stm32mp1: update device tree with ETZPC status
U-Boot should disable nodes in device tree if needed according
ETZPC status in ft_system_setup().
ETZPC itself use an array on addresses to do the match between the status
bits and the node.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index c635353..82c430b 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -7,6 +7,178 @@
#include <fdt_support.h>
#include <asm/arch/sys_proto.h>
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <linux/io.h>
+
+#define ETZPC_DECPROT(n) (STM32_ETZPC_BASE + 0x10 + 4 * (n))
+#define ETZPC_DECPROT_NB 6
+
+#define DECPROT_MASK 0x03
+#define NB_PROT_PER_REG 0x10
+#define DECPROT_NB_BITS 2
+
+#define DECPROT_SECURED 0x00
+#define DECPROT_WRITE_SECURE 0x01
+#define DECPROT_MCU_ISOLATION 0x02
+#define DECPROT_NON_SECURED 0x03
+
+#define ETZPC_RESERVED 0xffffffff
+
+static const u32 stm32mp1_ip_addr[] = {
+ 0x5c008000, /* 00 stgenc */
+ 0x54000000, /* 01 bkpsram */
+ 0x5c003000, /* 02 iwdg1 */
+ 0x5c000000, /* 03 usart1 */
+ 0x5c001000, /* 04 spi6 */
+ 0x5c002000, /* 05 i2c4 */
+ ETZPC_RESERVED, /* 06 reserved */
+ 0x54003000, /* 07 rng1 */
+ 0x54002000, /* 08 hash1 */
+ 0x54001000, /* 09 cryp1 */
+ 0x5a003000, /* 0A ddrctrl */
+ 0x5a004000, /* 0B ddrphyc */
+ 0x5c009000, /* 0C i2c6 */
+ ETZPC_RESERVED, /* 0D reserved */
+ ETZPC_RESERVED, /* 0E reserved */
+ ETZPC_RESERVED, /* 0F reserved */
+ 0x40000000, /* 10 tim2 */
+ 0x40001000, /* 11 tim3 */
+ 0x40002000, /* 12 tim4 */
+ 0x40003000, /* 13 tim5 */
+ 0x40004000, /* 14 tim6 */
+ 0x40005000, /* 15 tim7 */
+ 0x40006000, /* 16 tim12 */
+ 0x40007000, /* 17 tim13 */
+ 0x40008000, /* 18 tim14 */
+ 0x40009000, /* 19 lptim1 */
+ 0x4000a000, /* 1A wwdg1 */
+ 0x4000b000, /* 1B spi2 */
+ 0x4000c000, /* 1C spi3 */
+ 0x4000d000, /* 1D spdifrx */
+ 0x4000e000, /* 1E usart2 */
+ 0x4000f000, /* 1F usart3 */
+ 0x40010000, /* 20 uart4 */
+ 0x40011000, /* 21 uart5 */
+ 0x40012000, /* 22 i2c1 */
+ 0x40013000, /* 23 i2c2 */
+ 0x40014000, /* 24 i2c3 */
+ 0x40015000, /* 25 i2c5 */
+ 0x40016000, /* 26 cec */
+ 0x40017000, /* 27 dac */
+ 0x40018000, /* 28 uart7 */
+ 0x40019000, /* 29 uart8 */
+ ETZPC_RESERVED, /* 2A reserved */
+ ETZPC_RESERVED, /* 2B reserved */
+ 0x4001c000, /* 2C mdios */
+ ETZPC_RESERVED, /* 2D reserved */
+ ETZPC_RESERVED, /* 2E reserved */
+ ETZPC_RESERVED, /* 2F reserved */
+ 0x44000000, /* 30 tim1 */
+ 0x44001000, /* 31 tim8 */
+ ETZPC_RESERVED, /* 32 reserved */
+ 0x44003000, /* 33 usart6 */
+ 0x44004000, /* 34 spi1 */
+ 0x44005000, /* 35 spi4 */
+ 0x44006000, /* 36 tim15 */
+ 0x44007000, /* 37 tim16 */
+ 0x44008000, /* 38 tim17 */
+ 0x44009000, /* 39 spi5 */
+ 0x4400a000, /* 3A sai1 */
+ 0x4400b000, /* 3B sai2 */
+ 0x4400c000, /* 3C sai3 */
+ 0x4400d000, /* 3D dfsdm */
+ 0x4400e000, /* 3E tt_fdcan */
+ ETZPC_RESERVED, /* 3F reserved */
+ 0x50021000, /* 40 lptim2 */
+ 0x50022000, /* 41 lptim3 */
+ 0x50023000, /* 42 lptim4 */
+ 0x50024000, /* 43 lptim5 */
+ 0x50027000, /* 44 sai4 */
+ 0x50025000, /* 45 vrefbuf */
+ 0x4c006000, /* 46 dcmi */
+ 0x4c004000, /* 47 crc2 */
+ 0x48003000, /* 48 adc */
+ 0x4c002000, /* 49 hash2 */
+ 0x4c003000, /* 4A rng2 */
+ 0x4c005000, /* 4B cryp2 */
+ ETZPC_RESERVED, /* 4C reserved */
+ ETZPC_RESERVED, /* 4D reserved */
+ ETZPC_RESERVED, /* 4E reserved */
+ ETZPC_RESERVED, /* 4F reserved */
+ ETZPC_RESERVED, /* 50 sram1 */
+ ETZPC_RESERVED, /* 51 sram2 */
+ ETZPC_RESERVED, /* 52 sram3 */
+ ETZPC_RESERVED, /* 53 sram4 */
+ ETZPC_RESERVED, /* 54 retram */
+ 0x49000000, /* 55 otg */
+ 0x48004000, /* 56 sdmmc3 */
+ 0x48005000, /* 57 dlybsd3 */
+ 0x48000000, /* 58 dma1 */
+ 0x48001000, /* 59 dma2 */
+ 0x48002000, /* 5A dmamux */
+ 0x58002000, /* 5B fmc */
+ 0x58003000, /* 5C qspi */
+ 0x58004000, /* 5D dlybq */
+ 0x5800a000, /* 5E eth */
+ ETZPC_RESERVED, /* 5F reserved */
+};
+
+/* fdt helper */
+static bool fdt_disable_subnode_by_address(void *fdt, int offset, u32 addr)
+{
+ int node;
+
+ for (node = fdt_first_subnode(fdt, offset);
+ node >= 0;
+ node = fdt_next_subnode(fdt, node)) {
+ if (addr == (u32)fdt_getprop(fdt, node, "reg", 0)) {
+ if (fdtdec_get_is_enabled(fdt, node)) {
+ fdt_status_disabled(fdt, node);
+
+ return true;
+ }
+ return false;
+ }
+ }
+
+ return false;
+}
+
+static int stm32_fdt_fixup_etzpc(void *fdt)
+{
+ const u32 *array;
+ int array_size, i;
+ int soc_node, offset, shift;
+ u32 addr, status, decprot[ETZPC_DECPROT_NB];
+
+ array = stm32mp1_ip_addr;
+ array_size = ARRAY_SIZE(stm32mp1_ip_addr);
+
+ for (i = 0; i < ETZPC_DECPROT_NB; i++)
+ decprot[i] = readl(ETZPC_DECPROT(i));
+
+ soc_node = fdt_path_offset(fdt, "/soc");
+ if (soc_node < 0)
+ return soc_node;
+
+ for (i = 0; i < array_size; i++) {
+ offset = i / NB_PROT_PER_REG;
+ shift = (i % NB_PROT_PER_REG) * DECPROT_NB_BITS;
+ status = (decprot[offset] >> shift) & DECPROT_MASK;
+ addr = array[i];
+
+ debug("ETZPC: 0x%08x decprot %d=%d\n", addr, i, status);
+
+ if (addr == ETZPC_RESERVED ||
+ status == DECPROT_NON_SECURED)
+ continue;
+
+ if (fdt_disable_subnode_by_address(fdt, soc_node, addr))
+ printf("ETZPC: 0x%08x node disabled, decprot %d=%d\n",
+ addr, i, status);
+ }
+
+ return 0;
+}
/*
* This function is called right before the kernel is booted. "blob" is the
@@ -17,6 +189,12 @@
int ret = 0;
u32 pkg;
+ if (CONFIG_IS_ENABLED(STM32_ETZPC)) {
+ ret = stm32_fdt_fixup_etzpc(blob);
+ if (ret)
+ return ret;
+ }
+
switch (get_cpu_package()) {
case PKG_AA_LBGA448:
pkg = STM32MP_PKG_AA;