85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
be used for configuring the PCI ATMU.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/sbc8560/init.S b/board/sbc8560/init.S
index e149fbd..3baa506 100644
--- a/board/sbc8560/init.S
+++ b/board/sbc8560/init.S
@@ -103,8 +103,8 @@
.long FSL_BOOKE_MAS0(1,7,0)
.long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI_MEM_BASE,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_MEM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+ .long FSL_BOOKE_MAS2(CFG_PCI_MEM_PHYS,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_MEM_PHYS,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
.long FSL_BOOKE_MAS0(1,15,0)
diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c
index d1c6dc2..e370853 100644
--- a/board/sbc8560/law.c
+++ b/board/sbc8560/law.c
@@ -53,7 +53,7 @@
#ifndef CONFIG_SPD_EEPROM
SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
};