ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Since DRA7xx/AM57xx SR1.1 and SR1.0 has errata to limit the frequency of
MMC1 to 96MHz and frequency of MMC2 to 48MHz for AM572x SR1.1, limit the
frequency and disable higher speed modes for those revision.
Also use the recommended IO delays (those tagged with "rev11")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index c3f60f6..5bd8778 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -30,6 +30,7 @@
#include <dwc3-uboot.h>
#include <dwc3-omap-uboot.h>
#include <ti-usb-phy-uboot.h>
+#include <mmc.h>
#include "../common/board_detect.h"
#include "mux_data.h"
@@ -815,6 +816,35 @@
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
+
+static const struct mmc_platform_fixups am57x_es1_1_mmc1_fixups = {
+ .hw_rev = "rev11",
+ .unsupported_caps = MMC_CAP(MMC_HS_200) |
+ MMC_CAP(UHS_SDR104),
+ .max_freq = 96000000,
+};
+
+static const struct mmc_platform_fixups am57x_es1_1_mmc23_fixups = {
+ .hw_rev = "rev11",
+ .unsupported_caps = MMC_CAP(MMC_HS_200) |
+ MMC_CAP(UHS_SDR104) |
+ MMC_CAP(UHS_SDR50),
+ .max_freq = 48000000,
+};
+
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
+{
+ switch (omap_revision()) {
+ case DRA752_ES1_0:
+ case DRA752_ES1_1:
+ if (addr == OMAP_HSMMC1_BASE)
+ return &am57x_es1_1_mmc1_fixups;
+ else
+ return &am57x_es1_1_mmc23_fixups;
+ default:
+ return NULL;
+ }
+}
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)