Patch by Yuli Barcohen, 20 May 2004:
Add support for Interphase iSPAN boards.
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index 8b1103b..2a4f005 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -220,6 +220,77 @@
------------------------------------------------------------
*/
+#ifdef CONFIG_SMC_USE_IOFUNCS
+/*
+ * input and output functions
+ *
+ * Implemented due to inx,outx macros accessing the device improperly
+ * and putting the device into an unkown state.
+ *
+ * For instance, on Sharp LPD7A400 SDK, affects were chip memory
+ * could not be free'd (hence the alloc failures), duplicate packets,
+ * packets being corrupt (shifted) on the wire, etc. Switching to the
+ * inx,outx functions fixed this problem.
+ */
+static inline word SMC_inw(dword offset);
+static inline void SMC_outw(word value, dword offset);
+static inline byte SMC_inb(dword offset);
+static inline void SMC_outb(byte value, dword offset);
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len);
+static inline void SMC_outsw(dword offset, uchar* buf, dword len);
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+static inline word SMC_inw(dword offset)
+{
+ word v;
+ v = *((volatile word*)(SMC_BASE_ADDRESS+offset));
+ barrier(); *(volatile u32*)(0xc0000000);
+ return v;
+}
+
+static inline void SMC_outw(word value, dword offset)
+{
+ *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value;
+ barrier(); *(volatile u32*)(0xc0000000);
+}
+
+static inline byte SMC_inb(dword offset)
+{
+ word _w;
+
+ _w = SMC_inw(offset & ~((dword)1));
+ return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
+}
+
+static inline void SMC_outb(byte value, dword offset)
+{
+ word _w;
+
+ _w = SMC_inw(offset & ~((dword)1));
+ if (offset & 1)
+ *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff);
+ else
+ *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00);
+}
+
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len)
+{
+ while (len-- > 0) {
+ *((word*)buf)++ = SMC_inw(offset);
+ barrier(); *((volatile u32*)(0xc0000000));
+ }
+}
+
+static inline void SMC_outsw(dword offset, uchar* buf, dword len)
+{
+ while (len-- > 0) {
+ SMC_outw(*((word*)buf)++, offset);
+ barrier(); *(volatile u32*)(0xc0000000);
+ }
+}
+#endif /* CONFIG_SMC_USE_IOFUNCS */
+
static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
/*