MSCC: Add board support for Jaguar2 SOC family
Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index b61afe6..1484db9 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -19,6 +19,7 @@
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
+dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb
targets += $(dtb-y)
diff --git a/arch/mips/mach-mscc/Makefile b/arch/mips/mach-mscc/Makefile
index 44538b7..f5b6968 100644
--- a/arch/mips/mach-mscc/Makefile
+++ b/arch/mips/mach-mscc/Makefile
@@ -2,5 +2,6 @@
CFLAGS_cpu.o += -finline-limit=64000
-obj-y += cpu.o dram.o reset.o phy.o gpio.o lowlevel_init.o
-obj-$(CONFIG_SOC_LUTON) += lowlevel_init_luton.o
+obj-y += cpu.o dram.o reset.o phy.o lowlevel_init.o
+obj-$(CONFIG_SOC_LUTON) += lowlevel_init_luton.o gpio.o
+obj-$(CONFIG_SOC_OCELOT) += gpio.o