[ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA
Changes:
- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
DV_EVM. Can't check if it works on SONATA, don't have a board any more,
but it at least compiles.
Here is an excerpt from session log on SCHMOOGIE...
U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
DRAM: 128 MB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
new file mode 100644
index 0000000..6eeb6e5
--- /dev/null
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -0,0 +1,142 @@
+/*
+ * Intel LXT971/LXT972 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <lxt971a.h>
+#include <asm/arch/emac_defs.h>
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+int lxt972_is_phy_connected(int phy_addr)
+{
+ u_int16_t id1, id2;
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1))
+ return(0);
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2))
+ return(0);
+
+ if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
+ return(1);
+
+ return(0);
+}
+
+int lxt972_get_link_speed(int phy_addr)
+{
+ u_int16_t stat1, tmp;
+ volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+ return(0);
+
+ if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
+ return(0);
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ return(0);
+
+ tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
+
+ dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+ /* Read back */
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ return(0);
+
+
+ /* Speed doesn't matter, there is no setting for it in EMAC... */
+ if (stat1 & PHY_LXT971_STAT2_100BTX) {
+ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ } else {
+ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ }
+
+ return(0);
+}
+
+
+int lxt972_init_phy(int phy_addr)
+{
+ int ret = 1;
+
+ if (!lxt972_get_link_speed(phy_addr)) {
+ /* Try another time */
+ ret = lxt972_get_link_speed(phy_addr);
+ }
+
+ /* Disable PHY Interrupts */
+ dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+
+ return(ret);
+}
+
+
+int lxt972_auto_negotiate(int phy_addr)
+{
+ u_int16_t tmp;
+
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp))
+ return(0);
+
+ /* Restart Auto_negotiation */
+ tmp |= PHY_COMMON_CTRL_RES_AUTO;
+ dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp);
+
+ /*check AutoNegotiate complete */
+ udelay (10000);
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp))
+ return(0);
+
+ if (!(tmp & PHY_COMMON_STAT_AN_COMP))
+ return(0);
+
+ return (lxt972_get_link_speed(phy_addr));
+}
+
+#endif /* CONFIG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_ETHER */