board/samsung/common/board.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2013 SAMSUNG Electronics
  * Rajeshwari Shinde <rajeshwari.s@samsung.com>
  */

 #include <common.h>
 #include <cros_ec.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <hang.h>
 #include <init.h>
 #include <spi.h>
 #include <tmu.h>
 #include <netdev.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/board.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/dwmmc.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/power.h>
 #include <asm/arch/system.h>
 #include <asm/arch/sromc.h>
 #include <lcd.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <stdio_dev.h>
 #include <usb.h>
 #include <dwc3-uboot.h>
 #include <samsung/misc.h>
 #include <dm/pinctrl.h>
 #include <dm.h>

 DECLARE_GLOBAL_DATA_PTR;

 __weak int exynos_early_init_f(void)
 {
 	return 0;
 }

 __weak int exynos_power_init(void)
 {
 	return 0;
 }

 /**
  * get_boot_mmc_dev() - read boot MMC device id from XOM[7:5] pins.
  */
 static int get_boot_mmc_dev(void)
 {
 	u32 mode = readl(EXYNOS4_OP_MODE) & 0x1C;

 	if (mode == 0x04)
 		return 2; /* MMC2: SD */

 	/* MMC0: eMMC or unknown */
 	return 0;
 }

 #if defined CONFIG_EXYNOS_TMU
 /* Boot Time Thermal Analysis for SoC temperature threshold breach */
 static void boot_temp_check(void)
 {
 	int temp;

 	switch (tmu_monitor(&temp)) {
 	case TMU_STATUS_NORMAL:
 		break;
 	case TMU_STATUS_TRIPPED:
 		/*
 		 * Status TRIPPED ans WARNING means corresponding threshold
 		 * breach
 		 */
 		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
 		set_ps_hold_ctrl();
 		hang();
 		break;
 	case TMU_STATUS_WARNING:
 		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
 		break;
 	case TMU_STATUS_INIT:
 		/*
 		 * TMU_STATUS_INIT means something is wrong with temperature
 		 * sensing and TMU status was changed back from NORMAL to INIT.
 		 */
 		puts("EXYNOS_TMU: WARNING! Temperature sensing not done\n");
 		break;
 	default:
 		debug("EXYNOS_TMU: Unknown TMU state\n");
 	}
 }
 #endif

 int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 #if defined CONFIG_EXYNOS_TMU
 	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
 		debug("%s: Failed to init TMU\n", __func__);
 		return -1;
 	}
 	boot_temp_check();
 #endif
 #ifdef CONFIG_TZSW_RESERVED_DRAM_SIZE
 	/* The last few MB of memory can be reserved for secure firmware */
 	ulong size = CONFIG_TZSW_RESERVED_DRAM_SIZE;

 	gd->ram_size -= size;
 	gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= size;
 #endif
 	return exynos_init();
 }

 int dram_init(void)
 {
 	unsigned int i;
 	unsigned long addr;

 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
 		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
 	}
 	return 0;
 }

 int dram_init_banksize(void)
 {
 	unsigned int i;
 	unsigned long addr, size;

 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
 		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);

 		gd->bd->bi_dram[i].start = addr;
 		gd->bd->bi_dram[i].size = size;
 	}

 	return 0;
 }

 static int board_uart_init(void)
 {
 #ifndef CONFIG_PINCTRL_EXYNOS
 	int err, uart_id, ret = 0;

 	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
 		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
 		if (err) {
 			debug("UART%d not configured\n",
 			      (uart_id - PERIPH_ID_UART0));
 			ret |= err;
 		}
 	}
 	return ret;
 #else
 	return 0;
 #endif
 }

 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
 	int err;
 #ifdef CONFIG_BOARD_TYPES
 	set_board_type();
 #endif
 	err = board_uart_init();
 	if (err) {
 		debug("UART init failed\n");
 		return err;
 	}

 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	board_i2c_init(gd->fdt_blob);
 #endif

 	return exynos_early_init_f();
 }
 #endif

 #if defined(CONFIG_POWER) || defined(CONFIG_DM_PMIC)
 int power_init_board(void)
 {
 	set_ps_hold_ctrl();

 	return exynos_power_init();
 }
 #endif

 #ifdef CONFIG_SMC911X
 static int decode_sromc(const void *blob, struct fdt_sromc *config)
 {
 	int err;
 	int node;

 	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
 	if (node < 0) {
 		debug("Could not find SROMC node\n");
 		return node;
 	}

 	config->bank = fdtdec_get_int(blob, node, "bank", 0);
 	config->width = fdtdec_get_int(blob, node, "width", 2);

 	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
 			FDT_SROM_TIMING_COUNT);
 	if (err < 0) {
 		debug("Could not decode SROMC configuration Error: %s\n",
 		      fdt_strerror(err));
 		return -FDT_ERR_NOTFOUND;
 	}
 	return 0;
 }
 #endif

 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_SMC911X
 	u32 smc_bw_conf, smc_bc_conf;
 	struct fdt_sromc config;
 	fdt_addr_t base_addr;
 	int node;

 	node = decode_sromc(gd->fdt_blob, &config);
 	if (node < 0) {
 		debug("%s: Could not find sromc configuration\n", __func__);
 		return 0;
 	}
 	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
 	if (node < 0) {
 		debug("%s: Could not find lan9215 configuration\n", __func__);
 		return 0;
 	}

 	/* We now have a node, so any problems from now on are errors */
 	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
 	if (base_addr == FDT_ADDR_T_NONE) {
 		debug("%s: Could not find lan9215 address\n", __func__);
 		return -1;
 	}

 	/* Ethernet needs data bus width of 16 bits */
 	if (config.width != 2) {
 		debug("%s: Unsupported bus width %d\n", __func__,
 		      config.width);
 		return -1;
 	}
 	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
 			| SROMC_BYTE_ENABLE(config.bank);

 	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |
 			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
 			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
 			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
 			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |
 			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
 			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);

 	/* Select and configure the SROMC bank */
 	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
 	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
 	return smc911x_initialize(0, base_addr);
 #endif
 	return 0;
 }

 #if defined(CONFIG_DISPLAY_BOARDINFO) || defined(CONFIG_DISPLAY_BOARDINFO_LATE)
 int checkboard(void)
 {
 	if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
 		const char *board_info;

 		if (IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
 			/*
 			 * Printing type requires having revision, although
 			 * this will succeed only if done late.
 			 * Otherwise revision will be set in misc_init_r().
 			 */
 			set_board_revision();
 		}

 		board_info = get_board_type();

 		if (board_info)
 			printf("Type:  %s\n", board_info);
 	}

 	return 0;
 }
 #endif

 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
 	struct udevice *dev;
 	int ret;
 	int mmcbootdev = get_boot_mmc_dev();
 	char mmcbootdev_str[16];

 	stdio_print_current_devices();
 	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
 	if (ret && ret != -ENODEV) {
 		/* Force console on */
 		gd->flags &= ~GD_FLG_SILENT;

 		printf("cros-ec communications failure %d\n", ret);
 		puts("\nPlease reset with Power+Refresh\n\n");
 		panic("Cannot init cros-ec device");
 		return -1;
 	}

 	printf("Boot device: MMC(%u)\n", mmcbootdev);
 	sprintf(mmcbootdev_str, "%u", mmcbootdev);
 	env_set("mmcbootdev", mmcbootdev_str);

 	return 0;
 }
 #endif

 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
 	if (IS_ENABLED(CONFIG_BOARD_TYPES) &&
 	    !IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
 		/*
 		 * If revision was not set by late display boardinfo,
 		 * set it here. At this point regulators should be already
 		 * available.
 		 */
 		set_board_revision();
 	}

 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 	set_board_info();
 #endif
 #ifdef CONFIG_LCD_MENU
 	keys_init();
 	check_boot_mode();
 #endif
 #ifdef CONFIG_CMD_BMP
 	if (panel_info.logo_on)
 		draw_logo();
 #endif
 	return 0;
 }
 #endif

 void reset_misc(void)
 {
 	struct gpio_desc gpio = {};
 	int node;

 	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
 			"samsung,emmc-reset");
 	if (node < 0)
 		return;

 	gpio_request_by_name_nodev(offset_to_ofnode(node), "reset-gpio", 0,
 				   &gpio, GPIOD_IS_OUT);

 	if (dm_gpio_is_valid(&gpio)) {
 		/*
 		 * Reset eMMC
 		 *
 		 * FIXME: Need to optimize delay time. Minimum 1usec pulse is
 		 *	  required by 'JEDEC Standard No.84-A441' (eMMC)
 		 *	  document but real delay time is expected to greater
 		 *	  than 1usec.
 		 */
 		dm_gpio_set_value(&gpio, 0);
 		mdelay(10);
 		dm_gpio_set_value(&gpio, 1);
 	}
 }

 int board_usb_cleanup(int index, enum usb_init_type init)
 {
 #ifdef CONFIG_USB_DWC3
 	dwc3_uboot_exit(index);
 #endif
 	return 0;
 }

 int mmc_get_env_dev(void)
 {
 	return get_boot_mmc_dev();
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2013 SAMSUNG Electronics
	* Rajeshwari Shinde <rajeshwari.s@samsung.com>
	*/

	#include <common.h>
	#include <cros_ec.h>
	#include <errno.h>
	#include <fdtdec.h>
	#include <hang.h>
	#include <init.h>
	#include <spi.h>
	#include <tmu.h>
	#include <netdev.h>
	#include <asm/io.h>
	#include <asm/gpio.h>
	#include <asm/arch/board.h>
	#include <asm/arch/cpu.h>
	#include <asm/arch/dwmmc.h>
	#include <asm/arch/mmc.h>
	#include <asm/arch/pinmux.h>
	#include <asm/arch/power.h>
	#include <asm/arch/system.h>
	#include <asm/arch/sromc.h>
	#include <lcd.h>
	#include <i2c.h>
	#include <mmc.h>
	#include <stdio_dev.h>
	#include <usb.h>
	#include <dwc3-uboot.h>
	#include <samsung/misc.h>
	#include <dm/pinctrl.h>
	#include <dm.h>

	DECLARE_GLOBAL_DATA_PTR;

	__weak int exynos_early_init_f(void)
	{
	return 0;
	}

	__weak int exynos_power_init(void)
	{
	return 0;
	}

	/**
	* get_boot_mmc_dev() - read boot MMC device id from XOM[7:5] pins.
	*/
	static int get_boot_mmc_dev(void)
	{
	u32 mode = readl(EXYNOS4_OP_MODE) & 0x1C;

	if (mode == 0x04)
	return 2; /* MMC2: SD */

	/* MMC0: eMMC or unknown */
	return 0;
	}

	#if defined CONFIG_EXYNOS_TMU
	/* Boot Time Thermal Analysis for SoC temperature threshold breach */
	static void boot_temp_check(void)
	{
	int temp;

	switch (tmu_monitor(&temp)) {
	case TMU_STATUS_NORMAL:
	break;
	case TMU_STATUS_TRIPPED:
	/*
	* Status TRIPPED ans WARNING means corresponding threshold
	* breach
	*/
	puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
	set_ps_hold_ctrl();
	hang();
	break;
	case TMU_STATUS_WARNING:
	puts("EXYNOS_TMU: WARNING! Temperature very high\n");
	break;
	case TMU_STATUS_INIT:
	/*
	* TMU_STATUS_INIT means something is wrong with temperature
	* sensing and TMU status was changed back from NORMAL to INIT.
	*/
	puts("EXYNOS_TMU: WARNING! Temperature sensing not done\n");
	break;
	default:
	debug("EXYNOS_TMU: Unknown TMU state\n");
	}
	}
	#endif

	int board_init(void)
	{
	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
	#if defined CONFIG_EXYNOS_TMU
	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
	debug("%s: Failed to init TMU\n", __func__);
	return -1;
	}
	boot_temp_check();
	#endif
	#ifdef CONFIG_TZSW_RESERVED_DRAM_SIZE
	/* The last few MB of memory can be reserved for secure firmware */
	ulong size = CONFIG_TZSW_RESERVED_DRAM_SIZE;

	gd->ram_size -= size;
	gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= size;
	#endif
	return exynos_init();
	}

	int dram_init(void)
	{
	unsigned int i;
	unsigned long addr;

	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
	addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
	gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
	}
	return 0;
	}

	int dram_init_banksize(void)
	{
	unsigned int i;
	unsigned long addr, size;

	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
	addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
	size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);

	gd->bd->bi_dram[i].start = addr;
	gd->bd->bi_dram[i].size = size;
	}

	return 0;
	}

	static int board_uart_init(void)
	{
	#ifndef CONFIG_PINCTRL_EXYNOS
	int err, uart_id, ret = 0;

	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
	err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
	if (err) {
	debug("UART%d not configured\n",
	(uart_id - PERIPH_ID_UART0));
	ret \|= err;
	}
	}
	return ret;
	#else
	return 0;
	#endif
	}

	#ifdef CONFIG_BOARD_EARLY_INIT_F
	int board_early_init_f(void)
	{
	int err;
	#ifdef CONFIG_BOARD_TYPES
	set_board_type();
	#endif
	err = board_uart_init();
	if (err) {
	debug("UART init failed\n");
	return err;
	}

	#ifdef CONFIG_SYS_I2C_INIT_BOARD
	board_i2c_init(gd->fdt_blob);
	#endif

	return exynos_early_init_f();
	}
	#endif

	#if defined(CONFIG_POWER) \|\| defined(CONFIG_DM_PMIC)
	int power_init_board(void)
	{
	set_ps_hold_ctrl();

	return exynos_power_init();
	}
	#endif

	#ifdef CONFIG_SMC911X
	static int decode_sromc(const void blob, struct fdt_sromc config)
	{
	int err;
	int node;

	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
	if (node < 0) {
	debug("Could not find SROMC node\n");
	return node;
	}

	config->bank = fdtdec_get_int(blob, node, "bank", 0);
	config->width = fdtdec_get_int(blob, node, "width", 2);

	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
	FDT_SROM_TIMING_COUNT);
	if (err < 0) {
	debug("Could not decode SROMC configuration Error: %s\n",
	fdt_strerror(err));
	return -FDT_ERR_NOTFOUND;
	}
	return 0;
	}
	#endif

	int board_eth_init(bd_t *bis)
	{
	#ifdef CONFIG_SMC911X
	u32 smc_bw_conf, smc_bc_conf;
	struct fdt_sromc config;
	fdt_addr_t base_addr;
	int node;

	node = decode_sromc(gd->fdt_blob, &config);
	if (node < 0) {
	debug("%s: Could not find sromc configuration\n", __func__);
	return 0;
	}
	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
	if (node < 0) {
	debug("%s: Could not find lan9215 configuration\n", __func__);
	return 0;
	}

	/* We now have a node, so any problems from now on are errors */
	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
	if (base_addr == FDT_ADDR_T_NONE) {
	debug("%s: Could not find lan9215 address\n", __func__);
	return -1;
	}

	/* Ethernet needs data bus width of 16 bits */
	if (config.width != 2) {
	debug("%s: Unsupported bus width %d\n", __func__,
	config.width);
	return -1;
	}
	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
	\| SROMC_BYTE_ENABLE(config.bank);

	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) \|
	SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) \|
	SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) \|
	SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) \|
	SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) \|
	SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) \|
	SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);

	/* Select and configure the SROMC bank */
	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
	return smc911x_initialize(0, base_addr);
	#endif
	return 0;
	}

	#if defined(CONFIG_DISPLAY_BOARDINFO) \|\| defined(CONFIG_DISPLAY_BOARDINFO_LATE)
	int checkboard(void)
	{
	if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
	const char *board_info;

	if (IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
	/*
	* Printing type requires having revision, although
	* this will succeed only if done late.
	* Otherwise revision will be set in misc_init_r().
	*/
	set_board_revision();
	}

	board_info = get_board_type();

	if (board_info)
	printf("Type: %s\n", board_info);
	}

	return 0;
	}
	#endif

	#ifdef CONFIG_BOARD_LATE_INIT
	int board_late_init(void)
	{
	struct udevice *dev;
	int ret;
	int mmcbootdev = get_boot_mmc_dev();
	char mmcbootdev_str[16];

	stdio_print_current_devices();
	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
	if (ret && ret != -ENODEV) {
	/* Force console on */
	gd->flags &= ~GD_FLG_SILENT;

	printf("cros-ec communications failure %d\n", ret);
	puts("\nPlease reset with Power+Refresh\n\n");
	panic("Cannot init cros-ec device");
	return -1;
	}

	printf("Boot device: MMC(%u)\n", mmcbootdev);
	sprintf(mmcbootdev_str, "%u", mmcbootdev);
	env_set("mmcbootdev", mmcbootdev_str);

	return 0;
	}
	#endif

	#ifdef CONFIG_MISC_INIT_R
	int misc_init_r(void)
	{
	if (IS_ENABLED(CONFIG_BOARD_TYPES) &&
	!IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
	/*
	* If revision was not set by late display boardinfo,
	* set it here. At this point regulators should be already
	* available.
	*/
	set_board_revision();
	}

	#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	set_board_info();
	#endif
	#ifdef CONFIG_LCD_MENU
	keys_init();
	check_boot_mode();
	#endif
	#ifdef CONFIG_CMD_BMP
	if (panel_info.logo_on)
	draw_logo();
	#endif
	return 0;
	}
	#endif

	void reset_misc(void)
	{
	struct gpio_desc gpio = {};
	int node;

	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
	"samsung,emmc-reset");
	if (node < 0)
	return;

	gpio_request_by_name_nodev(offset_to_ofnode(node), "reset-gpio", 0,
	&gpio, GPIOD_IS_OUT);

	if (dm_gpio_is_valid(&gpio)) {
	/*
	* Reset eMMC
	*
	* FIXME: Need to optimize delay time. Minimum 1usec pulse is
	* required by 'JEDEC Standard No.84-A441' (eMMC)
	* document but real delay time is expected to greater
	* than 1usec.
	*/
	dm_gpio_set_value(&gpio, 0);
	mdelay(10);
	dm_gpio_set_value(&gpio, 1);
	}
	}

	int board_usb_cleanup(int index, enum usb_init_type init)
	{
	#ifdef CONFIG_USB_DWC3
	dwc3_uboot_exit(index);
	#endif
	return 0;
	}

	int mmc_get_env_dev(void)
	{
	return get_boot_mmc_dev();
	}