clk: sunxi: Add support for I2C gates/resets
Currently, the I2C clocks are configured in the sunxi board code. Add
the I2C clocks to the DM clock driver so they can be enabled from the
DM I2C driver using the normal uclass methods.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
index 34ccda7..cce5c65 100644
--- a/drivers/clk/sunxi/clk_v3s.c
+++ b/drivers/clk/sunxi/clk_v3s.c
@@ -20,6 +20,8 @@
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
[CLK_BUS_OTG] = GATE(0x060, BIT(24)),
+ [CLK_BUS_I2C0] = GATE(0x06c, BIT(0)),
+ [CLK_BUS_I2C1] = GATE(0x06c, BIT(1)),
[CLK_BUS_UART0] = GATE(0x06c, BIT(16)),
[CLK_BUS_UART1] = GATE(0x06c, BIT(17)),
[CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
@@ -38,6 +40,8 @@
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
[RST_BUS_OTG] = RESET(0x2c0, BIT(24)),
+ [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)),
+ [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)),
[RST_BUS_UART0] = RESET(0x2d8, BIT(16)),
[RST_BUS_UART1] = RESET(0x2d8, BIT(17)),
[RST_BUS_UART2] = RESET(0x2d8, BIT(18)),