck {
- compatible = "microchip,sam9x60-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- flx0_clk: flx0_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <44>;
- };
-
- sdhci0_clk: sdhci0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- dbgu_clk: dbgu_clk {
- #clock-cells = <0>;
- reg = <47>;
- };
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
-
- qspi_clk: qspi_clk {
- #clock-cells = <0>;
- reg = <35>;
- };
- };
-
- generic: gck {
- compatible = "microchip,sam9x60-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk32 0>, <&clk32 1>, <&main>, <&mck>, <&plla>;
-
- sdhci0_gclk: sdhci0_gclk {
- #clock-cells = <0>;
- reg = <12>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
+ clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
+ status = "okay";
};
pit: timer@fffffe40 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe40 0x10>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */
};
clk32: sckc@fffffe50 {