blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/*
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/arch/blackfin/cpu/.gitignore b/arch/blackfin/cpu/.gitignore
new file mode 100644
index 0000000..0ec9d56
--- /dev/null
+++ b/arch/blackfin/cpu/.gitignore
@@ -0,0 +1 @@
+bootrom-asm-offsets.[chs]
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
new file mode 100644
index 0000000..211b8d5
--- /dev/null
+++ b/arch/blackfin/cpu/Makefile
@@ -0,0 +1,73 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Licensed under the GPL-2 or later.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+EXTRA :=
+CEXTRA := initcode.o
+SEXTRA := start.o
+SOBJS := interrupt.o cache.o
+COBJS-y += cpu.o
+COBJS-y += interrupts.o
+COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o
+COBJS-y += os_log.o
+COBJS-y += reset.o
+COBJS-y += serial.o
+COBJS-y += traps.o
+COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o
+
+ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
+COBJS-y += initcode.o
+endif
+
+SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
+EXTRA := $(addprefix $(obj),$(EXTRA))
+CEXTRA := $(addprefix $(obj),$(CEXTRA))
+SEXTRA := $(addprefix $(obj),$(SEXTRA))
+
+all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+$(OBJS): $(obj)bootrom-asm-offsets.h
+$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk
+ echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp
+ mv $@.tmp $@
+$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c
+ $(CC) $(CFLAGS) -S $^ -o $@.tmp
+ mv $@.tmp $@
+$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s
+ sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@
+
+# make sure our initcode (which goes into LDR) does not
+# have relocs or external references
+$(obj)initcode.o: CFLAGS += -fno-function-sections -fno-data-sections
+READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $<
+check_initcode: $(obj)initcode.o
+ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
+ @if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \
+ echo "$< contains external references!" 1>&2 ; \
+ exit 1 ; \
+ fi
+endif
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/blackfin/cpu/bootrom-asm-offsets.awk b/arch/blackfin/cpu/bootrom-asm-offsets.awk
new file mode 100755
index 0000000..1d61824
--- /dev/null
+++ b/arch/blackfin/cpu/bootrom-asm-offsets.awk
@@ -0,0 +1,41 @@
+#!/usr/bin/gawk -f
+BEGIN {
+ print "/* DO NOT EDIT: AUTOMATICALLY GENERATED"
+ print " * Input files: bootrom-asm-offsets.awk bootrom-asm-offsets.c.in"
+ print " * DO NOT EDIT: AUTOMATICALLY GENERATED"
+ print " */"
+ print ""
+ system("cat bootrom-asm-offsets.c.in")
+ print "{"
+}
+
+{
+ /* find a structure definition */
+ if ($0 ~ /typedef struct .* {/) {
+ delete members;
+ i = 0;
+
+ /* extract each member of the structure */
+ while (1) {
+ getline
+ if ($1 == "}")
+ break;
+ gsub(/[*;]/, "");
+ members[i++] = $NF;
+ }
+
+ /* grab the structure's name */
+ struct = $NF;
+ sub(/;$/, "", struct);
+
+ /* output the DEFINE() macros */
+ while (i-- > 0)
+ print "\tDEFINE(" struct ", " members[i] ");"
+ print ""
+ }
+}
+
+END {
+ print "\treturn 0;"
+ print "}"
+}
diff --git a/arch/blackfin/cpu/bootrom-asm-offsets.c.in b/arch/blackfin/cpu/bootrom-asm-offsets.c.in
new file mode 100644
index 0000000..3146e46
--- /dev/null
+++ b/arch/blackfin/cpu/bootrom-asm-offsets.c.in
@@ -0,0 +1,12 @@
+/* A little trick taken from the kernel asm-offsets.h where we convert
+ * the C structures automatically into a bunch of defines for use in
+ * the assembly files.
+ */
+
+#include <linux/stddef.h>
+#include <asm/mach-common/bits/bootrom.h>
+
+#define _DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+#define DEFINE(s, m) _DEFINE(offset_##s##_##m, offsetof(s, m))
+
+int main(int argc, char *argv[])
diff --git a/arch/blackfin/cpu/cache.S b/arch/blackfin/cpu/cache.S
new file mode 100644
index 0000000..6ed655a
--- /dev/null
+++ b/arch/blackfin/cpu/cache.S
@@ -0,0 +1,87 @@
+/*
+ * Blackfin cache control code
+ *
+ * Copyright 2003-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/linkage.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+/* Since all L1 caches work the same way, we use the same method for flushing
+ * them. Only the actual flush instruction differs. We write this in asm as
+ * GCC can be hard to coax into writing nice hardware loops.
+ *
+ * Also, we assume the following register setup:
+ * R0 = start address
+ * R1 = end address
+ */
+.macro do_flush flushins:req optflushins optnopins label
+
+ R2 = -L1_CACHE_BYTES;
+
+ /* start = (start & -L1_CACHE_BYTES) */
+ R0 = R0 & R2;
+
+ /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
+ R1 += -1;
+ R1 = R1 & R2;
+ R1 += L1_CACHE_BYTES;
+
+ /* count = (end - start) >> L1_CACHE_SHIFT */
+ R2 = R1 - R0;
+ R2 >>= L1_CACHE_SHIFT;
+ P1 = R2;
+
+.ifnb \label
+\label :
+.endif
+ P0 = R0;
+ LSETUP (1f, 2f) LC1 = P1;
+1:
+.ifnb \optflushins
+ \optflushins [P0];
+.endif
+#if ANOMALY_05000443
+.ifb \optnopins
+2:
+.endif
+ \flushins [P0++];
+.ifnb \optnopins
+2: \optnopins;
+.endif
+#else
+2: \flushins [P0++];
+#endif
+
+ RTS;
+.endm
+
+/* Invalidate all instruction cache lines assocoiated with this memory area */
+ENTRY(_blackfin_icache_flush_range)
+ do_flush IFLUSH, , nop
+ENDPROC(_blackfin_icache_flush_range)
+
+/* Flush all cache lines assocoiated with this area of memory. */
+ENTRY(_blackfin_icache_dcache_flush_range)
+ do_flush FLUSH, IFLUSH
+ENDPROC(_blackfin_icache_dcache_flush_range)
+
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back. Since the Blackfin ISA does not have an "invalidate"
+ * instruction, we use flush/invalidate. Perhaps as a speed optimization we
+ * could bang on the DTEST MMRs ...
+ */
+ENTRY(_blackfin_dcache_flush_invalidate_range)
+ do_flush FLUSHINV
+ENDPROC(_blackfin_dcache_flush_invalidate_range)
+
+/* Flush all data cache lines assocoiated with this memory area */
+ENTRY(_blackfin_dcache_flush_range)
+ do_flush FLUSH, , , .Ldfr
+ENDPROC(_blackfin_dcache_flush_range)
diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c
new file mode 100644
index 0000000..2c8fd86
--- /dev/null
+++ b/arch/blackfin/cpu/cpu.c
@@ -0,0 +1,112 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/ebiu.h>
+#include <asm/mach-common/bits/trace.h>
+
+#include "cpu.h"
+#include "serial.h"
+
+ulong bfin_poweron_retx;
+
+__attribute__ ((__noreturn__))
+void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
+{
+#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
+ /* Build a NOP slide over the LDR jump block. Whee! */
+ char nops[0xC];
+ serial_early_puts("NOP Slide\n");
+ memset(nops, 0x00, sizeof(nops));
+ memcpy((void *)L1_INST_SRAM, nops, sizeof(nops));
+#endif
+
+ if (!loaded_from_ldr) {
+ /* Relocate sections into L1 if the LDR didn't do it -- don't
+ * check length because the linker script does the size
+ * checking at build time.
+ */
+ serial_early_puts("L1 Relocate\n");
+ extern char _stext_l1[], _text_l1_lma[], _text_l1_len[];
+ memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len);
+ extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[];
+ memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len);
+ }
+#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
+ /* The BF537 bootrom will reset the EBIU_AMGCTL register on us
+ * after it has finished loading the LDR. So configure it again.
+ */
+ else
+ bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
+#endif
+
+ /* Save RETX so we can pass it while booting Linux */
+ bfin_poweron_retx = bootflag;
+
+#ifdef CONFIG_DEBUG_DUMP
+ /* Turn on hardware trace buffer */
+ bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
+#endif
+
+#ifndef CONFIG_PANIC_HANG
+ /* Reset upon a double exception rather than just hanging.
+ * Do not do bfin_read on SWRST as that will reset status bits.
+ */
+ bfin_write_SWRST(DOUBLE_FAULT);
+#endif
+
+ serial_early_puts("Board init flash\n");
+ board_init_f(bootflag);
+}
+
+int exception_init(void)
+{
+ bfin_write_EVT3(trap);
+ return 0;
+}
+
+int irq_init(void)
+{
+#ifdef SIC_IMASK0
+ bfin_write_SIC_IMASK0(0);
+ bfin_write_SIC_IMASK1(0);
+# ifdef SIC_IMASK2
+ bfin_write_SIC_IMASK2(0);
+# endif
+#elif defined(SICA_IMASK0)
+ bfin_write_SICA_IMASK0(0);
+ bfin_write_SICA_IMASK1(0);
+#else
+ bfin_write_SIC_IMASK(0);
+#endif
+ bfin_write_EVT2(evt_default); /* NMI */
+ bfin_write_EVT5(evt_default); /* hardware error */
+ bfin_write_EVT6(evt_default); /* core timer */
+ bfin_write_EVT7(evt_default);
+ bfin_write_EVT8(evt_default);
+ bfin_write_EVT9(evt_default);
+ bfin_write_EVT10(evt_default);
+ bfin_write_EVT11(evt_default);
+ bfin_write_EVT12(evt_default);
+ bfin_write_EVT13(evt_default);
+ bfin_write_EVT14(evt_default);
+ bfin_write_EVT15(evt_default);
+ bfin_write_ILAT(0);
+ CSYNC();
+ /* enable hardware error irq */
+ irq_flags = 0x3f;
+ local_irq_enable();
+ return 0;
+}
diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h
new file mode 100644
index 0000000..0a13c28
--- /dev/null
+++ b/arch/blackfin/cpu/cpu.h
@@ -0,0 +1,38 @@
+/*
+ * U-boot - cpu.h
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include <command.h>
+
+void board_reset(void) __attribute__((__weak__));
+void bfin_reset_or_hang(void) __attribute__((__noreturn__));
+void bfin_panic(struct pt_regs *reg);
+void dump(struct pt_regs *regs);
+
+asmlinkage void trap(void);
+asmlinkage void evt_default(void);
+
+#endif
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
new file mode 100644
index 0000000..5f80ad6
--- /dev/null
+++ b/arch/blackfin/cpu/initcode.c
@@ -0,0 +1,687 @@
+/*
+ * initcode.c - Initialize the processor. This is usually entails things
+ * like external memory, voltage regulators, etc... Note that this file
+ * cannot make any function calls as it may be executed all by itself by
+ * the Blackfin's bootrom in LDR format.
+ *
+ * Copyright (c) 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define BFIN_IN_INITCODE
+
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/bootrom.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/ebiu.h>
+#include <asm/mach-common/bits/pll.h>
+#include <asm/mach-common/bits/uart.h>
+
+#include "serial.h"
+
+__attribute__((always_inline))
+static inline void serial_init(void)
+{
+#ifdef __ADSPBF54x__
+# ifdef BFIN_BOOT_UART_USE_RTS
+# define BFIN_UART_USE_RTS 1
+# else
+# define BFIN_UART_USE_RTS 0
+# endif
+ if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+ size_t i;
+
+ /* force RTS rather than relying on auto RTS */
+ bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL);
+
+ /* Wait for the line to clear up. We cannot rely on UART
+ * registers as none of them reflect the status of the RSR.
+ * Instead, we'll sleep for ~10 bit times at 9600 baud.
+ * We can precalc things here by assuming boot values for
+ * PLL rather than loading registers and calculating.
+ * baud = SCLK / (16 ^ (1 - EDBO) * Divisor)
+ * EDB0 = 0
+ * Divisor = (SCLK / baud) / 16
+ * SCLK = baud * 16 * Divisor
+ * SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5
+ * CCLK = (16 * Divisor * 5) * (9600 / 10)
+ * In reality, this will probably be just about 1 second delay,
+ * so assuming 9600 baud is OK (both as a very low and too high
+ * speed as this will buffer things enough).
+ */
+#define _NUMBITS (10) /* how many bits to delay */
+#define _LOWBAUD (9600) /* low baud rate */
+#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */
+#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */
+#define _NUMINS (3) /* how many instructions in loop */
+#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS)
+ i = _CCLK;
+ while (i--)
+ asm volatile("" : : : "memory");
+ }
+#endif
+
+ if (BFIN_DEBUG_EARLY_SERIAL) {
+ int ucen = bfin_read16(&pUART->gctl) & UCEN;
+ serial_early_init();
+
+ /* If the UART is off, that means we need to program
+ * the baud rate ourselves initially.
+ */
+ if (ucen != UCEN)
+ serial_early_set_baud(CONFIG_BAUDRATE);
+ }
+}
+
+__attribute__((always_inline))
+static inline void serial_deinit(void)
+{
+#ifdef __ADSPBF54x__
+ if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+ /* clear forced RTS rather than relying on auto RTS */
+ bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL);
+ }
+#endif
+}
+
+__attribute__((always_inline))
+static inline void serial_putc(char c)
+{
+ if (!BFIN_DEBUG_EARLY_SERIAL)
+ return;
+
+ if (c == '\n')
+ serial_putc('\r');
+
+ bfin_write16(&pUART->thr, c);
+
+ while (!(bfin_read16(&pUART->lsr) & TEMT))
+ continue;
+}
+
+
+/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
+ * us a freq of 16MHz for SPI which should generally be
+ * slow enough for the slow reads the bootrom uses.
+ */
+#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \
+ ((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \
+ (defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1))
+# define BOOTROM_SUPPORTS_SPI_FAST_READ 1
+#else
+# define BOOTROM_SUPPORTS_SPI_FAST_READ 0
+#endif
+#ifndef CONFIG_SPI_BAUD_INITBLOCK
+# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4)
+#endif
+#ifdef SPI0_BAUD
+# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD
+#endif
+
+/* PLL_DIV defines */
+#ifndef CONFIG_PLL_DIV_VAL
+# if (CONFIG_CCLK_DIV == 1)
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+# elif (CONFIG_CCLK_DIV == 2)
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+# elif (CONFIG_CCLK_DIV == 4)
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+# elif (CONFIG_CCLK_DIV == 8)
+# define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+# else
+# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
+# endif
+# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV)
+#endif
+
+#ifndef CONFIG_PLL_LOCKCNT_VAL
+# define CONFIG_PLL_LOCKCNT_VAL 0x0300
+#endif
+
+#ifndef CONFIG_PLL_CTL_VAL
+# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF)
+#endif
+
+#ifndef CONFIG_EBIU_RSTCTL_VAL
+# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */
+#endif
+#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0)
+# error invalid EBIU_RSTCTL value: must not set reserved bits
+#endif
+
+#ifndef CONFIG_EBIU_MBSCTL_VAL
+# define CONFIG_EBIU_MBSCTL_VAL 0
+#endif
+
+#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0)
+# error invalid EBIU_DDRQUE value: must not set reserved bits
+#endif
+
+/* Make sure our voltage value is sane so we don't blow up! */
+#ifndef CONFIG_VR_CTL_VAL
+# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV)
+# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__)
+# define CCLK_VLEV_120 400000000
+# define CCLK_VLEV_125 533000000
+# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
+# define CCLK_VLEV_120 401000000
+# define CCLK_VLEV_125 401000000
+# elif defined(__ADSPBF561__)
+# define CCLK_VLEV_120 300000000
+# define CCLK_VLEV_125 501000000
+# endif
+# if BFIN_CCLK < CCLK_VLEV_120
+# define CONFIG_VR_CTL_VLEV VLEV_120
+# elif BFIN_CCLK < CCLK_VLEV_125
+# define CONFIG_VR_CTL_VLEV VLEV_125
+# else
+# define CONFIG_VR_CTL_VLEV VLEV_130
+# endif
+# if defined(__ADSPBF52x__) /* TBD; use default */
+# undef CONFIG_VR_CTL_VLEV
+# define CONFIG_VR_CTL_VLEV VLEV_110
+# elif defined(__ADSPBF54x__) /* TBD; use default */
+# undef CONFIG_VR_CTL_VLEV
+# define CONFIG_VR_CTL_VLEV VLEV_120
+# elif defined(__ADSPBF538__) || defined(__ADSPBF539__) /* TBD; use default */
+# undef CONFIG_VR_CTL_VLEV
+# define CONFIG_VR_CTL_VLEV VLEV_125
+# endif
+
+# ifdef CONFIG_BFIN_MAC
+# define CONFIG_VR_CTL_CLKBUF CLKBUFOE
+# else
+# define CONFIG_VR_CTL_CLKBUF 0
+# endif
+
+# if defined(__ADSPBF52x__)
+# define CONFIG_VR_CTL_FREQ FREQ_1000
+# else
+# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000)
+# endif
+
+# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
+#endif
+
+/* some parts do not have an on-chip voltage regulator */
+#if defined(__ADSPBF51x__)
+# define CONFIG_HAS_VR 0
+# undef CONFIG_VR_CTL_VAL
+# define CONFIG_VR_CTL_VAL 0
+#else
+# define CONFIG_HAS_VR 1
+#endif
+
+#if CONFIG_MEM_SIZE
+#ifndef EBIU_RSTCTL
+/* Blackfin with SDRAM */
+#ifndef CONFIG_EBIU_SDBCTL_VAL
+# if CONFIG_MEM_SIZE == 16
+# define CONFIG_EBSZ_VAL EBSZ_16
+# elif CONFIG_MEM_SIZE == 32
+# define CONFIG_EBSZ_VAL EBSZ_32
+# elif CONFIG_MEM_SIZE == 64
+# define CONFIG_EBSZ_VAL EBSZ_64
+# elif CONFIG_MEM_SIZE == 128
+# define CONFIG_EBSZ_VAL EBSZ_128
+# elif CONFIG_MEM_SIZE == 256
+# define CONFIG_EBSZ_VAL EBSZ_256
+# elif CONFIG_MEM_SIZE == 512
+# define CONFIG_EBSZ_VAL EBSZ_512
+# else
+# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE
+# endif
+# if CONFIG_MEM_ADD_WDTH == 8
+# define CONFIG_EBCAW_VAL EBCAW_8
+# elif CONFIG_MEM_ADD_WDTH == 9
+# define CONFIG_EBCAW_VAL EBCAW_9
+# elif CONFIG_MEM_ADD_WDTH == 10
+# define CONFIG_EBCAW_VAL EBCAW_10
+# elif CONFIG_MEM_ADD_WDTH == 11
+# define CONFIG_EBCAW_VAL EBCAW_11
+# else
+# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH
+# endif
+# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE)
+#endif
+#endif
+#endif
+
+/* Conflicting Column Address Widths Causes SDRAM Errors:
+ * EB2CAW and EB3CAW must be the same
+ */
+#if ANOMALY_05000362
+# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
+# error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
+# endif
+#endif
+
+__attribute__((always_inline)) static inline void
+program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
+{
+ serial_putc('a');
+
+ /* Save the clock pieces that are used in baud rate calculation */
+ if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+ serial_putc('b');
+ *sdivB = bfin_read_PLL_DIV() & 0xf;
+ *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f;
+ *divB = serial_early_get_div();
+ serial_putc('c');
+ }
+
+ serial_putc('d');
+
+#ifdef CONFIG_HW_WATCHDOG
+# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
+# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000
+# endif
+ /* Program the watchdog with an initial timeout of ~20 seconds.
+ * Hopefully that should be long enough to load the u-boot LDR
+ * (from wherever) and then the common u-boot code can take over.
+ * In bypass mode, the start.S would have already set a much lower
+ * timeout, so don't clobber that.
+ */
+ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
+ serial_putc('e');
+ bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
+ bfin_write_WDOG_CTL(0);
+ serial_putc('f');
+ }
+#endif
+
+ serial_putc('g');
+
+ /* Blackfin bootroms use the SPI slow read opcode instead of the SPI
+ * fast read, so we need to slow down the SPI clock a lot more during
+ * boot. Once we switch over to u-boot's SPI flash driver, we'll
+ * increase the speed appropriately.
+ */
+ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
+ serial_putc('h');
+ if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4)
+ bs->dFlags |= BFLAG_FASTREAD;
+ bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
+ serial_putc('i');
+ }
+
+ serial_putc('j');
+}
+
+__attribute__((always_inline)) static inline bool
+maybe_self_refresh(ADI_BOOT_DATA *bs)
+{
+ serial_putc('a');
+
+ if (!CONFIG_MEM_SIZE)
+ return false;
+
+ /* If external memory is enabled, put it into self refresh first. */
+#ifdef EBIU_RSTCTL
+ if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) {
+ serial_putc('b');
+ bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ);
+ return true;
+ }
+#else
+ if (bfin_read_EBIU_SDBCTL() & EBE) {
+ serial_putc('b');
+ bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
+ return true;
+ }
+#endif
+
+ serial_putc('c');
+
+ return false;
+}
+
+__attribute__((always_inline)) static inline u16
+program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs)
+{
+ u16 vr_ctl;
+
+ serial_putc('a');
+
+ vr_ctl = bfin_read_VR_CTL();
+
+ serial_putc('b');
+
+ /* If we're entering self refresh, make sure it has happened. */
+ if (put_into_srfs)
+#ifdef EBIU_RSTCTL
+ while (!(bfin_read_EBIU_RSTCTL() & SRACK))
+#else
+ while (!(bfin_read_EBIU_SDSTAT() & SDSRA))
+#endif
+ continue;
+
+ serial_putc('c');
+
+ /* With newer bootroms, we use the helper function to set up
+ * the memory controller. Older bootroms lacks such helpers
+ * so we do it ourselves.
+ */
+ if (!ANOMALY_05000386) {
+ serial_putc('d');
+
+ /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
+ ADI_SYSCTRL_VALUES memory_settings;
+ uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
+ if (CONFIG_HAS_VR) {
+ actions |= SYSCTRL_VRCTL;
+ if (CONFIG_VR_CTL_VAL & FREQ_MASK)
+ actions |= SYSCTRL_INTVOLTAGE;
+ else
+ actions |= SYSCTRL_EXTVOLTAGE;
+ memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
+ } else
+ actions |= SYSCTRL_EXTVOLTAGE;
+ memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
+ memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
+ memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
+#if ANOMALY_05000432
+ bfin_write_SIC_IWR1(0);
+#endif
+ serial_putc('e');
+ bfrom_SysControl(actions, &memory_settings, NULL);
+ serial_putc('f');
+#if ANOMALY_05000432
+ bfin_write_SIC_IWR1(-1);
+#endif
+#if ANOMALY_05000171
+ bfin_write_SICA_IWR0(-1);
+ bfin_write_SICA_IWR1(-1);
+#endif
+ serial_putc('g');
+ } else {
+ serial_putc('h');
+
+ /* Disable all peripheral wakeups except for the PLL event. */
+#ifdef SIC_IWR0
+ bfin_write_SIC_IWR0(1);
+ bfin_write_SIC_IWR1(0);
+# ifdef SIC_IWR2
+ bfin_write_SIC_IWR2(0);
+# endif
+#elif defined(SICA_IWR0)
+ bfin_write_SICA_IWR0(1);
+ bfin_write_SICA_IWR1(0);
+#else
+ bfin_write_SIC_IWR(1);
+#endif
+
+ serial_putc('i');
+
+ /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
+ bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
+
+ serial_putc('j');
+
+ /* Only reprogram when needed to avoid triggering unnecessary
+ * PLL relock sequences.
+ */
+ if (vr_ctl != CONFIG_VR_CTL_VAL) {
+ serial_putc('?');
+ bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
+ asm("idle;");
+ serial_putc('!');
+ }
+
+ serial_putc('k');
+
+ bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
+
+ serial_putc('l');
+
+ /* Only reprogram when needed to avoid triggering unnecessary
+ * PLL relock sequences.
+ */
+ if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
+ serial_putc('?');
+ bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
+ asm("idle;");
+ serial_putc('!');
+ }
+
+ serial_putc('m');
+
+ /* Restore all peripheral wakeups. */
+#ifdef SIC_IWR0
+ bfin_write_SIC_IWR0(-1);
+ bfin_write_SIC_IWR1(-1);
+# ifdef SIC_IWR2
+ bfin_write_SIC_IWR2(-1);
+# endif
+#elif defined(SICA_IWR0)
+ bfin_write_SICA_IWR0(-1);
+ bfin_write_SICA_IWR1(-1);
+#else
+ bfin_write_SIC_IWR(-1);
+#endif
+
+ serial_putc('n');
+ }
+
+ serial_putc('o');
+
+ return vr_ctl;
+}
+
+__attribute__((always_inline)) static inline void
+update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB)
+{
+ serial_putc('a');
+
+ /* Since we've changed the SCLK above, we may need to update
+ * the UART divisors (UART baud rates are based on SCLK).
+ * Do the division by hand as there are no native instructions
+ * for dividing which means we'd generate a libgcc reference.
+ */
+ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+ serial_putc('b');
+ unsigned int sdivR, vcoR;
+ sdivR = bfin_read_PLL_DIV() & 0xf;
+ vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
+ int dividend = sdivB * divB * vcoR;
+ int divisor = vcoB * sdivR;
+ unsigned int quotient;
+ for (quotient = 0; dividend > 0; ++quotient)
+ dividend -= divisor;
+ serial_early_put_div(quotient - ANOMALY_05000230);
+ serial_putc('c');
+ }
+
+ serial_putc('d');
+}
+
+__attribute__((always_inline)) static inline void
+program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
+{
+ serial_putc('a');
+
+ if (!CONFIG_MEM_SIZE)
+ return;
+
+ serial_putc('b');
+
+ /* Program the external memory controller before we come out of
+ * self-refresh. This only works with our SDRAM controller.
+ */
+#ifndef EBIU_RSTCTL
+# ifdef CONFIG_EBIU_SDRRC_VAL
+ bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
+# endif
+# ifdef CONFIG_EBIU_SDBCTL_VAL
+ bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_SDGCTL_VAL
+ bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
+# endif
+#endif
+
+ serial_putc('c');
+
+ /* Now that we've reprogrammed, take things out of self refresh. */
+ if (put_into_srfs)
+#ifdef EBIU_RSTCTL
+ bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+#else
+ bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS));
+#endif
+
+ serial_putc('d');
+
+ /* Our DDR controller sucks and cannot be programmed while in
+ * self-refresh. So we have to pull it out before programming.
+ */
+#ifdef EBIU_RSTCTL
+# ifdef CONFIG_EBIU_RSTCTL_VAL
+ bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL0_VAL
+ bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL1_VAL
+ bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL2_VAL
+ bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL3_VAL
+ /* default is disable, so don't need to force this */
+ bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRQUE_VAL
+ bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL);
+# endif
+#endif
+
+ serial_putc('e');
+}
+
+__attribute__((always_inline)) static inline void
+check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs)
+{
+ serial_putc('a');
+
+ if (!CONFIG_MEM_SIZE)
+ return;
+
+ serial_putc('b');
+
+ /* Are we coming out of hibernate (suspend to memory) ?
+ * The memory layout is:
+ * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF)
+ * 0x4: return address
+ * 0x8: stack pointer
+ *
+ * SCKELOW is unreliable on older parts (anomaly 307)
+ */
+ if (ANOMALY_05000307 || vr_ctl & 0x8000) {
+ uint32_t *hibernate_magic = 0;
+ __builtin_bfin_ssync(); /* make sure memory controller is done */
+ if (hibernate_magic[0] == 0xDEADBEEF) {
+ serial_putc('c');
+ bfin_write_EVT15(hibernate_magic[1]);
+ bfin_write_IMASK(EVT_IVG15);
+ __asm__ __volatile__ (
+ /* load reti early to avoid anomaly 281 */
+ "reti = %0;"
+ /* clear hibernate magic */
+ "[%0] = %1;"
+ /* load stack pointer */
+ "SP = [%0 + 8];"
+ /* lower ourselves from reset ivg to ivg15 */
+ "raise 15;"
+ "rti;"
+ :
+ : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */)
+ );
+ }
+ serial_putc('d');
+ }
+
+ serial_putc('e');
+}
+
+__attribute__((always_inline)) static inline void
+program_async_controller(ADI_BOOT_DATA *bs)
+{
+ serial_putc('a');
+
+ /* Program the async banks controller. */
+ bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
+ bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
+ bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
+
+ serial_putc('b');
+
+ /* Not all parts have these additional MMRs. */
+#ifdef EBIU_MODE
+# ifdef CONFIG_EBIU_MBSCTL_VAL
+ bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_MODE_VAL
+ bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
+# endif
+# ifdef CONFIG_EBIU_FCTL_VAL
+ bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
+# endif
+#endif
+
+ serial_putc('c');
+}
+
+BOOTROM_CALLED_FUNC_ATTR
+void initcode(ADI_BOOT_DATA *bs)
+{
+ ADI_BOOT_DATA bootstruct_scratch;
+
+ serial_init();
+
+ serial_putc('A');
+
+ /* If the bootstruct is NULL, then it's because we're loading
+ * dynamically and not via LDR (bootrom). So set the struct to
+ * some scratch space.
+ */
+ if (!bs)
+ bs = &bootstruct_scratch;
+
+ serial_putc('B');
+ bool put_into_srfs = maybe_self_refresh(bs);
+
+ serial_putc('C');
+ uint sdivB, divB, vcoB;
+ program_early_devices(bs, &sdivB, &divB, &vcoB);
+
+ serial_putc('D');
+ u16 vr_ctl = program_clocks(bs, put_into_srfs);
+
+ serial_putc('E');
+ update_serial_clocks(bs, sdivB, divB, vcoB);
+
+ serial_putc('F');
+ program_memory_controller(bs, put_into_srfs);
+
+ serial_putc('G');
+ check_hibernation(bs, vr_ctl, put_into_srfs);
+
+ serial_putc('H');
+ program_async_controller(bs);
+
+#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
+ serial_putc('I');
+ /* tell the bootrom where our entry point is */
+ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
+ bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
+#endif
+
+ serial_putc('>');
+ serial_putc('\n');
+
+ serial_deinit();
+}
diff --git a/arch/blackfin/cpu/interrupt.S b/arch/blackfin/cpu/interrupt.S
new file mode 100644
index 0000000..69bba3f
--- /dev/null
+++ b/arch/blackfin/cpu/interrupt.S
@@ -0,0 +1,152 @@
+/*
+ * interrupt.S - trampoline default exceptions/interrupts to C handlers
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/entry.h>
+#include <asm/ptrace.h>
+#include <asm/deferred.h>
+#include <asm/mach-common/bits/core.h>
+
+.text
+
+/* default entry point for exceptions */
+ENTRY(_trap)
+ CONFIG_BFIN_SCRATCH_REG = sp;
+ sp.l = LO(L1_SRAM_SCRATCH_END - 20);
+ sp.h = HI(L1_SRAM_SCRATCH_END - 20);
+ SAVE_ALL_SYS
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = 3; /* EVT3 space */
+ sp += -12;
+ call _trap_c;
+ sp += 12;
+
+#ifdef CONFIG_EXCEPTION_DEFER
+ CC = R0 == 0;
+ IF CC JUMP .Lexit_trap;
+
+ /* To avoid double faults, lower our priority to IRQ5 */
+ p4.l = lo(COREMMR_BASE);
+ p4.h = hi(COREMMR_BASE);
+
+ r7.h = _exception_to_level5;
+ r7.l = _exception_to_level5;
+ [p4 + (EVT5 - COREMMR_BASE)] = r7;
+
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ */
+ p5.l = _deferred_regs;
+ p5.h = _deferred_regs;
+ r6 = [p4 + (DCPLB_FAULT_ADDR - COREMMR_BASE)];
+ [p5 + (deferred_regs_DCPLB_FAULT_ADDR * 4)] = r6;
+
+ r6 = [p4 + (ICPLB_FAULT_ADDR - COREMMR_BASE)];
+ [p5 + (deferred_regs_ICPLB_FAULT_ADDR * 4)] = r6;
+
+ /* Save the state of single stepping */
+ r6 = SYSCFG;
+ [p5 + (deferred_regs_SYSCFG * 4)] = r6;
+ /* Clear it while we handle the exception in IRQ5 mode
+ * RESTORE_ALL_SYS will load it, so all we need to do is store it
+ * in the right place
+ */
+ BITCLR(r6, SYSCFG_SSSTEP_P);
+ [SP + PT_SYSCFG] = r6;
+
+ /* Since we are going to clobber RETX, we need to save it */
+ r6 = retx;
+ [p5 + (deferred_regs_retx * 4)] = r6;
+
+ /* Save the current IMASK, since we change in order to jump to level 5 */
+ cli r6;
+ [p5 + (deferred_regs_IMASK * 4)] = r6;
+
+ /* Disable all interrupts, but make sure level 5 is enabled so
+ * we can switch to that level.
+ */
+ r6 = 0x3f;
+ sti r6;
+
+ /* Clobber RETX so we don't end up back at a faulting instruction */
+ [sp + PT_RETX] = r7;
+
+ /* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+ * clear it (re-enabling interrupts again) by the special sequence of pushing
+ * RETI onto the stack. This way we can lower ourselves to IVG5 even if the
+ * exception was taken after the interrupt handler was called but before it
+ * got a chance to enable global interrupts itself.
+ */
+ [--sp] = reti;
+ sp += 4;
+
+ RAISE 5;
+.Lexit_trap:
+#endif
+
+#if ANOMALY_05000257
+ R7 = LC0;
+ LC0 = R7;
+ R7 = LC1;
+ LC1 = R7;
+#endif
+
+ RESTORE_ALL_SYS
+ sp = CONFIG_BFIN_SCRATCH_REG;
+ rtx;
+ENDPROC(_trap)
+
+#ifdef CONFIG_EXCEPTION_DEFER
+/* Deferred (IRQ5) exceptions */
+ENTRY(_exception_to_level5)
+ SAVE_ALL_SYS
+
+ /* Now we have to fix things up */
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ r0.l = _evt_default;
+ r0.h = _evt_default;
+ [p4] = r0;
+ csync;
+
+ p4.l = _deferred_regs;
+ p4.h = _deferred_regs;
+ r0 = [p4 + (deferred_regs_retx * 4)];
+ [sp + PT_PC] = r0;
+
+ r0 = [p4 + (deferred_regs_SYSCFG * 4)];
+ [sp + PT_SYSCFG] = r0;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = 5; /* EVT5 space */
+ sp += -12;
+ call _trap_c;
+ sp += 12;
+
+ /* Restore IMASK */
+ r0 = [p4 + (deferred_regs_IMASK * 4)];
+ sti r0;
+
+ RESTORE_ALL_SYS
+
+ rti;
+ENDPROC(_exception_to_level5)
+#endif
+
+/* default entry point for interrupts */
+ENTRY(_evt_default)
+ SAVE_ALL_SYS
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ sp += -12;
+ call _bfin_panic;
+ sp += 12;
+ RESTORE_ALL_SYS
+ rti;
+ENDPROC(_evt_default)
diff --git a/arch/blackfin/cpu/interrupts.c b/arch/blackfin/cpu/interrupts.c
new file mode 100644
index 0000000..54a67b4
--- /dev/null
+++ b/arch/blackfin/cpu/interrupts.c
@@ -0,0 +1,159 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ * BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <watchdog.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags; /* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On Blackfin it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On Blackfin it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ ulong tbclk;
+
+ tbclk = CONFIG_SYS_HZ;
+ return tbclk;
+}
+
+void enable_interrupts(void)
+{
+ local_irq_restore(int_flag);
+}
+
+int disable_interrupts(void)
+{
+ local_irq_save(int_flag);
+ return 1;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long delay, start, stop;
+ unsigned long cclk;
+ cclk = (CONFIG_CCLK_HZ);
+
+ while (usec > 1) {
+ WATCHDOG_RESET();
+
+ /*
+ * how many clock ticks to delay?
+ * - request(in useconds) * clock_ticks(Hz) / useconds/second
+ */
+ if (usec < 1000) {
+ delay = (usec * (cclk / 244)) >> 12;
+ usec = 0;
+ } else {
+ delay = (1000 * (cclk / 244)) >> 12;
+ usec -= 1000;
+ }
+
+ asm volatile (" %0 = CYCLES;" : "=r" (start));
+ do {
+ asm volatile (" %0 = CYCLES; " : "=r" (stop));
+ } while (stop - start < delay);
+ }
+
+ return;
+}
+
+#define MAX_TIM_LOAD 0xFFFFFFFF
+int timer_init(void)
+{
+ bfin_write_TCNTL(0x1);
+ CSYNC();
+ bfin_write_TSCALE(0x0);
+ bfin_write_TCOUNT(MAX_TIM_LOAD);
+ bfin_write_TPERIOD(MAX_TIM_LOAD);
+ bfin_write_TCNTL(0x7);
+ CSYNC();
+
+ timestamp = 0;
+ last_time = 0;
+
+ return 0;
+}
+
+/*
+ * Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ * As get_timer is used in the u-boot
+ * only for timeouts this should be
+ * sufficient
+ */
+ulong get_timer(ulong base)
+{
+ ulong milisec;
+
+ /* Number of clocks elapsed */
+ ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT());
+
+ /*
+ * Find if the TCOUNT is reset
+ * timestamp gives the number of times
+ * TCOUNT got reset
+ */
+ if (clocks < last_time)
+ timestamp++;
+ last_time = clocks;
+
+ /* Get the number of milliseconds */
+ milisec = clocks / (CONFIG_CCLK_HZ / 1000);
+
+ /*
+ * Find the number of millisonds that
+ * got elapsed before this TCOUNT cycle
+ */
+ milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
+
+ return (milisec - base);
+}
+
+void reset_timer(void)
+{
+ timer_init();
+}
diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c
new file mode 100644
index 0000000..1cd619f
--- /dev/null
+++ b/arch/blackfin/cpu/jtag-console.c
@@ -0,0 +1,132 @@
+/*
+ * jtag-console.c - console driver over Blackfin JTAG
+ *
+ * Copyright (c) 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <stdio_dev.h>
+#include <asm/blackfin.h>
+
+#ifndef CONFIG_JTAG_CONSOLE_TIMEOUT
+# define CONFIG_JTAG_CONSOLE_TIMEOUT 500
+#endif
+
+/* The Blackfin tends to be much much faster than the JTAG hardware. */
+static void jtag_write_emudat(uint32_t emudat)
+{
+ static bool overflowed = false;
+ ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT;
+ while (bfin_read_DBGSTAT() & 0x1) {
+ if (overflowed)
+ return;
+ if (timeout < get_timer(0))
+ overflowed = true;
+ }
+ overflowed = false;
+ __asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+}
+/* Transmit a buffer. The format is:
+ * [32bit length][actual data]
+ */
+static void jtag_send(const char *c, uint32_t len)
+{
+ uint32_t i;
+
+ if (len == 0)
+ return;
+
+ /* First send the length */
+ jtag_write_emudat(len);
+
+ /* Then send the data */
+ for (i = 0; i < len; i += 4)
+ jtag_write_emudat((c[i] << 0) | (c[i+1] << 8) | (c[i+2] << 16) | (c[i+3] << 24));
+}
+static void jtag_putc(const char c)
+{
+ jtag_send(&c, 1);
+}
+static void jtag_puts(const char *s)
+{
+ jtag_send(s, strlen(s));
+}
+
+static size_t inbound_len, leftovers_len;
+
+/* Lower layers want to know when jtag has data */
+static int jtag_tstc_dbg(void)
+{
+ return (bfin_read_DBGSTAT() & 0x2);
+}
+
+/* Higher layers want to know when any data is available */
+static int jtag_tstc(void)
+{
+ return jtag_tstc_dbg() || leftovers_len;
+}
+
+/* Receive a buffer. The format is:
+ * [32bit length][actual data]
+ */
+static uint32_t leftovers;
+static int jtag_getc(void)
+{
+ int ret;
+ uint32_t emudat;
+
+ /* see if any data is left over */
+ if (leftovers_len) {
+ --leftovers_len;
+ ret = leftovers & 0xff;
+ leftovers >>= 8;
+ return ret;
+ }
+
+ /* wait for new data ! */
+ while (!jtag_tstc_dbg())
+ continue;
+ __asm__("%0 = emudat;" : "=d"(emudat));
+
+ if (inbound_len == 0) {
+ /* grab the length */
+ inbound_len = emudat;
+ } else {
+ /* store the bytes */
+ leftovers_len = min(4, inbound_len);
+ inbound_len -= leftovers_len;
+ leftovers = emudat;
+ }
+
+ return jtag_getc();
+}
+
+int drv_jtag_console_init(void)
+{
+ struct stdio_dev dev;
+ int ret;
+
+ memset(&dev, 0x00, sizeof(dev));
+ strcpy(dev.name, "jtag");
+ dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ dev.putc = jtag_putc;
+ dev.puts = jtag_puts;
+ dev.tstc = jtag_tstc;
+ dev.getc = jtag_getc;
+
+ ret = stdio_register(&dev);
+ return (ret == 0 ? 1 : ret);
+}
+
+#ifdef CONFIG_UART_CONSOLE_IS_JTAG
+/* Since the JTAG is always available (at power on), allow it to fake a UART */
+void serial_set_baud(uint32_t baud) {}
+void serial_setbrg(void) {}
+int serial_init(void) { return 0; }
+void serial_putc(const char c) __attribute__((alias("jtag_putc")));
+void serial_puts(const char *s) __attribute__((alias("jtag_puts")));
+int serial_tstc(void) __attribute__((alias("jtag_tstc")));
+int serial_getc(void) __attribute__((alias("jtag_getc")));
+#endif
diff --git a/arch/blackfin/cpu/os_log.c b/arch/blackfin/cpu/os_log.c
new file mode 100644
index 0000000..e1c8e29
--- /dev/null
+++ b/arch/blackfin/cpu/os_log.c
@@ -0,0 +1,30 @@
+/*
+ * functions for handling OS log buffer
+ *
+ * Copyright (c) 2009 Analog Devices Inc.
+ *
+ * Licensed under the 2-clause BSD.
+ */
+
+#include <common.h>
+
+#define OS_LOG_MAGIC 0xDEADBEEF
+#define OS_LOG_MAGIC_ADDR ((unsigned long *)0x4f0)
+#define OS_LOG_PTR_ADDR ((char **)0x4f4)
+
+bool bfin_os_log_check(void)
+{
+ if (*OS_LOG_MAGIC_ADDR != OS_LOG_MAGIC)
+ return false;
+ *OS_LOG_MAGIC_ADDR = 0;
+ return true;
+}
+
+void bfin_os_log_dump(void)
+{
+ char *log = *OS_LOG_PTR_ADDR;
+ while (*log) {
+ puts(log);
+ log += strlen(log) + 1;
+ }
+}
diff --git a/arch/blackfin/cpu/reset.c b/arch/blackfin/cpu/reset.c
new file mode 100644
index 0000000..e3be740
--- /dev/null
+++ b/arch/blackfin/cpu/reset.c
@@ -0,0 +1,106 @@
+/*
+ * reset.c - logic for resetting the cpu
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+/* A system soft reset makes external memory unusable so force
+ * this function into L1. We use the compiler ssync here rather
+ * than SSYNC() because it's safe (no interrupts and such) and
+ * we save some L1. We do not need to force sanity in the SYSCR
+ * register as the BMODE selection bit is cleared by the soft
+ * reset while the Core B bit (on dual core parts) is cleared by
+ * the core reset.
+ */
+__attribute__ ((__l1_text__, __noreturn__))
+static void bfin_reset(void)
+{
+ /* Wait for completion of "system" events such as cache line
+ * line fills so that we avoid infinite stalls later on as
+ * much as possible. This code is in L1, so it won't trigger
+ * any such event after this point in time.
+ */
+ __builtin_bfin_ssync();
+
+ /* The bootrom checks to see how it was reset and will
+ * automatically perform a software reset for us when
+ * it starts executing after the core reset.
+ */
+ if (ANOMALY_05000353 || ANOMALY_05000386) {
+ /* Initiate System software reset. */
+ bfin_write_SWRST(0x7);
+
+ /* Due to the way reset is handled in the hardware, we need
+ * to delay for 10 SCLKS. The only reliable way to do this is
+ * to calculate the CCLK/SCLK ratio and multiply 10. For now,
+ * we'll assume worse case which is a 1:15 ratio.
+ */
+ asm(
+ "LSETUP (1f, 1f) LC0 = %0\n"
+ "1: nop;"
+ :
+ : "a" (15 * 10)
+ : "LC0", "LB0", "LT0"
+ );
+
+ /* Clear System software reset */
+ bfin_write_SWRST(0);
+
+ /* The BF526 ROM will crash during reset */
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+ bfin_read_SWRST();
+#endif
+
+ /* Wait for the SWRST write to complete. Cannot rely on SSYNC
+ * though as the System state is all reset now.
+ */
+ asm(
+ "LSETUP (1f, 1f) LC1 = %0\n"
+ "1: nop;"
+ :
+ : "a" (15 * 1)
+ : "LC1", "LB1", "LT1"
+ );
+ }
+
+ while (1)
+ /* Issue core reset */
+ asm("raise 1");
+}
+
+/* We need to trampoline ourselves up into L1 since our linker
+ * does not have relaxtion support and will only generate a
+ * PC relative call with a 25 bit immediate. This is not enough
+ * to get us from the top of SDRAM into L1.
+ */
+__attribute__ ((__noreturn__))
+static inline void bfin_reset_trampoline(void)
+{
+ if (board_reset)
+ board_reset();
+ while (1)
+ asm("jump (%0);" : : "a" (bfin_reset));
+}
+
+__attribute__ ((__noreturn__))
+void bfin_reset_or_hang(void)
+{
+#ifdef CONFIG_PANIC_HANG
+ hang();
+#else
+ bfin_reset_trampoline();
+#endif
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ bfin_reset_trampoline();
+ return 0;
+}
diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c
new file mode 100644
index 0000000..901cb97
--- /dev/null
+++ b/arch/blackfin/cpu/serial.c
@@ -0,0 +1,193 @@
+/*
+ * U-boot - serial.c Blackfin Serial Driver
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>,
+ * BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com>
+ * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com>
+ * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* Anomaly notes:
+ * 05000086 - we don't support autobaud
+ * 05000099 - we only use DR bit, so losing others is not a problem
+ * 05000100 - we don't use the UART_IIR register
+ * 05000215 - we poll the uart (no dma/interrupts)
+ * 05000225 - no workaround possible, but this shouldnt cause errors ...
+ * 05000230 - we tweak the baud rate calculation slightly
+ * 05000231 - we always use 1 stop bit
+ * 05000309 - we always enable the uart before we modify it in anyway
+ * 05000350 - we always enable the uart regardless of boot mode
+ * 05000363 - we don't support break signals, so don't generate one
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/uart.h>
+
+#ifdef CONFIG_UART_CONSOLE
+
+#include "serial.h"
+
+#ifdef CONFIG_DEBUG_SERIAL
+uint16_t cached_lsr[256];
+uint16_t cached_rbr[256];
+size_t cache_count;
+
+/* The LSR is read-to-clear on some parts, so we have to make sure status
+ * bits aren't inadvertently lost when doing various tests. This also
+ * works around anomaly 05000099 at the same time by keeping a cumulative
+ * tally of all the status bits.
+ */
+static uint16_t uart_lsr_save;
+static uint16_t uart_lsr_read(void)
+{
+ uint16_t lsr = bfin_read16(&pUART->lsr);
+ uart_lsr_save |= (lsr & (OE|PE|FE|BI));
+ return lsr | uart_lsr_save;
+}
+/* Just do the clear for everyone since it can't hurt. */
+static void uart_lsr_clear(void)
+{
+ uart_lsr_save = 0;
+ bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
+}
+#else
+/* When debugging is disabled, we only care about the DR bit, so if other
+ * bits get set/cleared, we don't really care since we don't read them
+ * anyways (and thus anomaly 05000099 is irrelevant).
+ */
+static uint16_t uart_lsr_read(void)
+{
+ return bfin_read16(&pUART->lsr);
+}
+static void uart_lsr_clear(void)
+{
+ bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1);
+}
+#endif
+
+/* Symbol for our assembly to call. */
+void serial_set_baud(uint32_t baud)
+{
+ serial_early_set_baud(baud);
+}
+
+/* Symbol for common u-boot code to call.
+ * Setup the baudrate (brg: baudrate generator).
+ */
+void serial_setbrg(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ serial_set_baud(gd->baudrate);
+}
+
+/* Symbol for our assembly to call. */
+void serial_initialize(void)
+{
+ serial_early_init();
+}
+
+/* Symbol for common u-boot code to call. */
+int serial_init(void)
+{
+ serial_initialize();
+ serial_setbrg();
+ uart_lsr_clear();
+#ifdef CONFIG_DEBUG_SERIAL
+ cache_count = 0;
+ memset(cached_lsr, 0x00, sizeof(cached_lsr));
+ memset(cached_rbr, 0x00, sizeof(cached_rbr));
+#endif
+ return 0;
+}
+
+void serial_putc(const char c)
+{
+ /* send a \r for compatibility */
+ if (c == '\n')
+ serial_putc('\r');
+
+ WATCHDOG_RESET();
+
+ /* wait for the hardware fifo to clear up */
+ while (!(uart_lsr_read() & THRE))
+ continue;
+
+ /* queue the character for transmission */
+ bfin_write16(&pUART->thr, c);
+ SSYNC();
+
+ WATCHDOG_RESET();
+}
+
+int serial_tstc(void)
+{
+ WATCHDOG_RESET();
+ return (uart_lsr_read() & DR) ? 1 : 0;
+}
+
+int serial_getc(void)
+{
+ uint16_t uart_rbr_val;
+
+ /* wait for data ! */
+ while (!serial_tstc())
+ continue;
+
+ /* grab the new byte */
+ uart_rbr_val = bfin_read16(&pUART->rbr);
+
+#ifdef CONFIG_DEBUG_SERIAL
+ /* grab & clear the LSR */
+ uint16_t uart_lsr_val = uart_lsr_read();
+
+ cached_lsr[cache_count] = uart_lsr_val;
+ cached_rbr[cache_count] = uart_rbr_val;
+ cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
+
+ if (uart_lsr_val & (OE|PE|FE|BI)) {
+ uint16_t dll, dlh;
+ printf("\n[SERIAL ERROR]\n");
+ ACCESS_LATCH();
+ dll = bfin_read16(&pUART->dll);
+ dlh = bfin_read16(&pUART->dlh);
+ ACCESS_PORT_IER();
+ printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
+ do {
+ --cache_count;
+ printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count,
+ cached_rbr[cache_count], cached_lsr[cache_count]);
+ } while (cache_count > 0);
+ return -1;
+ }
+#endif
+ uart_lsr_clear();
+
+ return uart_rbr_val;
+}
+
+void serial_puts(const char *s)
+{
+ while (*s)
+ serial_putc(*s++);
+}
+
+#endif
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h
new file mode 100644
index 0000000..5f9be86
--- /dev/null
+++ b/arch/blackfin/cpu/serial.h
@@ -0,0 +1,263 @@
+/*
+ * serial.h - common serial defines for early debug and serial driver.
+ * any functions defined here must be always_inline since
+ * initcode cannot have function calls.
+ *
+ * Copyright (c) 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_CPU_SERIAL_H__
+#define __BFIN_CPU_SERIAL_H__
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/uart.h>
+
+#ifndef CONFIG_UART_CONSOLE
+# define CONFIG_UART_CONSOLE 0
+#endif
+
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+# define BFIN_DEBUG_EARLY_SERIAL 1
+#else
+# define BFIN_DEBUG_EARLY_SERIAL 0
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LOB(x) ((x) & 0xFF)
+#define HIB(x) (((x) >> 8) & 0xFF)
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits. So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct bfin_mmr_serial {
+#ifdef __ADSPBF54x__
+ __BFP(dll);
+ __BFP(dlh);
+ __BFP(gctl);
+ __BFP(lcr);
+ __BFP(mcr);
+ __BFP(lsr);
+ __BFP(msr);
+ __BFP(scr);
+ __BFP(ier_set);
+ __BFP(ier_clear);
+ __BFP(thr);
+ __BFP(rbr);
+#else
+ union {
+ u16 dll;
+ u16 thr;
+ const u16 rbr;
+ };
+ const u16 __spad0;
+ union {
+ u16 dlh;
+ u16 ier;
+ };
+ const u16 __spad1;
+ const __BFP(iir);
+ __BFP(lcr);
+ __BFP(mcr);
+ __BFP(lsr);
+ __BFP(msr);
+ __BFP(scr);
+ const u32 __spad2;
+ __BFP(gctl);
+#endif
+};
+#undef __BFP
+
+#ifndef UART_LSR
+# if (CONFIG_UART_CONSOLE == 3)
+# define UART_BASE UART3_DLL
+# elif (CONFIG_UART_CONSOLE == 2)
+# define UART_BASE UART2_DLL
+# elif (CONFIG_UART_CONSOLE == 1)
+# define UART_BASE UART1_DLL
+# elif (CONFIG_UART_CONSOLE == 0)
+# define UART_BASE UART0_DLL
+# endif
+#else
+# if CONFIG_UART_CONSOLE != 0
+# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
+# endif
+# define UART_BASE UART_DLL
+#endif
+#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE)
+
+#ifdef __ADSPBF54x__
+# define ACCESS_LATCH()
+# define ACCESS_PORT_IER()
+#else
+# define ACCESS_LATCH() \
+ bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB)
+# define ACCESS_PORT_IER() \
+ bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB)
+#endif
+
+__attribute__((always_inline))
+static inline void serial_do_portmux(void)
+{
+#if defined(__ADSPBF51x__)
+# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
+ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \
+ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
+ switch (CONFIG_UART_CONSOLE) {
+ case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */
+ case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */
+ }
+ SSYNC();
+#elif defined(__ADSPBF52x__)
+# define DO_MUX(port, mux, tx, rx) \
+ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \
+ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
+ switch (CONFIG_UART_CONSOLE) {
+ case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */
+ case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */
+ }
+ SSYNC();
+#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
+# define DO_MUX(func, tx, rx) \
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx);
+ switch (CONFIG_UART_CONSOLE) {
+ case 0: DO_MUX(PFDE, 0, 1); break;
+ case 1: DO_MUX(PFTE, 2, 3); break;
+ }
+ SSYNC();
+#elif defined(__ADSPBF54x__)
+# define DO_MUX(port, tx, rx) \
+ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \
+ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
+ switch (CONFIG_UART_CONSOLE) {
+ case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */
+ case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */
+ case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */
+ case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */
+ }
+ SSYNC();
+#endif
+}
+
+__attribute__((always_inline))
+static inline void serial_early_init(void)
+{
+ /* handle portmux crap on different Blackfins */
+ serial_do_portmux();
+
+ /* always enable UART -- avoids anomalies 05000309 and 05000350 */
+ bfin_write16(&pUART->gctl, UCEN);
+
+ /* Set LCR to Word Lengh 8-bit word select */
+ bfin_write16(&pUART->lcr, WLS_8);
+
+ SSYNC();
+}
+
+__attribute__((always_inline))
+static inline void serial_early_put_div(uint16_t divisor)
+{
+ /* Set DLAB in LCR to Access DLL and DLH */
+ ACCESS_LATCH();
+ SSYNC();
+
+ /* Program the divisor to get the baud rate we want */
+ bfin_write16(&pUART->dll, LOB(divisor));
+ bfin_write16(&pUART->dlh, HIB(divisor));
+ SSYNC();
+
+ /* Clear DLAB in LCR to Access THR RBR IER */
+ ACCESS_PORT_IER();
+ SSYNC();
+}
+
+__attribute__((always_inline))
+static inline uint16_t serial_early_get_div(void)
+{
+ /* Set DLAB in LCR to Access DLL and DLH */
+ ACCESS_LATCH();
+ SSYNC();
+
+ uint8_t dll = bfin_read16(&pUART->dll);
+ uint8_t dlh = bfin_read16(&pUART->dlh);
+ uint16_t divisor = (dlh << 8) | dll;
+
+ /* Clear DLAB in LCR to Access THR RBR IER */
+ ACCESS_PORT_IER();
+ SSYNC();
+
+ return divisor;
+}
+
+/* We cannot use get_sclk() early on as it uses caches in external memory */
+#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
+# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
+#endif
+
+__attribute__((always_inline))
+static inline void serial_early_set_baud(uint32_t baud)
+{
+ /* Translate from baud into divisor in terms of SCLK. The
+ * weird multiplication is to make sure we over sample just
+ * a little rather than under sample the incoming signals.
+ */
+ serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
+}
+
+#ifndef BFIN_IN_INITCODE
+__attribute__((always_inline))
+static inline void serial_early_puts(const char *s)
+{
+ if (BFIN_DEBUG_EARLY_SERIAL) {
+ serial_puts("Early: ");
+ serial_puts(s);
+ }
+}
+#endif
+
+#else
+
+.macro serial_early_init
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+ call _serial_initialize;
+#endif
+.endm
+
+.macro serial_early_set_baud
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+ R0.L = LO(CONFIG_BAUDRATE);
+ R0.H = HI(CONFIG_BAUDRATE);
+ call _serial_set_baud;
+#endif
+.endm
+
+/* Since we embed the string right into our .text section, we need
+ * to find its address. We do this by getting our PC and adding 2
+ * bytes (which is the length of the jump instruction). Then we
+ * pass this address to serial_puts().
+ */
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+# define serial_early_puts(str) \
+ call _get_pc; \
+ jump 1f; \
+ .ascii "Early:"; \
+ .ascii __FILE__; \
+ .ascii ": "; \
+ .ascii str; \
+ .asciz "\n"; \
+ .align 4; \
+1: \
+ R0 += 2; \
+ call _serial_puts;
+#else
+# define serial_early_puts(str)
+#endif
+
+#endif
+
+#endif
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
new file mode 100644
index 0000000..7a3abba
--- /dev/null
+++ b/arch/blackfin/cpu/start.S
@@ -0,0 +1,238 @@
+/*
+ * U-boot - start.S Startup file for Blackfin u-boot
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003 Metrowerks/Motorola
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/dma.h>
+#include <asm/mach-common/bits/pll.h>
+
+#include "serial.h"
+
+/* It may seem odd that we make calls to functions even though we haven't
+ * relocated ourselves yet out of {flash,ram,wherever}. This is OK because
+ * the "call" instruction in the Blackfin architecture is actually PC
+ * relative. So we can call functions all we want and not worry about them
+ * not being relocated yet.
+ */
+
+.text
+ENTRY(_start)
+
+ /* Set our initial stack to L1 scratch space */
+ sp.l = LO(L1_SRAM_SCRATCH_END - 20);
+ sp.h = HI(L1_SRAM_SCRATCH_END - 20);
+
+#ifdef CONFIG_HW_WATCHDOG
+# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
+# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
+# endif
+ /* Program the watchdog with an initial timeout of ~5 seconds.
+ * That should be long enough to bootstrap ourselves up and
+ * then the common u-boot code can take over.
+ */
+ P0.L = LO(WDOG_CNT);
+ P0.H = HI(WDOG_CNT);
+ R0.L = 0;
+ R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
+ [P0] = R0;
+ /* fire up the watchdog - R0.L above needs to be 0x0000 */
+ W[P0 + (WDOG_CTL - WDOG_CNT)] = R0;
+#endif
+
+ /* Turn on the serial for debugging the init process */
+ serial_early_init
+ serial_early_set_baud
+
+ serial_early_puts("Init Registers");
+
+ /* Disable self-nested interrupts and enable CYCLES for udelay() */
+ R0 = CCEN | 0x30;
+ SYSCFG = R0;
+
+ /* Zero out registers required by Blackfin ABI.
+ * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
+ */
+ r1 = 0 (x);
+ /* Disable circular buffers */
+ l0 = r1;
+ l1 = r1;
+ l2 = r1;
+ l3 = r1;
+ /* Disable hardware loops in case we were started by 'go' */
+ lc0 = r1;
+ lc1 = r1;
+
+ /* Save RETX so we can pass it while booting Linux */
+ r7 = RETX;
+
+#if CONFIG_MEM_SIZE
+ /* Figure out where we are currently executing so that we can decide
+ * how to best reprogram and relocate things. We'll pass below:
+ * R4: load address of _start
+ * R5: current (not load) address of _start
+ */
+ serial_early_puts("Find ourselves");
+
+ call _get_pc;
+.Loffset:
+ r1.l = .Loffset;
+ r1.h = .Loffset;
+ r4.l = _start;
+ r4.h = _start;
+ r3 = r1 - r4;
+ r5 = r0 - r3;
+
+ /* Inform upper layers if we had to do the relocation ourselves.
+ * This allows us to detect whether we were loaded by 'go 0x1000'
+ * or by the bootrom from an LDR. "R6" is "loaded_from_ldr".
+ */
+ r6 = 1 (x);
+ cc = r4 == r5;
+ if cc jump .Lnorelocate;
+ r6 = 0 (x);
+
+ /* In bypass mode, we don't have an LDR with an init block
+ * so we need to explicitly call it ourselves. This will
+ * reprogram our clocks, memory, and setup our async banks.
+ */
+ serial_early_puts("Program Clocks");
+
+ /* if we're executing >=0x20000000, then we dont need to dma */
+ r3 = 0x0;
+ r3.h = 0x2000;
+ cc = r5 < r3 (iu);
+ if cc jump .Ldma_and_reprogram;
+#else
+ r6 = 1 (x); /* fake loaded_from_ldr = 1 */
+#endif
+ r0 = 0 (x); /* set bootstruct to NULL */
+ call _initcode;
+ jump .Lprogrammed;
+
+ /* we're sitting in external memory, so dma into L1 and reprogram */
+.Ldma_and_reprogram:
+ r0.l = LO(L1_INST_SRAM);
+ r0.h = HI(L1_INST_SRAM);
+ r1.l = __initcode_lma;
+ r1.h = __initcode_lma;
+ r2.l = __initcode_len;
+ r2.h = __initcode_len;
+ r1 = r1 - r4; /* convert r1 from load address of initcode ... */
+ r1 = r1 + r5; /* ... to current (not load) address of initcode */
+ p3 = r0;
+ call _dma_memcpy_nocache;
+ r0 = 0 (x); /* set bootstruct to NULL */
+ call (p3);
+
+ /* Since we reprogrammed SCLK, we need to update the serial divisor */
+.Lprogrammed:
+ serial_early_set_baud
+
+#if CONFIG_MEM_SIZE
+ /* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
+ * monitor location in the end of RAM. We know that memcpy() only
+ * uses registers, so it is safe to call here. Note that this only
+ * copies to external memory ... we do not start executing out of
+ * it yet (see "lower to 15" below).
+ */
+ serial_early_puts("Relocate");
+ r0 = r4;
+ r1 = r5;
+ r2.l = LO(CONFIG_SYS_MONITOR_LEN);
+ r2.h = HI(CONFIG_SYS_MONITOR_LEN);
+ call _memcpy_ASM;
+#endif
+
+ /* Initialize BSS section ... we know that memset() does not
+ * use the BSS, so it is safe to call here. The bootrom LDR
+ * takes care of clearing things for us.
+ */
+ serial_early_puts("Zero BSS");
+ r0.l = __bss_vma;
+ r0.h = __bss_vma;
+ r1 = 0 (x);
+ r2.l = __bss_len;
+ r2.h = __bss_len;
+ call _memset;
+
+.Lnorelocate:
+
+ /* Setup the actual stack in external memory */
+ sp.h = HI(CONFIG_STACKBASE);
+ sp.l = LO(CONFIG_STACKBASE);
+ fp = sp;
+
+ /* Now lower ourselves from the highest interrupt level to
+ * the lowest. We do this by masking all interrupts but 15,
+ * setting the 15 handler to ".Lenable_nested", raising the 15
+ * interrupt, and then returning from the highest interrupt
+ * level to the dummy "jump" until the interrupt controller
+ * services the pending 15 interrupt. If executing out of
+ * flash, these steps also changes the code flow from flash
+ * to external memory.
+ */
+ serial_early_puts("Lower to 15");
+ r0 = r7;
+ r1 = r6;
+ p0.l = LO(EVT15);
+ p0.h = HI(EVT15);
+ p1.l = .Lenable_nested;
+ p1.h = .Lenable_nested;
+ [p0] = p1;
+ r7 = EVT_IVG15 (z);
+ sti r7;
+ raise 15;
+ p4.l = .LWAIT_HERE;
+ p4.h = .LWAIT_HERE;
+ reti = p4;
+ rti;
+
+ /* Enable nested interrupts before continuing with cpu init */
+.Lenable_nested:
+ cli r7;
+ [--sp] = reti;
+ jump.l _cpu_init_f;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+ENDPROC(_start)
+
+LENTRY(_get_pc)
+ r0 = rets;
+#if ANOMALY_05000371
+ NOP;
+ NOP;
+ NOP;
+#endif
+ rts;
+ENDPROC(_get_pc)
diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c
new file mode 100644
index 0000000..caaea94
--- /dev/null
+++ b/arch/blackfin/cpu/traps.c
@@ -0,0 +1,410 @@
+/*
+ * U-boot - traps.c Routines related to interrupts and exceptions
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * This file is based on
+ * No original Copyright holder listed,
+ * Probabily original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 2003 Metrowerks - for Blackfin
+ * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <kgdb.h>
+#include <linux/types.h>
+#include <asm/traps.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/mpu.h>
+#include <asm/mach-common/bits/trace.h>
+#include <asm/deferred.h>
+#include "cpu.h"
+
+#define trace_buffer_save(x) \
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
+
+#define trace_buffer_restore(x) \
+ bfin_write_TBUFCTL((x))
+
+/* The purpose of this map is to provide a mapping of address<->cplb settings
+ * rather than an exact map of what is actually addressable on the part. This
+ * map covers all current Blackfin parts. If you try to access an address that
+ * is in this map but not actually on the part, you won't get an exception and
+ * reboot, you'll get an external hardware addressing error and reboot. Since
+ * only the ends matter (you did something wrong and the board reset), the means
+ * are largely irrelevant.
+ */
+struct memory_map {
+ uint32_t start, end;
+ uint32_t data_flags, inst_flags;
+};
+const struct memory_map const bfin_memory_map[] = {
+ { /* external memory */
+ .start = 0x00000000,
+ .end = 0x20000000,
+ .data_flags = SDRAM_DGENERIC,
+ .inst_flags = SDRAM_IGENERIC,
+ },
+ { /* async banks */
+ .start = 0x20000000,
+ .end = 0x30000000,
+ .data_flags = SDRAM_EBIU,
+ .inst_flags = SDRAM_INON_CHBL,
+ },
+ { /* everything on chip */
+ .start = 0xE0000000,
+ .end = 0xFFFFFFFF,
+ .data_flags = L1_DMEMORY,
+ .inst_flags = L1_IMEMORY,
+ }
+};
+
+#ifdef CONFIG_EXCEPTION_DEFER
+unsigned int deferred_regs[deferred_regs_last];
+#endif
+
+/*
+ * Handle all exceptions while running in EVT3 or EVT5
+ */
+int trap_c(struct pt_regs *regs, uint32_t level)
+{
+ uint32_t ret = 0;
+ uint32_t trapnr = (regs->seqstat & EXCAUSE);
+ bool data = false;
+
+ switch (trapnr) {
+ /* 0x26 - Data CPLB Miss */
+ case VEC_CPLB_M:
+
+ if (ANOMALY_05000261) {
+ static uint32_t last_cplb_fault_retx;
+ /*
+ * Work around an anomaly: if we see a new DCPLB fault,
+ * return without doing anything. Then,
+ * if we get the same fault again, handle it.
+ */
+ if (last_cplb_fault_retx != regs->retx) {
+ last_cplb_fault_retx = regs->retx;
+ return ret;
+ }
+ }
+
+ data = true;
+ /* fall through */
+
+ /* 0x27 - Instruction CPLB Miss */
+ case VEC_CPLB_I_M: {
+ volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA;
+ uint32_t new_cplb_addr = 0, new_cplb_data = 0;
+ static size_t last_evicted;
+ size_t i;
+ unsigned long tflags;
+
+#ifdef CONFIG_EXCEPTION_DEFER
+ /* This should never happen */
+ if (level == 5)
+ bfin_panic(regs);
+#endif
+
+ /*
+ * Keep the trace buffer so that a miss here points people
+ * to the right place (their code). Crashes here rarely
+ * happen. If they do, only the Blackfin maintainer cares.
+ */
+ trace_buffer_save(tflags);
+
+ new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1);
+
+ for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) {
+ /* if the exception is inside this range, lets use it */
+ if (new_cplb_addr >= bfin_memory_map[i].start &&
+ new_cplb_addr < bfin_memory_map[i].end)
+ break;
+ }
+ if (i == ARRAY_SIZE(bfin_memory_map)) {
+ printf("%cCPLB exception outside of memory map at 0x%p\n",
+ (data ? 'D' : 'I'), (void *)new_cplb_addr);
+ bfin_panic(regs);
+ } else
+ debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end);
+ new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags);
+
+ if (data) {
+ CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0;
+ CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0;
+ } else {
+ CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0;
+ CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0;
+ }
+
+ /* find the next unlocked entry and evict it */
+ i = last_evicted & 0xF;
+ debug("last evicted = %i\n", i);
+ CPLB_DATA = CPLB_DATA_BASE + i;
+ while (*CPLB_DATA & CPLB_LOCK) {
+ debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA);
+ i = (i + 1) & 0xF; /* wrap around */
+ CPLB_DATA = CPLB_DATA_BASE + i;
+ }
+ CPLB_ADDR = CPLB_ADDR_BASE + i;
+
+ debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA);
+ last_evicted = i + 1;
+
+ /* need to turn off cplbs whenever we muck with the cplb table */
+#if ENDCPLB != ENICPLB
+# error cplb enable bit violates my sanity
+#endif
+ uint32_t mem_control = (data ? DMEM_CONTROL : IMEM_CONTROL);
+ bfin_write32(mem_control, bfin_read32(mem_control) & ~ENDCPLB);
+ *CPLB_ADDR = new_cplb_addr;
+ *CPLB_DATA = new_cplb_data;
+ bfin_write32(mem_control, bfin_read32(mem_control) | ENDCPLB);
+ SSYNC();
+
+ /* dump current table for debugging purposes */
+ CPLB_ADDR = CPLB_ADDR_BASE;
+ CPLB_DATA = CPLB_DATA_BASE;
+ for (i = 0; i < 16; ++i)
+ debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++);
+
+ trace_buffer_restore(tflags);
+ break;
+ }
+#ifdef CONFIG_CMD_KGDB
+ /* Single step
+ * if we are in IRQ5, just ignore, otherwise defer, and handle it in kgdb
+ */
+ case VEC_STEP:
+ if (level == 3) {
+ /* If we just returned from an interrupt, the single step
+ * event is for the RTI instruction.
+ */
+ if (regs->retx == regs->pc)
+ break;
+ /* we just return if we are single stepping through IRQ5 */
+ if (regs->ipend & 0x20)
+ break;
+ /* Otherwise, turn single stepping off & fall through,
+ * which defers to IRQ5
+ */
+ regs->syscfg &= ~1;
+ }
+ /* fall through */
+#endif
+ default:
+#ifdef CONFIG_CMD_KGDB
+ if (level == 3) {
+ /* We need to handle this at EVT5, so try again */
+ ret = 1;
+ break;
+ }
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return 0;
+#endif
+ bfin_panic(regs);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_DEBUG_DUMP
+# define ENABLE_DUMP 1
+#else
+# define ENABLE_DUMP 0
+#endif
+
+#ifndef CONFIG_KALLSYMS
+const char *symbol_lookup(unsigned long addr, unsigned long *caddr)
+{
+ *caddr = addr;
+ return "N/A";
+}
+#endif
+
+static void decode_address(char *buf, unsigned long address)
+{
+ unsigned long sym_addr;
+ void *paddr = (void *)address;
+ const char *sym = symbol_lookup(address, &sym_addr);
+
+ if (sym) {
+ sprintf(buf, "<0x%p> { %s + 0x%lx }", paddr, sym, address - sym_addr);
+ return;
+ }
+
+ if (!address)
+ sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr);
+ else if (address >= CONFIG_SYS_MONITOR_BASE &&
+ address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+ sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr);
+ else
+ sprintf(buf, "<0x%p> /* unknown address */", paddr);
+}
+
+static char *strhwerrcause(uint16_t hwerrcause)
+{
+ switch (hwerrcause) {
+ case 0x02: return "system mmr error";
+ case 0x03: return "external memory addressing error";
+ case 0x12: return "performance monitor overflow";
+ case 0x18: return "raise 5 instruction";
+ default: return "undef";
+ }
+}
+
+static char *strexcause(uint16_t excause)
+{
+ switch (excause) {
+ case 0x00 ... 0xf: return "custom exception";
+ case 0x10: return "single step";
+ case 0x11: return "trace buffer full";
+ case 0x21: return "undef inst";
+ case 0x22: return "illegal inst";
+ case 0x23: return "dcplb prot violation";
+ case 0x24: return "misaligned data";
+ case 0x25: return "unrecoverable event";
+ case 0x26: return "dcplb miss";
+ case 0x27: return "multiple dcplb hit";
+ case 0x28: return "emulation watchpoint";
+ case 0x2a: return "misaligned inst";
+ case 0x2b: return "icplb prot violation";
+ case 0x2c: return "icplb miss";
+ case 0x2d: return "multiple icplb hit";
+ case 0x2e: return "illegal use of supervisor resource";
+ default: return "undef";
+ }
+}
+
+void dump(struct pt_regs *fp)
+{
+ char buf[150];
+ int i;
+ uint16_t hwerrcause, excause;
+
+ if (!ENABLE_DUMP)
+ return;
+
+#ifndef CONFIG_CMD_KGDB
+ /* fp->ipend is normally garbage, so load it ourself */
+ fp->ipend = bfin_read_IPEND();
+#endif
+
+ hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P;
+ excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P;
+
+ printf("SEQUENCER STATUS:\n");
+ printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
+ fp->seqstat, fp->ipend, fp->syscfg);
+ printf(" HWERRCAUSE: 0x%x: %s\n", hwerrcause, strhwerrcause(hwerrcause));
+ printf(" EXCAUSE : 0x%x: %s\n", excause, strexcause(excause));
+ for (i = 6; i <= 15; ++i) {
+ if (fp->ipend & (1 << i)) {
+ decode_address(buf, bfin_read32(EVT0 + 4*i));
+ printf(" physical IVG%i asserted : %s\n", i, buf);
+ }
+ }
+ decode_address(buf, fp->rete);
+ printf(" RETE: %s\n", buf);
+ decode_address(buf, fp->retn);
+ printf(" RETN: %s\n", buf);
+ decode_address(buf, fp->retx);
+ printf(" RETX: %s\n", buf);
+ decode_address(buf, fp->rets);
+ printf(" RETS: %s\n", buf);
+ /* we lie and store RETI in "pc" */
+ decode_address(buf, fp->pc);
+ printf(" RETI: %s\n", buf);
+
+ if (fp->seqstat & EXCAUSE) {
+ decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
+ printf("DCPLB_FAULT_ADDR: %s\n", buf);
+ decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
+ printf("ICPLB_FAULT_ADDR: %s\n", buf);
+ }
+
+ printf("\nPROCESSOR STATE:\n");
+ printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
+ fp->r0, fp->r1, fp->r2, fp->r3);
+ printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
+ fp->p0, fp->p1, fp->p2, fp->p3);
+ printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
+ fp->p4, fp->p5, fp->fp, (unsigned long)fp);
+ printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n",
+ fp->lb0, fp->lt0, fp->lc0);
+ printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n",
+ fp->lb1, fp->lt1, fp->lc1);
+ printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
+ fp->b0, fp->l0, fp->m0, fp->i0);
+ printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
+ fp->b1, fp->l1, fp->m1, fp->i1);
+ printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
+ fp->b2, fp->l2, fp->m2, fp->i2);
+ printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
+ fp->b3, fp->l3, fp->m3, fp->i3);
+ printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+ printf("USP : %08lx ASTAT: %08lx\n",
+ fp->usp, fp->astat);
+
+ printf("\n");
+}
+
+void dump_bfin_trace_buffer(void)
+{
+ char buf[150];
+ unsigned long tflags;
+ int i = 0;
+
+ if (!ENABLE_DUMP)
+ return;
+
+ trace_buffer_save(tflags);
+
+ printf("Hardware Trace:\n");
+
+ if (bfin_read_TBUFSTAT() & TBUFCNT) {
+ for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ decode_address(buf, bfin_read_TBUF());
+ printf("%4i Target : %s\n", i, buf);
+ decode_address(buf, bfin_read_TBUF());
+ printf(" Source : %s\n", buf);
+ }
+ }
+
+ trace_buffer_restore(tflags);
+}
+
+void bfin_panic(struct pt_regs *regs)
+{
+ if (ENABLE_DUMP) {
+ unsigned long tflags;
+ trace_buffer_save(tflags);
+ }
+
+ puts(
+ "\n"
+ "\n"
+ "\n"
+ "Ack! Something bad happened to the Blackfin!\n"
+ "\n"
+ );
+ dump(regs);
+ dump_bfin_trace_buffer();
+ puts("\n");
+ bfin_reset_or_hang();
+}
diff --git a/arch/blackfin/cpu/watchdog.c b/arch/blackfin/cpu/watchdog.c
new file mode 100644
index 0000000..1886bda
--- /dev/null
+++ b/arch/blackfin/cpu/watchdog.c
@@ -0,0 +1,23 @@
+/*
+ * watchdog.c - driver for Blackfin on-chip watchdog
+ *
+ * Copyright (c) 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/blackfin.h>
+
+void hw_watchdog_reset(void)
+{
+ bfin_write_WDOG_STAT(0);
+}
+
+void hw_watchdog_init(void)
+{
+ bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */
+ hw_watchdog_reset();
+ bfin_write_WDOG_CTL(0x0);
+}
diff --git a/arch/blackfin/lib/u-boot.lds.S b/arch/blackfin/lib/u-boot.lds.S
index 2b23d8b..9163d20 100644
--- a/arch/blackfin/lib/u-boot.lds.S
+++ b/arch/blackfin/lib/u-boot.lds.S
@@ -73,14 +73,14 @@
{
.text.pre :
{
- cpu/blackfin/start.o (.text .text.*)
+ arch/blackfin/cpu/start.o (.text .text.*)
LDS_BOARD_TEXT
} >ram_code
.text.init :
{
- cpu/blackfin/initcode.o (.text .text.*)
+ arch/blackfin/cpu/initcode.o (.text .text.*)
} >ram_code
__initcode_lma = LOADADDR(.text.init);
__initcode_len = SIZEOF(.text.init);