board: dragonboard410c: upstream DT compat
Use the root compatible strings from upstream Linux, add missing
'#clock-cells' property to the gcc node.
Adjust some of the msm8916/apq8016 drivers to use the correct upstream
compatible properties and DT bindings.
This prepares us to switch to upstream DT in a future patch.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c b/board/qualcomm/dragonboard410c/dragonboard410c.c
index 350e0e9..1adac07 100644
--- a/board/qualcomm/dragonboard410c/dragonboard410c.c
+++ b/board/qualcomm/dragonboard410c/dragonboard410c.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
+#include <dm/pinctrl.h>
#include <env.h>
#include <init.h>
#include <net.h>
@@ -23,84 +24,32 @@
DECLARE_GLOBAL_DATA_PTR;
-int dram_init(void)
-{
- gd->ram_size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
+#define USB_HUB_RESET_GPIO 2
+#define USB_SW_SELECT_GPIO 3
int board_usb_init(int index, enum usb_init_type init)
{
- static struct udevice *pmic_gpio;
- static struct gpio_desc hub_reset, usb_sel;
- int ret = 0, node;
+ struct udevice *usb;
+ int ret = 0;
- if (!pmic_gpio) {
- ret = uclass_get_device_by_name(UCLASS_GPIO,
- "pm8916_gpios@c000",
- &pmic_gpio);
- if (ret < 0) {
- printf("Failed to find pm8916_gpios@c000 node.\n");
- return ret;
- }
+ /* USB device */
+ ret = device_find_global_by_ofnode(ofnode_path("/soc/usb"), &usb);
+ if (ret) {
+ printf("Cannot find USB device\n");
+ return ret;
}
- /* Try to request gpios needed to start usb host on dragonboard */
- if (!dm_gpio_is_valid(&hub_reset)) {
- node = fdt_subnode_offset(gd->fdt_blob,
- dev_of_offset(pmic_gpio),
- "usb_hub_reset_pm");
- if (node < 0) {
- printf("Failed to find usb_hub_reset_pm dt node.\n");
- return node;
- }
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
- "gpios", 0, &hub_reset, 0);
- if (ret < 0) {
- printf("Failed to request usb_hub_reset_pm gpio.\n");
- return ret;
- }
- }
-
- if (!dm_gpio_is_valid(&usb_sel)) {
- node = fdt_subnode_offset(gd->fdt_blob,
- dev_of_offset(pmic_gpio),
- "usb_sw_sel_pm");
- if (node < 0) {
- printf("Failed to find usb_sw_sel_pm dt node.\n");
- return 0;
- }
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
- "gpios", 0, &usb_sel, 0);
- if (ret < 0) {
- printf("Failed to request usb_sw_sel_pm gpio.\n");
- return ret;
- }
- }
-
- if (init == USB_INIT_HOST) {
- /* Start USB Hub */
- dm_gpio_set_dir_flags(&hub_reset,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- mdelay(100);
- /* Switch usb to host connectors */
- dm_gpio_set_dir_flags(&usb_sel,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- mdelay(100);
- } else { /* Device */
- /* Disable hub */
- dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT);
- /* Switch back to device connector */
- dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT);
+ /* Select "default" or "device" pinctrl */
+ switch (init) {
+ case USB_INIT_HOST:
+ pinctrl_select_state(usb, "default");
+ break;
+ case USB_INIT_DEVICE:
+ pinctrl_select_state(usb, "device");
+ break;
+ default:
+ debug("Unknown usb_init_type %d\n", init);
+ break;
}
return 0;