Initial revision
diff --git a/include/configs/trab.h b/include/configs/trab.h
new file mode 100644
index 0000000..7096767
--- /dev/null
+++ b/include/configs/trab.h
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn <gj@denx.de>
+ *
+ * Configuation settings for the TRAB board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
+#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
+#define CONFIG_TRAB 1 /* on a TRAB Board */
+#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
+
+/* input clock of PLL */
+#define CONFIG_PLL_INPUT_FREQ 12000000 /* TRAB has 12 MHz input clock */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
+#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+
+#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
+#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
+
+#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
+
+#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
+
+#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */
+
+/*
+ * The following enables modem debugging stuff. The dbg() and
+ * 'char screen[1024]' are used for debug printfs. Unfortunately,
+ * it is usable only from BDI
+ */
+#undef CONFIG_MODEM_SUPPORT_DEBUG
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+#ifdef CONFIG_HWFLOW
+#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW
+#else
+#define CONFIG_COMMANDS_ADD_HWFLOW 0
+#endif
+
+#ifdef CONFIG_VFD
+#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD
+#else
+#define CONFIG_COMMANDS_ADD_VFD 0
+#endif
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
+ CFG_CMD_BSP | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD )
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_BSP | \
+ CONFIG_COMMANDS_ADD_HWFLOW | \
+ CONFIG_COMMANDS_ADD_VFD )
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
+#define CONFIG_BOOTARGS "console=ttyS0"
+#define CONFIG_ETHADDR 00:D0:93:00:61:11
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.3.27
+#define CONFIG_SERVERIP 192.168.3.1
+#define CONFIG_BOOTCOMMAND "run flash_nfs"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nfs_args=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "rootpath=/opt/eldk/arm_920TDI\0" \
+ "ram_args=setenv bootargs root=/dev/ram rw\0" \
+ "add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
+ "add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \
+ "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
+ "update=protect off 1:0-7;era 1:0-7;cp.b 0xc100000 0 $(filesize);" \
+ "setenv filesize;saveenv\0" \
+ "loadfile=/tftpboot/TRAB/pImage\0" \
+ "loadaddr=c400000\0" \
+ "net_load=tftpboot $(loadaddr) $(loadfile)\0" \
+ "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
+ "kernel_addr=00040000\0" \
+ "flash_nfs=run nfs_args add_net add_misc;bootm $(kernel_addr)\0" \
+ "mdm_init1=ATZ\0" \
+ "mdm_init2=ATS0=1\0" \
+ "mdm_flow_control=rts/cts\0"
+
+#if 0 /* disabled for development */
+#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "system" /* 1st password */
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0c000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0d000000 /* 16 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x0cf00000 /* default load address */
+
+#ifdef CONFIG_TRAB_50MHZ
+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* it to wrap 100 times (total 1562500) to get 1 sec. */
+/* this should _really_ be calculated !! */
+#define CFG_HZ 1562500
+#else
+/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
+/* it to wrap 100 times (total 1039000) to get 1 sec. */
+/* this should _really_ be calculated !! */
+#define CFG_HZ 1039000
+#endif
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
+
+/* The following #defines are needed to get flash environment right */
+#define CFG_MONITOR_BASE PHYS_FLASH_1
+#define CFG_MONITOR_LEN (256 << 10)
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (71) /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
+#define CFG_ENV_SIZE 0x4000
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+#endif /* __CONFIG_H */