omap3_logic: Rework MACH_TYPE and fdtfile logic
The MACH_TYPE values for the omap37xx based platforms are no longer
officially valid, so we must not set and pass them. In order to not
reference them but still be able to set the default fdtfile based on the
board detection logic we need to combine the two steps into one.
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Adam Ford <aford173@gmail.com>
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index de6a060..21b3fdc 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -60,25 +60,28 @@
static struct board_id {
char *name;
int machine_id;
+ char *fdtfile;
} boards[2][2] = {
{
{
.name = "OMAP35xx SOM LV",
.machine_id = MACH_TYPE_OMAP3530_LV_SOM,
+ .fdtfile = "logicpd-som-lv-35xx-devkit.dtb",
},
{
.name = "OMAP35xx Torpedo",
.machine_id = MACH_TYPE_OMAP3_TORPEDO,
+ .fdtfile = "logicpd-torpedo-35xx-devkit.dtb",
},
},
{
{
.name = "DM37xx SOM LV",
- .machine_id = MACH_TYPE_DM3730_SOM_LV,
+ .fdtfile = "logicpd-som-lv-37xx-devkit.dtb",
},
{
.name = "DM37xx Torpedo",
- .machine_id = MACH_TYPE_DM3730_TORPEDO,
+ .fdtfile = "logicpd-torpedo-37xx-devkit.dtb",
},
},
};
@@ -165,14 +168,20 @@
*/
int board_init(void)
{
- struct board_id *board;
- unsigned int val;
-
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ struct board_id *board;
+ unsigned int val;
+
/*
* To identify between a SOM LV and Torpedo module,
* a pulldown resistor is on hsusb0_data5 for the SOM LV module.
@@ -207,39 +216,16 @@
printf("Board: %s\n", board->name);
/* Set the machine_id passed to Linux */
- gd->bd->bi_arch_number = board->machine_id;
+ if (board->machine_id)
+ gd->bd->bi_arch_number = board->machine_id;
+
+ /* If the user has not set fdtimage, set the default */
+ if (!getenv("fdtimage"))
+ setenv("fdtimage", board->fdtfile);
}
/* restore hsusb0_data5 pin as hsusb0_data5 */
MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
-
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- /* If we do not have an fdtimage, let's autodetect it*/
- if (getenv("fdtimage"))
- return 0;
-
- switch (gd->bd->bi_arch_number) {
- case MACH_TYPE_DM3730_TORPEDO:
- setenv("fdtimage", "logicpd-torpedo-37xx-devkit.dtb");
- break;
- case MACH_TYPE_DM3730_SOM_LV:
- setenv("fdtimage", "logicpd-som-lv-37xx-devkit.dtb");
- break;
- case MACH_TYPE_OMAP3_TORPEDO:
- setenv("fdtimage", "logicpd-torpedo-35xx-devkit.dtb");
- break;
- case MACH_TYPE_OMAP3530_LV_SOM:
- setenv("fdtimage", "logicpd-som-lv-35xx-devkit.dtb");
- break;
- default:
- /* unknown machine type */
- break;
- }
return 0;
}
#endif