MX51EVK: Use SWx macros in PMIC init
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 7c50c54..02a765d 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -198,17 +198,17 @@
/* Set core voltage to 1.1V */
val = pmic_reg_read(REG_SW_0);
- val = (val & (~0x1F)) | 0x14;
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
pmic_reg_write(REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
val = pmic_reg_read(REG_SW_1);
- val = (val & (~0x1F)) | 0x1A;
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
val = pmic_reg_read(REG_SW_2);
- val = (val & (~0x1F)) | 0x1A;
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(REG_SW_2, val);
udelay(50);