arm: Remove vexpress_ca15_tc2 board

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index 79a0562..d176e04 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -195,12 +195,6 @@
         evb_ast2500:
           TEST_PY_BD: "evb-ast2500"
           TEST_PY_ID: "--id qemu"
-        vexpress_ca15_tc2:
-          TEST_PY_BD: "vexpress_ca15_tc2"
-          TEST_PY_ID: "--id qemu"
-        vexpress_ca9x4:
-          TEST_PY_BD: "vexpress_ca9x4"
-          TEST_PY_ID: "--id qemu"
         integratorcp_cm926ejs:
           TEST_PY_BD: "integratorcp_cm926ejs"
           TEST_PY_ID: "--id qemu"
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 28f72ab..51bd643 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -206,18 +206,6 @@
     TEST_PY_BD: "sandbox_flattree"
   <<: *buildman_and_testpy_dfn
 
-vexpress_ca15_tc2 test.py:
-  variables:
-    TEST_PY_BD: "vexpress_ca15_tc2"
-    TEST_PY_ID: "--id qemu"
-  <<: *buildman_and_testpy_dfn
-
-vexpress_ca9x4 test.py:
-  variables:
-    TEST_PY_BD: "vexpress_ca9x4"
-    TEST_PY_ID: "--id qemu"
-  <<: *buildman_and_testpy_dfn
-
 integratorcp_cm926ejs test.py:
   variables:
     TEST_PY_BD: "integratorcp_cm926ejs"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 25f4362..962331c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -645,13 +645,6 @@
 	select OF_CONTROL
 	imply CMD_DM
 
-config TARGET_VEXPRESS_CA15_TC2
-	bool "Support vexpress_ca15_tc2"
-	select CPU_V7A
-	select CPU_V7_HAS_NONSEC
-	select CPU_V7_HAS_VIRT
-	select PL011_SERIAL
-
 config ARCH_BCMSTB
 	bool "Broadcom BCM7XXX family"
 	select CPU_V7A
@@ -663,16 +656,6 @@
 	  This enables support for Broadcom ARM-based set-top box
 	  chipsets, including the 7445 family of chips.
 
-config TARGET_VEXPRESS_CA5X2
-	bool "Support vexpress_ca5x2"
-	select CPU_V7A
-	select PL011_SERIAL
-
-config TARGET_VEXPRESS_CA9X4
-	bool "Support vexpress_ca9x4"
-	select CPU_V7A
-	select PL011_SERIAL
-
 config TARGET_BCM23550_W1D
 	bool "Support bcm23550_w1d"
 	select CPU_V7A
@@ -1964,7 +1947,6 @@
 source "board/Marvell/gplugd/Kconfig"
 source "board/Marvell/octeontx/Kconfig"
 source "board/Marvell/octeontx2/Kconfig"
-source "board/armltd/vexpress/Kconfig"
 source "board/armltd/vexpress64/Kconfig"
 source "board/cortina/presidio-asic/Kconfig"
 source "board/broadcom/bcm23550_w1d/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c09ce8f..d290c44 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1071,10 +1071,6 @@
 dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 
-dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
-dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
-dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
-
 dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
 
 dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
diff --git a/arch/arm/dts/vexpress-v2m-rs1.dtsi b/arch/arm/dts/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index d3963e9..0000000
--- a/arch/arm/dts/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-
-/ {
-	smb@8000000 {
-		motherboard {
-			model = "V2M-P1";
-			arm,hbi = <0x190>;
-			arm,vexpress,site = <0>;
-			arm,v2m-memory-map = "rs1";
-			compatible = "arm,vexpress,v2m-p1", "simple-bus";
-			#address-cells = <2>; /* SMB chipselect number and offset */
-			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
-
-			flash@0,00000000 {
-				compatible = "arm,vexpress-flash", "cfi-flash";
-				reg = <0 0x00000000 0x04000000>,
-				      <4 0x00000000 0x04000000>;
-				bank-width = <4>;
-			};
-
-			psram@1,00000000 {
-				compatible = "arm,vexpress-psram", "mtd-ram";
-				reg = <1 0x00000000 0x02000000>;
-				bank-width = <4>;
-			};
-
-			ethernet@2,02000000 {
-				compatible = "smsc,lan9118", "smsc,lan9115";
-				reg = <2 0x02000000 0x10000>;
-				interrupts = <15>;
-				phy-mode = "mii";
-				reg-io-width = <4>;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-				vdd33a-supply = <&v2m_fixed_3v3>;
-				vddvario-supply = <&v2m_fixed_3v3>;
-			};
-
-			usb@2,03000000 {
-				compatible = "nxp,usb-isp1761";
-				reg = <2 0x03000000 0x20000>;
-				interrupts = <16>;
-				port1-otg;
-			};
-
-			iofpga@3,00000000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 3 0 0x200000>;
-
-				v2m_sysreg: sysreg@10000 {
-					compatible = "arm,vexpress-sysreg";
-					reg = <0x010000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x10000 0x1000>;
-
-					v2m_led_gpios: gpio@8 {
-						compatible = "arm,vexpress-sysreg,sys_led";
-						reg = <0x008 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_mmc_gpios: gpio@48 {
-						compatible = "arm,vexpress-sysreg,sys_mci";
-						reg = <0x048 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_flash_gpios: gpio@4c {
-						compatible = "arm,vexpress-sysreg,sys_flash";
-						reg = <0x04c 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-				};
-
-				v2m_sysctl: sysctl@20000 {
-					compatible = "arm,sp810", "arm,primecell";
-					reg = <0x020000 0x1000>;
-					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-					clock-names = "refclk", "timclk", "apb_pclk";
-					#clock-cells = <1>;
-					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-				};
-
-				/* PCI-E I2C bus */
-				v2m_i2c_pcie: i2c@30000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x030000 0x1000>;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pcie-switch@60 {
-						compatible = "idt,89hpes32h8";
-						reg = <0x60>;
-					};
-				};
-
-				aaci@40000 {
-					compatible = "arm,pl041", "arm,primecell";
-					reg = <0x040000 0x1000>;
-					interrupts = <11>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				mmci@50000 {
-					compatible = "arm,pl180", "arm,primecell";
-					reg = <0x050000 0x1000>;
-					interrupts = <9>, <10>;
-					cd-gpios = <&v2m_mmc_gpios 0 0>;
-					wp-gpios = <&v2m_mmc_gpios 1 0>;
-					max-frequency = <12000000>;
-					vmmc-supply = <&v2m_fixed_3v3>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "mclk", "apb_pclk";
-				};
-
-				kmi@60000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x060000 0x1000>;
-					interrupts = <12>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				kmi@70000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x070000 0x1000>;
-					interrupts = <13>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				v2m_serial0: uart@90000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x090000 0x1000>;
-					interrupts = <5>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial1: uart@a0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0a0000 0x1000>;
-					interrupts = <6>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial2: uart@b0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0b0000 0x1000>;
-					interrupts = <7>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial3: uart@c0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0c0000 0x1000>;
-					interrupts = <8>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				wdt@f0000 {
-					compatible = "arm,sp805", "arm,primecell";
-					reg = <0x0f0000 0x1000>;
-					interrupts = <0>;
-					clocks = <&v2m_refclk32khz>, <&smbclk>;
-					clock-names = "wdogclk", "apb_pclk";
-				};
-
-				v2m_timer01: timer@110000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x110000 0x1000>;
-					interrupts = <2>;
-					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				v2m_timer23: timer@120000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x120000 0x1000>;
-					interrupts = <3>;
-					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				/* DVI I2C bus */
-				v2m_i2c_dvi: i2c@160000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x160000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					dvi-transmitter@39 {
-						compatible = "sil,sii9022-tpi", "sil,sii9022";
-						reg = <0x39>;
-
-						ports {
-							#address-cells = <1>;
-							#size-cells = <0>;
-
-							port@0 {
-								reg = <0>;
-								dvi_bridge_in: endpoint {
-									remote-endpoint = <&clcd_pads>;
-								};
-							};
-						};
-					};
-
-					dvi-transmitter@60 {
-						compatible = "sil,sii9022-cpi", "sil,sii9022";
-						reg = <0x60>;
-					};
-				};
-
-				rtc@170000 {
-					compatible = "arm,pl031", "arm,primecell";
-					reg = <0x170000 0x1000>;
-					interrupts = <4>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				compact-flash@1a0000 {
-					compatible = "arm,vexpress-cf", "ata-generic";
-					reg = <0x1a0000 0x100
-					       0x1a0100 0xf00>;
-					reg-shift = <2>;
-				};
-
-				clcd@1f0000 {
-					compatible = "arm,pl111", "arm,primecell";
-					reg = <0x1f0000 0x1000>;
-					interrupt-names = "combined";
-					interrupts = <14>;
-					clocks = <&v2m_oscclk1>, <&smbclk>;
-					clock-names = "clcdclk", "apb_pclk";
-					/* 800x600 16bpp @36MHz works fine */
-					max-memory-bandwidth = <54000000>;
-					memory-region = <&vram>;
-
-					port {
-						clcd_pads: endpoint {
-							remote-endpoint = <&dvi_bridge_in>;
-							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-						};
-					};
-				};
-			};
-
-			v2m_fixed_3v3: fixed-regulator-0 {
-				compatible = "regulator-fixed";
-				regulator-name = "3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			v2m_clk24mhz: clk24mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <24000000>;
-				clock-output-names = "v2m:clk24mhz";
-			};
-
-			v2m_refclk1mhz: refclk1mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <1000000>;
-				clock-output-names = "v2m:refclk1mhz";
-			};
-
-			v2m_refclk32khz: refclk32khz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <32768>;
-				clock-output-names = "v2m:refclk32khz";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				user1 {
-					label = "v2m:green:user1";
-					gpios = <&v2m_led_gpios 0 0>;
-					linux,default-trigger = "heartbeat";
-				};
-
-				user2 {
-					label = "v2m:green:user2";
-					gpios = <&v2m_led_gpios 1 0>;
-					linux,default-trigger = "mmc0";
-				};
-
-				user3 {
-					label = "v2m:green:user3";
-					gpios = <&v2m_led_gpios 2 0>;
-					linux,default-trigger = "cpu0";
-				};
-
-				user4 {
-					label = "v2m:green:user4";
-					gpios = <&v2m_led_gpios 3 0>;
-					linux,default-trigger = "cpu1";
-				};
-
-				user5 {
-					label = "v2m:green:user5";
-					gpios = <&v2m_led_gpios 4 0>;
-					linux,default-trigger = "cpu2";
-				};
-
-				user6 {
-					label = "v2m:green:user6";
-					gpios = <&v2m_led_gpios 5 0>;
-					linux,default-trigger = "cpu3";
-				};
-
-				user7 {
-					label = "v2m:green:user7";
-					gpios = <&v2m_led_gpios 6 0>;
-					linux,default-trigger = "cpu4";
-				};
-
-				user8 {
-					label = "v2m:green:user8";
-					gpios = <&v2m_led_gpios 7 0>;
-					linux,default-trigger = "cpu5";
-				};
-			};
-
-			mcc {
-				compatible = "arm,vexpress,config-bus";
-				arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-				oscclk0 {
-					/* MCC static memory clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 0>;
-					freq-range = <25000000 60000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk0";
-				};
-
-				v2m_oscclk1: oscclk1 {
-					/* CLCD clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 1>;
-					freq-range = <23750000 65000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk1";
-				};
-
-				v2m_oscclk2: oscclk2 {
-					/* IO FPGA peripheral clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 2>;
-					freq-range = <24000000 24000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk2";
-				};
-
-				volt-vio {
-					/* Logic level voltage */
-					compatible = "arm,vexpress-volt";
-					arm,vexpress-sysreg,func = <2 0>;
-					regulator-name = "VIO";
-					regulator-always-on;
-					label = "VIO";
-				};
-
-				temp-mcc {
-					/* MCC internal operating temperature */
-					compatible = "arm,vexpress-temp";
-					arm,vexpress-sysreg,func = <4 0>;
-					label = "MCC";
-				};
-
-				reset {
-					compatible = "arm,vexpress-reset";
-					arm,vexpress-sysreg,func = <5 0>;
-				};
-
-				muxfpga {
-					compatible = "arm,vexpress-muxfpga";
-					arm,vexpress-sysreg,func = <7 0>;
-				};
-
-				shutdown {
-					compatible = "arm,vexpress-shutdown";
-					arm,vexpress-sysreg,func = <8 0>;
-				};
-
-				reboot {
-					compatible = "arm,vexpress-reboot";
-					arm,vexpress-sysreg,func = <9 0>;
-				};
-
-				dvimode {
-					compatible = "arm,vexpress-dvimode";
-					arm,vexpress-sysreg,func = <11 0>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/vexpress-v2m.dtsi b/arch/arm/dts/vexpress-v2m.dtsi
deleted file mode 100644
index 798c97a..0000000
--- a/arch/arm/dts/vexpress-v2m.dtsi
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * Original memory map ("Legacy memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m-rs1.dtsi!
- */
-
-/ {
-	smb@4000000 {
-		motherboard {
-			model = "V2M-P1";
-			arm,hbi = <0x190>;
-			arm,vexpress,site = <0>;
-			compatible = "arm,vexpress,v2m-p1", "simple-bus";
-			#address-cells = <2>; /* SMB chipselect number and offset */
-			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
-
-			flash@0,00000000 {
-				compatible = "arm,vexpress-flash", "cfi-flash";
-				reg = <0 0x00000000 0x04000000>,
-				      <1 0x00000000 0x04000000>;
-				bank-width = <4>;
-			};
-
-			psram@2,00000000 {
-				compatible = "arm,vexpress-psram", "mtd-ram";
-				reg = <2 0x00000000 0x02000000>;
-				bank-width = <4>;
-			};
-
-			ethernet@3,02000000 {
-				compatible = "smsc,lan9118", "smsc,lan9115";
-				reg = <3 0x02000000 0x10000>;
-				interrupts = <15>;
-				phy-mode = "mii";
-				reg-io-width = <4>;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-				vdd33a-supply = <&v2m_fixed_3v3>;
-				vddvario-supply = <&v2m_fixed_3v3>;
-			};
-
-			usb@3,03000000 {
-				compatible = "nxp,usb-isp1761";
-				reg = <3 0x03000000 0x20000>;
-				interrupts = <16>;
-				port1-otg;
-			};
-
-			iofpga@7,00000000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 7 0 0x20000>;
-
-				v2m_sysreg: sysreg@0 {
-					compatible = "arm,vexpress-sysreg";
-					reg = <0x00000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x1000>;
-
-					v2m_led_gpios: gpio@8 {
-						compatible = "arm,vexpress-sysreg,sys_led";
-						reg = <0x008 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_mmc_gpios: gpio@48 {
-						compatible = "arm,vexpress-sysreg,sys_mci";
-						reg = <0x048 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_flash_gpios: gpio@4c {
-						compatible = "arm,vexpress-sysreg,sys_flash";
-						reg = <0x04c 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-				};
-
-				v2m_sysctl: sysctl@1000 {
-					compatible = "arm,sp810", "arm,primecell";
-					reg = <0x01000 0x1000>;
-					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-					clock-names = "refclk", "timclk", "apb_pclk";
-					#clock-cells = <1>;
-					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-				};
-
-				/* PCI-E I2C bus */
-				v2m_i2c_pcie: i2c@2000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x02000 0x1000>;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pcie-switch@60 {
-						compatible = "idt,89hpes32h8";
-						reg = <0x60>;
-					};
-				};
-
-				aaci@4000 {
-					compatible = "arm,pl041", "arm,primecell";
-					reg = <0x04000 0x1000>;
-					interrupts = <11>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				mmci@5000 {
-					compatible = "arm,pl180", "arm,primecell";
-					reg = <0x05000 0x1000>;
-					interrupts = <9>, <10>;
-					cd-gpios = <&v2m_mmc_gpios 0 0>;
-					wp-gpios = <&v2m_mmc_gpios 1 0>;
-					max-frequency = <12000000>;
-					vmmc-supply = <&v2m_fixed_3v3>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "mclk", "apb_pclk";
-				};
-
-				kmi@6000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x06000 0x1000>;
-					interrupts = <12>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				kmi@7000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x07000 0x1000>;
-					interrupts = <13>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				v2m_serial0: uart@9000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x09000 0x1000>;
-					interrupts = <5>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial1: uart@a000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0a000 0x1000>;
-					interrupts = <6>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial2: uart@b000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0b000 0x1000>;
-					interrupts = <7>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial3: uart@c000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0c000 0x1000>;
-					interrupts = <8>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				wdt@f000 {
-					compatible = "arm,sp805", "arm,primecell";
-					reg = <0x0f000 0x1000>;
-					interrupts = <0>;
-					clocks = <&v2m_refclk32khz>, <&smbclk>;
-					clock-names = "wdogclk", "apb_pclk";
-				};
-
-				v2m_timer01: timer@11000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x11000 0x1000>;
-					interrupts = <2>;
-					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				v2m_timer23: timer@12000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x12000 0x1000>;
-					interrupts = <3>;
-					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				/* DVI I2C bus */
-				v2m_i2c_dvi: i2c@16000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x16000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					dvi-transmitter@39 {
-						compatible = "sil,sii9022-tpi", "sil,sii9022";
-						reg = <0x39>;
-
-						ports {
-							#address-cells = <1>;
-							#size-cells = <0>;
-
-							/*
-							 * Both the core tile and the motherboard routes their output
-							 * pads to this transmitter. The motherboard system controller
-							 * can select one of them as input using a mux register in
-							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
-							 * the only platform with this specific set-up.
-							 */
-							port@0 {
-								reg = <0>;
-								dvi_bridge_in_ct: endpoint {
-									remote-endpoint = <&clcd_pads_ct>;
-								};
-							};
-							port@1 {
-								reg = <1>;
-								dvi_bridge_in_mb: endpoint {
-									remote-endpoint = <&clcd_pads_mb>;
-								};
-							};
-						};
-					};
-
-					dvi-transmitter@60 {
-						compatible = "sil,sii9022-cpi", "sil,sii9022";
-						reg = <0x60>;
-					};
-				};
-
-				rtc@17000 {
-					compatible = "arm,pl031", "arm,primecell";
-					reg = <0x17000 0x1000>;
-					interrupts = <4>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				compact-flash@1a000 {
-					compatible = "arm,vexpress-cf", "ata-generic";
-					reg = <0x1a000 0x100
-					       0x1a100 0xf00>;
-					reg-shift = <2>;
-				};
-
-
-				clcd@1f000 {
-					compatible = "arm,pl111", "arm,primecell";
-					reg = <0x1f000 0x1000>;
-					interrupt-names = "combined";
-					interrupts = <14>;
-					clocks = <&v2m_oscclk1>, <&smbclk>;
-					clock-names = "clcdclk", "apb_pclk";
-					/* 800x600 16bpp @36MHz works fine */
-					max-memory-bandwidth = <54000000>;
-					memory-region = <&vram>;
-
-					port {
-						clcd_pads_mb: endpoint {
-							remote-endpoint = <&dvi_bridge_in_mb>;
-							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-						};
-					};
-				};
-			};
-
-			v2m_fixed_3v3: fixed-regulator-0 {
-				compatible = "regulator-fixed";
-				regulator-name = "3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			v2m_clk24mhz: clk24mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <24000000>;
-				clock-output-names = "v2m:clk24mhz";
-			};
-
-			v2m_refclk1mhz: refclk1mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <1000000>;
-				clock-output-names = "v2m:refclk1mhz";
-			};
-
-			v2m_refclk32khz: refclk32khz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <32768>;
-				clock-output-names = "v2m:refclk32khz";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				user1 {
-					label = "v2m:green:user1";
-					gpios = <&v2m_led_gpios 0 0>;
-					linux,default-trigger = "heartbeat";
-				};
-
-				user2 {
-					label = "v2m:green:user2";
-					gpios = <&v2m_led_gpios 1 0>;
-					linux,default-trigger = "mmc0";
-				};
-
-				user3 {
-					label = "v2m:green:user3";
-					gpios = <&v2m_led_gpios 2 0>;
-					linux,default-trigger = "cpu0";
-				};
-
-				user4 {
-					label = "v2m:green:user4";
-					gpios = <&v2m_led_gpios 3 0>;
-					linux,default-trigger = "cpu1";
-				};
-
-				user5 {
-					label = "v2m:green:user5";
-					gpios = <&v2m_led_gpios 4 0>;
-					linux,default-trigger = "cpu2";
-				};
-
-				user6 {
-					label = "v2m:green:user6";
-					gpios = <&v2m_led_gpios 5 0>;
-					linux,default-trigger = "cpu3";
-				};
-
-				user7 {
-					label = "v2m:green:user7";
-					gpios = <&v2m_led_gpios 6 0>;
-					linux,default-trigger = "cpu4";
-				};
-
-				user8 {
-					label = "v2m:green:user8";
-					gpios = <&v2m_led_gpios 7 0>;
-					linux,default-trigger = "cpu5";
-				};
-			};
-
-			mcc {
-				compatible = "arm,vexpress,config-bus";
-				arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-				oscclk0 {
-					/* MCC static memory clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 0>;
-					freq-range = <25000000 60000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk0";
-				};
-
-				v2m_oscclk1: oscclk1 {
-					/* CLCD clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 1>;
-					freq-range = <23750000 65000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk1";
-				};
-
-				v2m_oscclk2: oscclk2 {
-					/* IO FPGA peripheral clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 2>;
-					freq-range = <24000000 24000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk2";
-				};
-
-				volt-vio {
-					/* Logic level voltage */
-					compatible = "arm,vexpress-volt";
-					arm,vexpress-sysreg,func = <2 0>;
-					regulator-name = "VIO";
-					regulator-always-on;
-					label = "VIO";
-				};
-
-				temp-mcc {
-					/* MCC internal operating temperature */
-					compatible = "arm,vexpress-temp";
-					arm,vexpress-sysreg,func = <4 0>;
-					label = "MCC";
-				};
-
-				reset {
-					compatible = "arm,vexpress-reset";
-					arm,vexpress-sysreg,func = <5 0>;
-				};
-
-				muxfpga {
-					compatible = "arm,vexpress-muxfpga";
-					arm,vexpress-sysreg,func = <7 0>;
-				};
-
-				shutdown {
-					compatible = "arm,vexpress-shutdown";
-					arm,vexpress-sysreg,func = <8 0>;
-				};
-
-				reboot {
-					compatible = "arm,vexpress-reboot";
-					arm,vexpress-sysreg,func = <9 0>;
-				};
-
-				dvimode {
-					compatible = "arm,vexpress-dvimode";
-					arm,vexpress-sysreg,func = <11 0>;
-				};
-			};
-		};
-	};
-};
\ No newline at end of file
diff --git a/arch/arm/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/dts/vexpress-v2p-ca15_a7.dts
deleted file mode 100644
index 00cd9f5..0000000
--- a/arch/arm/dts/vexpress-v2p-ca15_a7.dts
+++ /dev/null
@@ -1,682 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 A7x3
- * Cortex-A15_A7 MPCore (V2P-CA15_A7)
- *
- * HBI-0249A
- */
-
-/dts-v1/;
-#include "vexpress-v2m-rs1.dtsi"
-
-/ {
-	model = "V2P-CA15_CA7";
-	arm,hbi = <0x249>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			cci-control-port = <&cci_control1>;
-			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <990>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			cci-control-port = <&cci_control1>;
-			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <990>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control2>;
-			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
-			capacity-dmips-mhz = <516>;
-			dynamic-power-coefficient = <133>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control2>;
-			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
-			capacity-dmips-mhz = <516>;
-			dynamic-power-coefficient = <133>;
-		};
-
-		cpu4: cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control2>;
-			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
-			capacity-dmips-mhz = <516>;
-			dynamic-power-coefficient = <133>;
-		};
-
-		idle-states {
-			CLUSTER_SLEEP_BIG: cluster-sleep-big {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				entry-latency-us = <1000>;
-				exit-latency-us = <700>;
-				min-residency-us = <2000>;
-			};
-
-			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				entry-latency-us = <1000>;
-				exit-latency-us = <500>;
-				min-residency-us = <2500>;
-			};
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* Chipselect 2 is physically at 0x18000000 */
-		vram: vram@18000000 {
-			/* 8 MB of designated video RAM */
-			compatible = "shared-dma-pool";
-			reg = <0 0x18000000 0 0x00800000>;
-			no-map;
-		};
-	};
-
-	wdt@2a490000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0 0x2a490000 0 0x1000>;
-		interrupts = <0 98 4>;
-		clocks = <&oscclk6a>, <&oscclk6a>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&hdlcd_clk>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x2000>,
-		      <0 0x2c004000 0 0x2000>,
-		      <0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-
-		pmu@9000 {
-			 compatible = "arm,cci-400-pmu,r0";
-			 reg = <0x9000 0x5000>;
-			 interrupts = <0 105 4>,
-				      <0 101 4>,
-				      <0 102 4>,
-				      <0 103 4>,
-				      <0 104 4>;
-		};
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	dma@7ff00000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0 0x7ff00000 0 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-        scc@7fff0000 {
-		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
-		reg = <0 0x7fff0000 0 0x1000>;
-		interrupts = <0 95 4>;
-        };
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu-a15 {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>;
-	};
-
-	pmu-a7 {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <0 128 4>,
-			     <0 129 4>,
-			     <0 130 4>;
-		interrupt-affinity = <&cpu2>,
-				     <&cpu3>,
-				     <&cpu4>;
-	};
-
-	oscclk6a: oscclk6a {
-		/* Reference 24MHz clock */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "oscclk6a";
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0 {
-			/* A15 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		oscclk1 {
-			/* A15 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		oscclk2 {
-			/* A7 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		oscclk3 {
-			/* A7 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		oscclk4 {
-			/* External AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		hdlcd_clk: oscclk5 {
-			/* HDLCD PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		smbclk: oscclk6 {
-			/* Static memory controller clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 6>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk6";
-		};
-
-		oscclk7 {
-			/* SYS PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 7>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk7";
-		};
-
-		oscclk8 {
-			/* DDR2 PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 8>;
-			freq-range = <20000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk8";
-		};
-
-		volt-a15 {
-			/* A15 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "A15 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A15 Vcore";
-		};
-
-		volt-a7 {
-			/* A7 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "A7 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A7 Vcore";
-		};
-
-		amp-a15 {
-			/* Total current for the two A15 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "A15 Icore";
-		};
-
-		amp-a7 {
-			/* Total current for the three A7 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "A7 Icore";
-		};
-
-		temp-dcc {
-			/* DCC internal temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-
-		power-a15 {
-			/* Total power for the two A15 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "A15 Pcore";
-		};
-
-		power-a7 {
-			/* Total power for the three A7 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "A7 Pcore";
-		};
-
-		energy-a15 {
-			/* Total energy for the two A15 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-			label = "A15 Jcore";
-		};
-
-		energy-a7 {
-			/* Total energy for the three A7 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 2>, <13 3>;
-			label = "A7 Jcore";
-		};
-	};
-
-	etb@20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in_port: endpoint {
-					remote-endpoint = <&replicator_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint {
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-	};
-
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@20040000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			/* Input port #3 is for ITM, not supported here */
-
-			port@4 {
-				reg = <4>;
-				funnel_in_port4: endpoint {
-					remote-endpoint = <&etm1_out_port>;
-				};
-			};
-
-			port@5 {
-				reg = <5>;
-				funnel_in_port5: endpoint {
-					remote-endpoint = <&etm2_out_port>;
-				};
-			};
-		};
-	};
-
-	ptm@2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
-				};
-			};
-		};
-	};
-
-	etm@2203c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203c000 0 0x1000>;
-
-		cpu = <&cpu2>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				etm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port2>;
-				};
-			};
-		};
-	};
-
-	etm@2203d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203d000 0 0x1000>;
-
-		cpu = <&cpu3>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				etm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port4>;
-				};
-			};
-		};
-	};
-
-	etm@2203e000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203e000 0 0x1000>;
-
-		cpu = <&cpu4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				etm2_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port5>;
-				};
-			};
-		};
-	};
-
-	smb: smb@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
-	site2: hsb@40000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x3fef0000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 3>;
-		interrupt-map = <0 0 &gic 0 36 4>,
-				<0 1 &gic 0 37 4>,
-				<0 2 &gic 0 38 4>,
-				<0 3 &gic 0 39 4>;
-	};
-};
diff --git a/arch/arm/dts/vexpress-v2p-ca5s.dts b/arch/arm/dts/vexpress-v2p-ca5s.dts
deleted file mode 100644
index d5b47d5..0000000
--- a/arch/arm/dts/vexpress-v2p-ca5s.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A5x2
- * Cortex-A5 MPCore (V2P-CA5s)
- *
- * HBI-0225B
- */
-
-/dts-v1/;
-#include "vexpress-v2m-rs1.dtsi"
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* Chipselect 2 is physically at 0x18000000 */
-		vram: vram@18000000 {
-			/* 8 MB of designated video RAM */
-			compatible = "shared-dma-pool";
-			reg = <0x18000000 0x00800000>;
-			no-map;
-		};
-	};
-
-	hdlcd@2a110000 {
-		compatible = "arm,hdlcd";
-		reg = <0x2a110000 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&hdlcd_clk>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2a150000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x2a150000 0x1000>;
-		clocks = <&axi_clk>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@2a190000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x2a190000 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&axi_clk>;
-		clock-names = "apb_pclk";
-	};
-
-	scu@2c000000 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0x2c000000 0x58>;
-	};
-
-	timer@2c000600 {
-		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x2c000600 0x20>;
-		interrupts = <1 13 0x304>;
-	};
-
-	timer@2c000200 {
-		compatible = "arm,cortex-a5-global-timer",
-		             "arm,cortex-a9-global-timer";
-		reg = <0x2c000200 0x20>;
-		interrupts = <1 11 0x304>;
-		clocks = <&cpu_clk>;
-	};
-
-	watchdog@2c000620 {
-		compatible = "arm,cortex-a5-twd-wdt";
-		reg = <0x2c000620 0x20>;
-		interrupts = <1 14 0x304>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	L2: cache-controller@2c0f0000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x2c0f0000 0x1000>;
-		interrupts = <0 84 4>;
-		cache-level = <2>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		cpu_clk: oscclk0 {
-			/* CPU and internal AXI reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <50000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		axi_clk: oscclk1 {
-			/* Multiplexed AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <5000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		oscclk2 {
-			/* DDR2 */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <80000000 120000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		hdlcd_clk: oscclk3 {
-			/* HDLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		oscclk4 {
-			/* Test chip gate configuration */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <80000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		smbclk: oscclk5 {
-			/* SMB clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <25000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		temp-dcc {
-			/* DCC internal operating temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-	};
-
-	smb: smb@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
-	site2: hsb@40000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x40000000 0x40000000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 3>;
-		interrupt-map = <0 0 &gic 0 36 4>,
-				<0 1 &gic 0 37 4>,
-				<0 2 &gic 0 38 4>,
-				<0 3 &gic 0 39 4>;
-	};
-};
diff --git a/arch/arm/dts/vexpress-v2p-ca9.dts b/arch/arm/dts/vexpress-v2p-ca9.dts
deleted file mode 100644
index d796efa..0000000
--- a/arch/arm/dts/vexpress-v2p-ca9.dts
+++ /dev/null
@@ -1,368 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A9x4
- * Cortex-A9 MPCore (V2P-CA9)
- *
- * HBI-0191B
- */
-
-/dts-v1/;
-#include "vexpress-v2m.dtsi"
-
-/ {
-	model = "V2P-CA9";
-	arm,hbi = <0x191>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		A9_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		A9_3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* Chipselect 3 is physically at 0x4c000000 */
-		vram: vram@4c000000 {
-			/* 8 MB of designated video RAM */
-			compatible = "shared-dma-pool";
-			reg = <0x4c000000 0x00800000>;
-			no-map;
-		};
-	};
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		/* 1024x768 16bpp @65MHz */
-		max-memory-bandwidth = <95000000>;
-
-		port {
-			clcd_pads_ct: endpoint {
-				remote-endpoint = <&dvi_bridge_in_ct>;
-				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-			};
-		};
-	};
-
-	memory-controller@100e0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x100e0000 0x1000>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@100e1000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x100e1000 0x1000>;
-		interrupts = <0 45 4>,
-			     <0 46 4>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	timer@100e4000 {
-		compatible = "arm,sp804", "arm,primecell";
-		reg = <0x100e4000 0x1000>;
-		interrupts = <0 48 4>,
-			     <0 49 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "timclk", "apb_pclk";
-		status = "disabled";
-	};
-
-	watchdog@100e5000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x100e5000 0x1000>;
-		interrupts = <0 51 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	scu@1e000000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1e000000 0x58>;
-	};
-
-	timer@1e000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1e000600 0x20>;
-		interrupts = <1 13 0xf04>;
-	};
-
-	watchdog@1e000620 {
-		compatible = "arm,cortex-a9-twd-wdt";
-		reg = <0x1e000620 0x20>;
-		interrupts = <1 14 0xf04>;
-	};
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000100 0x100>;
-	};
-
-	L2: cache-controller@1e00a000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x1e00a000 0x1000>;
-		interrupts = <0 43 4>;
-		cache-unified;
-		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
-
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0: extsaxiclk {
-			/* ACLK clock to the AXI master port on the test chip */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <30000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "extsaxiclk";
-		};
-
-		oscclk1: clcdclk {
-			/* Reference clock for the CLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <10000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "clcdclk";
-		};
-
-		smbclk: oscclk2: tcrefclk {
-			/* Reference clock for the test chip internal PLLs */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <33000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "tcrefclk";
-		};
-
-		volt-vd10 {
-			/* Test Chip internal logic voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "VD10";
-			regulator-always-on;
-			label = "VD10";
-		};
-
-		volt-vd10-s2 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "VD10_S2";
-			regulator-always-on;
-			label = "VD10_S2";
-		};
-
-		volt-vd10-s3 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 2>;
-			regulator-name = "VD10_S3";
-			regulator-always-on;
-			label = "VD10_S3";
-		};
-
-		volt-vcc1v8 {
-			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 3>;
-			regulator-name = "VCC1V8";
-			regulator-always-on;
-			label = "VCC1V8";
-		};
-
-		volt-ddr2vtt {
-			/* DDR2 SDRAM VTT termination voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 4>;
-			regulator-name = "DDR2VTT";
-			regulator-always-on;
-			label = "DDR2VTT";
-		};
-
-		volt-vcc3v3 {
-			/* Local board supply for miscellaneous logic external to the Test Chip */
-			arm,vexpress-sysreg,func = <2 5>;
-			compatible = "arm,vexpress-volt";
-			regulator-name = "VCC3V3";
-			regulator-always-on;
-			label = "VCC3V3";
-		};
-
-		amp-vd10-s2 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "VD10_S2";
-		};
-
-		amp-vd10-s3 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "VD10_S3";
-		};
-
-		power-vd10-s2 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "PVD10_S2";
-		};
-
-		power-vd10-s3 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "PVD10_S3";
-		};
-	};
-
-	smb: smb@4000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
-	site2: hsb@e0000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe0000000 0x20000000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 3>;
-		interrupt-map = <0 0 &gic 0 36 4>,
-				<0 1 &gic 0 37 4>,
-				<0 2 &gic 0 38 4>,
-				<0 3 &gic 0 39 4>;
-	};
-};
diff --git a/board/armltd/vexpress/Kconfig b/board/armltd/vexpress/Kconfig
deleted file mode 100644
index 2e15e0d..0000000
--- a/board/armltd/vexpress/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-if TARGET_VEXPRESS_CA15_TC2
-
-config SYS_BOARD
-	default "vexpress"
-
-config SYS_VENDOR
-	default "armltd"
-
-config SYS_CONFIG_NAME
-	default "vexpress_ca15_tc2"
-
-endif
-
-if TARGET_VEXPRESS_CA5X2
-
-config SYS_BOARD
-	default "vexpress"
-
-config SYS_VENDOR
-	default "armltd"
-
-config SYS_CONFIG_NAME
-	default "vexpress_ca5x2"
-
-endif
-
-if TARGET_VEXPRESS_CA9X4
-
-config SYS_BOARD
-	default "vexpress"
-
-config SYS_VENDOR
-	default "armltd"
-
-config SYS_CONFIG_NAME
-	default "vexpress_ca9x4"
-
-endif
diff --git a/board/armltd/vexpress/MAINTAINERS b/board/armltd/vexpress/MAINTAINERS
deleted file mode 100644
index 7b3fb42..0000000
--- a/board/armltd/vexpress/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-VERSATILE EXPRESS BOARDS
-M:	Linus Walleij <linus.walleij@linaro.org>
-S:	Maintained
-F:	board/armltd/vexpress/
-F:	include/configs/vexpress_ca15_tc2.h
-F:	configs/vexpress_ca15_tc2_defconfig
-F:	include/configs/vexpress_ca5x2.h
-F:	configs/vexpress_ca5x2_defconfig
-F:	include/configs/vexpress_ca9x4.h
-F:	configs/vexpress_ca9x4_defconfig
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
deleted file mode 100644
index 2a659de..0000000
--- a/board/armltd/vexpress/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	:= vexpress_common.o
-obj-$(CONFIG_TARGET_VEXPRESS_CA15_TC2)	+= vexpress_tc2.o
diff --git a/board/armltd/vexpress/vexpress_common.c b/board/armltd/vexpress/vexpress_common.c
deleted file mode 100644
index ba3278a..0000000
--- a/board/armltd/vexpress/vexpress_common.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- */
-#include <common.h>
-#include <bootstage.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <malloc.h>
-#include <errno.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/arch/systimer.h>
-#include <asm/arch/sysctrl.h>
-#include <asm/arch/wdt.h>
-#include "../drivers/mmc/arm_pl180_mmci.h"
-
-static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01;
-static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
-
-static void flash__init(void);
-static void vexpress_timer_init(void);
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
-	printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-static inline void delay(ulong loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-	gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS;
-
-	icache_enable();
-	flash__init();
-	vexpress_timer_init();
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
-
-int cpu_mmc_init(struct bd_info *bis)
-{
-	int rc = 0;
-	(void) bis;
-#ifdef CONFIG_ARM_PL180_MMCI
-	struct pl180_mmc_host *host;
-	struct mmc *mmc;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	strcpy(host->name, "MMC");
-	host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
-	host->pwr_init = INIT_PWR;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
-	host->voltages = VOLTAGE_WINDOW_MMC;
-	host->caps = 0;
-	host->clock_in = ARM_MCLK;
-	host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
-	host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
-	rc = arm_pl180_mmci_init(host, &mmc);
-#endif
-	return rc;
-}
-
-static void flash__init(void)
-{
-	/* Setup the sytem control register to allow writing to flash */
-	writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN,
-	       &sysctrl_base->scflashctrl);
-}
-
-int dram_init(void)
-{
-	gd->ram_size =
-		get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size =
-			get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size =
-			get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
-
-	return 0;
-}
-
-/*
- * Start timer:
- *    Setup a 32 bit timer, running at 1KHz
- *    Versatile Express Motherboard provides 1 MHz timer
- */
-static void vexpress_timer_init(void)
-{
-	/*
-	 * Set clock frequency in system controller:
-	 *   VEXPRESS_REFCLK is 32KHz
-	 *   VEXPRESS_TIMCLK is 1MHz
-	 */
-	writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL |
-	       SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL |
-	       readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl);
-
-	/*
-	 * Set Timer0 to be:
-	 *   Enabled, free running, no interrupt, 32-bit, wrapping
-	 */
-	writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
-	writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
-	writel(SYSTIMER_EN | SYSTIMER_32BIT |
-	       readl(&systimer_base->timer0control),
-	       &systimer_base->timer0control);
-}
-
-int v2m_cfg_write(u32 devfn, u32 data)
-{
-	/* Configuration interface broken? */
-	u32 val;
-
-	devfn |= SYS_CFG_START | SYS_CFG_WRITE;
-
-	val = readl(V2M_SYS_CFGSTAT);
-	writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT);
-
-	writel(data, V2M_SYS_CFGDATA);
-	writel(devfn, V2M_SYS_CFGCTRL);
-
-	do {
-		val = readl(V2M_SYS_CFGSTAT);
-	} while (val == 0);
-
-	return !!(val & SYS_CFG_ERR);
-}
-
-/* Use the ARM Watchdog System to cause reset */
-void reset_cpu(void)
-{
-	if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
-		printf("Unable to reboot\n");
-}
-
-void lowlevel_init(void)
-{
-}
-
-ulong get_board_rev(void){
-	return readl((u32 *)SYS_ID);
-}
-
-#ifdef CONFIG_ARMV7_NONSEC
-/* Setting the address at which secondary cores start from.
- * Versatile Express uses one address for all cores, so ignore corenr
- */
-void smp_set_core_boot_addr(unsigned long addr, int corenr)
-{
-	/* The SYSFLAGS register on VExpress needs to be cleared first
-	 * by writing to the next address, since any writes to the address
-	 * at offset 0 will only be ORed in
-	 */
-	writel(~0, CONFIG_SYSFLAGS_ADDR + 4);
-	writel(addr, CONFIG_SYSFLAGS_ADDR);
-}
-#endif
diff --git a/board/armltd/vexpress/vexpress_tc2.c b/board/armltd/vexpress/vexpress_tc2.c
deleted file mode 100644
index 8ee24bd..0000000
--- a/board/armltd/vexpress/vexpress_tc2.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Linaro
- * Jon Medhurst <tixy@linaro.org>
- *
- * TC2 specific code for Versatile Express.
- */
-
-#include <asm/armv7.h>
-#include <asm/io.h>
-#include <asm/u-boot.h>
-#include <common.h>
-#include <linux/libfdt.h>
-
-#define SCC_BASE	0x7fff0000
-
-bool armv7_boot_nonsec_default(void)
-{
-#ifdef CONFIG_ARMV7_BOOT_SEC_DEFAULT
-	return false;
-#else
-	/*
-	 * The Serial Configuration Controller (SCC) register at address 0x700
-	 * contains flags for configuring the behaviour of the Boot Monitor
-	 * (which CPUs execute from reset). Two of these bits are of interest:
-	 *
-	 * bit 12 = Use per-cpu mailboxes for power management
-	 * bit 13 = Power down the non-boot cluster
-	 *
-	 * It is only when both of these are false that U-Boot's current
-	 * implementation of 'nonsec' mode can work as expected because we
-	 * rely on getting all CPUs to execute _nonsec_init, so let's check that.
-	 */
-	return (readl((u32 *)(SCC_BASE + 0x700)) & ((1 << 12) | (1 << 13))) == 0;
-#endif
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *fdt, struct bd_info *bd)
-{
-	int offset, tmp, len;
-	const struct fdt_property *prop;
-	const char *cci_compatible = "arm,cci-400-ctrl-if";
-
-#ifdef CONFIG_ARMV7_NONSEC
-	if (!armv7_boot_nonsec())
-		return 0;
-#else
-	return 0;
-#endif
-	/* Booting in nonsec mode, disable CCI access */
-	offset = fdt_path_offset(fdt, "/cpus");
-	if (offset < 0) {
-		printf("couldn't find /cpus\n");
-		return offset;
-	}
-
-	/* delete cci-control-port in each cpu node */
-	for (tmp = fdt_first_subnode(fdt, offset); tmp >= 0;
-	     tmp = fdt_next_subnode(fdt, tmp))
-		fdt_delprop(fdt, tmp, "cci-control-port");
-
-	/* disable all ace cci slave ports */
-	offset = fdt_node_offset_by_prop_value(fdt, offset, "compatible",
-					       cci_compatible, 20);
-	while (offset > 0) {
-		prop = fdt_get_property(fdt, offset, "interface-type",
-					&len);
-		if (!prop)
-			continue;
-		if (len < 4)
-			continue;
-		if (strcmp(prop->data, "ace"))
-			continue;
-
-		fdt_setprop_string(fdt, offset, "status", "disabled");
-
-		offset = fdt_node_offset_by_prop_value(fdt, offset, "compatible",
-						       cci_compatible, 20);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/configs/vexpress_ca15_tc2_defconfig b/configs/vexpress_ca15_tc2_defconfig
deleted file mode 100644
index e8e401b..0000000
--- a/configs/vexpress_ca15_tc2_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA15_TC2=y
-CONFIG_SYS_TEXT_BASE=0x80800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFF80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x1a000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/vexpress_ca5x2_defconfig b/configs/vexpress_ca5x2_defconfig
deleted file mode 100644
index 88027b9..0000000
--- a/configs/vexpress_ca5x2_defconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA5X2=y
-CONFIG_SYS_TEXT_BASE=0x80800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFF80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x1a000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig
deleted file mode 100644
index 7b14845..0000000
--- a/configs/vexpress_ca9x4_defconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS_CA9X4=y
-CONFIG_SYS_TEXT_BASE=0x60800000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
-CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x47F80000
-CONFIG_ARM_PL180_MMCI=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x4e000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 1844941..57a4efb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -479,7 +479,7 @@
 
 config SYS_I2C_VERSATILE
 	bool "Arm Ltd Versatile I2C bus driver"
-	depends on DM_I2C && (TARGET_VEXPRESS_CA15_TC2 || TARGET_VEXPRESS64_JUNO)
+	depends on DM_I2C && TARGET_VEXPRESS64_JUNO
 	help
 	  Add support for the Arm Ltd Versatile Express I2C driver. The I2C host
 	  controller is present in the development boards manufactured by Arm Ltd.
diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
deleted file mode 100644
index 4f8e635..0000000
--- a/include/configs/vexpress_ca15_tc2.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 Linaro
- * Andre Przywara, <andre.przywara@linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- *   configurations.
- */
-
-#ifndef __VEXPRESS_CA15X2_TC2_h
-#define __VEXPRESS_CA15X2_TC2_h
-
-#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
-#include "vexpress_common.h"
-
-#define CONFIG_SYSFLAGS_ADDR	0x1c010030
-#define CONFIG_SMP_PEN_ADDR	CONFIG_SYSFLAGS_ADDR
-
-#endif
diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h
deleted file mode 100644
index b8079e6..0000000
--- a/include/configs/vexpress_ca5x2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Linaro
- * Ryan Harkin, <ryan.harkin@linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- *   configurations.
- */
-
-#ifndef __VEXPRESS_CA5X2_h
-#define __VEXPRESS_CA5X2_h
-
-#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
-#include "vexpress_common.h"
-
-#endif /* __VEXPRESS_CA5X2_h */
diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h
deleted file mode 100644
index 8157a58..0000000
--- a/include/configs/vexpress_ca9x4.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011 Linaro
- * Ryan Harkin, <ryan.harkin@linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- *   configurations.
- */
-
-#ifndef __VEXPRESS_CA9X4_H
-#define __VEXPRESS_CA9X4_H
-
-#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
-#include "vexpress_common.h"
-
-#endif /* VEXPRESS_CA9X4_H */