| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> |
| * |
| */ |
| |
| #include "armv7-m.dtsi" |
| #include <dt-bindings/clock/stm32fx-clock.h> |
| #include <dt-bindings/mfd/stm32f7-rcc.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| clocks { |
| clk_hse: clk-hse { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| clk-lse { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| clk-lsi { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| }; |
| |
| clk_i2s_ckin: clk-i2s-ckin { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| soc { |
| timers2: timers@40000000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000000 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@1 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers3: timers@40000400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000400 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@2 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers4: timers@40000800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000800 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@3 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers5: timers@40000c00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000C00 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@4 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers6: timers@40001000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001000 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| timer@5 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <5>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers7: timers@40001400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001400 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| timer@6 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers12: timers@40001800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001800 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@11 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <11>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers13: timers@40001c00 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001C00 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers14: timers@40002000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40002000 0x400>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| rtc: rtc@40002800 { |
| compatible = "st,stm32-rtc"; |
| reg = <0x40002800 0x400>; |
| clocks = <&rcc 1 CLK_RTC>; |
| assigned-clocks = <&rcc 1 CLK_RTC>; |
| assigned-clock-parents = <&rcc 1 CLK_LSE>; |
| interrupt-parent = <&exti>; |
| interrupts = <17 1>; |
| st,syscfg = <&pwrcfg 0x00 0x100>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@40004400 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40004400 0x400>; |
| interrupts = <38>; |
| clocks = <&rcc 1 CLK_USART2>; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40004800 0x400>; |
| interrupts = <39>; |
| clocks = <&rcc 1 CLK_USART3>; |
| status = "disabled"; |
| }; |
| |
| usart4: serial@40004c00 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40004c00 0x400>; |
| interrupts = <52>; |
| clocks = <&rcc 1 CLK_UART4>; |
| status = "disabled"; |
| }; |
| |
| usart5: serial@40005000 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40005000 0x400>; |
| interrupts = <53>; |
| clocks = <&rcc 1 CLK_UART5>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40005400 { |
| compatible = "st,stm32f7-i2c"; |
| reg = <0x40005400 0x400>; |
| interrupts = <31>, |
| <32>; |
| resets = <&rcc STM32F7_APB1_RESET(I2C1)>; |
| clocks = <&rcc 1 CLK_I2C1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@40005800 { |
| compatible = "st,stm32f7-i2c"; |
| reg = <0x40005800 0x400>; |
| interrupts = <33>, |
| <34>; |
| resets = <&rcc STM32F7_APB1_RESET(I2C2)>; |
| clocks = <&rcc 1 CLK_I2C2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@40005c00 { |
| compatible = "st,stm32f7-i2c"; |
| reg = <0x40005c00 0x400>; |
| interrupts = <72>, |
| <73>; |
| resets = <&rcc STM32F7_APB1_RESET(I2C3)>; |
| clocks = <&rcc 1 CLK_I2C3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@40006000 { |
| compatible = "st,stm32f7-i2c"; |
| reg = <0x40006000 0x400>; |
| interrupts = <95>, |
| <96>; |
| resets = <&rcc STM32F7_APB1_RESET(I2C4)>; |
| clocks = <&rcc 1 CLK_I2C4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| cec: cec@40006c00 { |
| compatible = "st,stm32-cec"; |
| reg = <0x40006C00 0x400>; |
| interrupts = <94>; |
| clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>; |
| clock-names = "cec", "hdmi-cec"; |
| status = "disabled"; |
| }; |
| |
| usart7: serial@40007800 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40007800 0x400>; |
| interrupts = <82>; |
| clocks = <&rcc 1 CLK_UART7>; |
| status = "disabled"; |
| }; |
| |
| usart8: serial@40007c00 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40007c00 0x400>; |
| interrupts = <83>; |
| clocks = <&rcc 1 CLK_UART8>; |
| status = "disabled"; |
| }; |
| |
| timers1: timers@40010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40010000 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@0 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers8: timers@40010400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40010400 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@7 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <7>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usart1: serial@40011000 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40011000 0x400>; |
| interrupts = <37>; |
| clocks = <&rcc 1 CLK_USART1>; |
| status = "disabled"; |
| }; |
| |
| usart6: serial@40011400 { |
| compatible = "st,stm32f7-uart"; |
| reg = <0x40011400 0x400>; |
| interrupts = <71>; |
| clocks = <&rcc 1 CLK_USART6>; |
| status = "disabled"; |
| }; |
| |
| sdio2: mmc@40011c00 { |
| compatible = "arm,pl180", "arm,primecell"; |
| arm,primecell-periphid = <0x00880180>; |
| reg = <0x40011c00 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>; |
| clock-names = "apb_pclk"; |
| interrupts = <103>; |
| max-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| |
| sdio1: mmc@40012c00 { |
| compatible = "arm,pl180", "arm,primecell"; |
| arm,primecell-periphid = <0x00880180>; |
| reg = <0x40012c00 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>; |
| clock-names = "apb_pclk"; |
| interrupts = <49>; |
| max-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| |
| syscfg: syscon@40013800 { |
| compatible = "st,stm32-syscfg", "syscon"; |
| reg = <0x40013800 0x400>; |
| }; |
| |
| exti: interrupt-controller@40013c00 { |
| compatible = "st,stm32-exti"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x40013C00 0x400>; |
| interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; |
| }; |
| |
| timers9: timers@40014000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40014000 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@8 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <8>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers10: timers@40014400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014400 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers11: timers@40014800 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014800 0x400>; |
| clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwrcfg: power-config@40007000 { |
| compatible = "st,stm32-power-config", "syscon"; |
| reg = <0x40007000 0x400>; |
| }; |
| |
| crc: crc@40023000 { |
| compatible = "st,stm32f7-crc"; |
| reg = <0x40023000 0x400>; |
| clocks = <&rcc 0 12>; |
| status = "disabled"; |
| }; |
| |
| rcc: rcc@40023800 { |
| #reset-cells = <1>; |
| #clock-cells = <2>; |
| compatible = "st,stm32f746-rcc", "st,stm32-rcc"; |
| reg = <0x40023800 0x400>; |
| clocks = <&clk_hse>, <&clk_i2s_ckin>; |
| st,syscfg = <&pwrcfg>; |
| assigned-clocks = <&rcc 1 CLK_HSE_RTC>; |
| assigned-clock-rates = <1000000>; |
| }; |
| |
| dma1: dma-controller@40026000 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026000 0x400>; |
| interrupts = <11>, |
| <12>, |
| <13>, |
| <14>, |
| <15>, |
| <16>, |
| <17>, |
| <47>; |
| clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>; |
| #dma-cells = <4>; |
| status = "disabled"; |
| }; |
| |
| dma2: dma-controller@40026400 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026400 0x400>; |
| interrupts = <56>, |
| <57>, |
| <58>, |
| <59>, |
| <60>, |
| <68>, |
| <69>, |
| <70>; |
| clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>; |
| #dma-cells = <4>; |
| st,mem2mem; |
| status = "disabled"; |
| }; |
| |
| usbotg_hs: usb@40040000 { |
| compatible = "st,stm32f7-hsotg"; |
| reg = <0x40040000 0x40000>; |
| interrupts = <77>; |
| clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>; |
| clock-names = "otg"; |
| g-rx-fifo-size = <256>; |
| g-np-tx-fifo-size = <32>; |
| g-tx-fifo-size = <128 128 64 64 64 64 32 32>; |
| status = "disabled"; |
| }; |
| |
| usbotg_fs: usb@50000000 { |
| compatible = "st,stm32f4x9-fsotg"; |
| reg = <0x50000000 0x40000>; |
| interrupts = <67>; |
| clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>; |
| clock-names = "otg"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &systick { |
| clocks = <&rcc 1 0>; |
| status = "okay"; |
| }; |