fdtdec: Implement fdtdec_add_reserved_memory()
This function can be used to add subnodes in the /reserved-memory node.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
new file mode 100644
index 0000000..bac4afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -0,0 +1,136 @@
+*** Reserved memory regions ***
+
+Reserved memory is specified as a node under the /reserved-memory node.
+The operating system shall exclude reserved memory from normal usage
+one can create child nodes describing particular reserved (excluded from
+normal use) memory regions. Such memory regions are usually designed for
+the special usage by various device drivers.
+
+Parameters for each memory region can be encoded into the device tree
+with the following nodes:
+
+/reserved-memory node
+---------------------
+#address-cells, #size-cells (required) - standard definition
+ - Should use the same values as the root node
+ranges (required) - standard definition
+ - Should be empty
+
+/reserved-memory/ child nodes
+-----------------------------
+Each child of the reserved-memory node specifies one or more regions of
+reserved memory. Each child node may either use a 'reg' property to
+specify a specific range of reserved memory, or a 'size' property with
+optional constraints to request a dynamically allocated block of memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
+address (@<address>) should be appended to the name if the node is a
+static allocation.
+
+Properties:
+Requires either a) or b) below.
+a) static allocation
+ reg (required) - standard definition
+b) dynamic allocation
+ size (required) - length based on parent's #size-cells
+ - Size in bytes of memory to reserve.
+ alignment (optional) - length based on parent's #size-cells
+ - Address boundary for alignment of allocation.
+ alloc-ranges (optional) - prop-encoded-array (address, length pairs).
+ - Specifies regions of memory that are
+ acceptable to allocate from.
+
+If both reg and size are present, then the reg property takes precedence
+and size is ignored.
+
+Additional properties:
+compatible (optional) - standard definition
+ - may contain the following strings:
+ - shared-dma-pool: This indicates a region of memory meant to be
+ used as a shared pool of DMA buffers for a set of devices. It can
+ be used by an operating system to instantiate the necessary pool
+ management subsystem if necessary.
+ - vendor specific string in the form <vendor>,[<device>-]<usage>
+no-map (optional) - empty property
+ - Indicates the operating system must not create a virtual mapping
+ of the region as part of its standard mapping of system memory,
+ nor permit speculative access to it under any circumstances other
+ than under the control of the device driver using the region.
+reusable (optional) - empty property
+ - The operating system can use the memory in this region with the
+ limitation that the device driver(s) owning the region need to be
+ able to reclaim it back. Typically that means that the operating
+ system can use that region to store volatile or cached data that
+ can be otherwise regenerated or migrated elsewhere.
+
+Linux implementation note:
+- If a "linux,cma-default" property is present, then Linux will use the
+ region for the default pool of the contiguous memory allocator.
+
+- If a "linux,dma-default" property is present, then Linux will use the
+ region for the default pool of the consistent DMA allocator.
+
+Device node references to reserved memory
+-----------------------------------------
+Regions in the /reserved-memory node may be referenced by other device
+nodes by adding a memory-region property to the device node.
+
+memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
+
+Example
+-------
+This example defines 3 contiguous regions are defined for Linux kernel:
+one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
+one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
+one for multimedia processing (named multimedia-memory@77000000, 64MiB).
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x4000000>;
+ alignment = <0x2000>;
+ linux,cma-default;
+ };
+
+ display_reserved: framebuffer@78000000 {
+ reg = <0x78000000 0x800000>;
+ };
+
+ multimedia_reserved: multimedia@77000000 {
+ compatible = "acme,multimedia-memory";
+ reg = <0x77000000 0x4000000>;
+ };
+ };
+
+ /* ... */
+
+ fb0: video@12300000 {
+ memory-region = <&display_reserved>;
+ /* ... */
+ };
+
+ scaler: scaler@12500000 {
+ memory-region = <&multimedia_reserved>;
+ /* ... */
+ };
+
+ codec: codec@12600000 {
+ memory-region = <&multimedia_reserved>;
+ /* ... */
+ };
+};
diff --git a/include/fdtdec.h b/include/fdtdec.h
index ba7f873..9bd6a70 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -1032,6 +1032,54 @@
int fdtdec_set_phandle(void *blob, int node, uint32_t phandle);
/**
+ * fdtdec_add_reserved_memory() - add or find a reserved-memory node
+ *
+ * If a reserved-memory node already exists for the given carveout, a phandle
+ * for that node will be returned. Otherwise a new node will be created and a
+ * phandle corresponding to it will be returned.
+ *
+ * See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+ * for details on how to use reserved memory regions.
+ *
+ * As an example, consider the following code snippet:
+ *
+ * struct fdt_memory fb = {
+ * .start = 0x92cb3000,
+ * .end = 0x934b2fff,
+ * };
+ * uint32_t phandle;
+ *
+ * fdtdec_add_reserved_memory(fdt, "framebuffer", &fb, &phandle);
+ *
+ * This results in the following subnode being added to the top-level
+ * /reserved-memory node:
+ *
+ * reserved-memory {
+ * #address-cells = <0x00000002>;
+ * #size-cells = <0x00000002>;
+ * ranges;
+ *
+ * framebuffer@92cb3000 {
+ * reg = <0x00000000 0x92cb3000 0x00000000 0x00800000>;
+ * phandle = <0x0000004d>;
+ * };
+ * };
+ *
+ * If the top-level /reserved-memory node does not exist, it will be created.
+ * The phandle returned from the function call can be used to reference this
+ * reserved memory region from other nodes.
+ *
+ * @param blob FDT blob
+ * @param basename base name of the node to create
+ * @param carveout information about the carveout region
+ * @param phandlep return location for the phandle of the carveout region
+ * @return 0 on success or a negative error code on failure
+ */
+int fdtdec_add_reserved_memory(void *blob, const char *basename,
+ const struct fdt_memory *carveout,
+ uint32_t *phandlep);
+
+/**
* Set up the device tree ready for use
*/
int fdtdec_setup(void);
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 079a9b1..d247141 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1268,6 +1268,137 @@
return fdt_setprop(blob, node, "phandle", &value, sizeof(value));
}
+static int fdtdec_init_reserved_memory(void *blob)
+{
+ int na, ns, node, err;
+ fdt32_t value;
+
+ /* inherit #address-cells and #size-cells from the root node */
+ na = fdt_address_cells(blob, 0);
+ ns = fdt_size_cells(blob, 0);
+
+ node = fdt_add_subnode(blob, 0, "reserved-memory");
+ if (node < 0)
+ return node;
+
+ err = fdt_setprop(blob, node, "ranges", NULL, 0);
+ if (err < 0)
+ return err;
+
+ value = cpu_to_fdt32(ns);
+
+ err = fdt_setprop(blob, node, "#size-cells", &value, sizeof(value));
+ if (err < 0)
+ return err;
+
+ value = cpu_to_fdt32(na);
+
+ err = fdt_setprop(blob, node, "#address-cells", &value, sizeof(value));
+ if (err < 0)
+ return err;
+
+ return node;
+}
+
+int fdtdec_add_reserved_memory(void *blob, const char *basename,
+ const struct fdt_memory *carveout,
+ uint32_t *phandlep)
+{
+ fdt32_t cells[4] = {}, *ptr = cells;
+ uint32_t upper, lower, phandle;
+ int parent, node, na, ns, err;
+ char name[64];
+
+ /* create an empty /reserved-memory node if one doesn't exist */
+ parent = fdt_path_offset(blob, "/reserved-memory");
+ if (parent < 0) {
+ parent = fdtdec_init_reserved_memory(blob);
+ if (parent < 0)
+ return parent;
+ }
+
+ /* only 1 or 2 #address-cells and #size-cells are supported */
+ na = fdt_address_cells(blob, parent);
+ if (na < 1 || na > 2)
+ return -FDT_ERR_BADNCELLS;
+
+ ns = fdt_size_cells(blob, parent);
+ if (ns < 1 || ns > 2)
+ return -FDT_ERR_BADNCELLS;
+
+ /* find a matching node and return the phandle to that */
+ fdt_for_each_subnode(node, blob, parent) {
+ const char *name = fdt_get_name(blob, node, NULL);
+ phys_addr_t addr, size;
+
+ addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("failed to read address/size for %s\n", name);
+ continue;
+ }
+
+ if (addr == carveout->start && (addr + size) == carveout->end) {
+ *phandlep = fdt_get_phandle(blob, node);
+ return 0;
+ }
+ }
+
+ /*
+ * Unpack the start address and generate the name of the new node
+ * base on the basename and the unit-address.
+ */
+ lower = fdt_addr_unpack(carveout->start, &upper);
+
+ if (na > 1 && upper > 0)
+ snprintf(name, sizeof(name), "%s@%x,%x", basename, upper,
+ lower);
+ else {
+ if (upper > 0) {
+ debug("address %08x:%08x exceeds addressable space\n",
+ upper, lower);
+ return -FDT_ERR_BADVALUE;
+ }
+
+ snprintf(name, sizeof(name), "%s@%x", basename, lower);
+ }
+
+ node = fdt_add_subnode(blob, parent, name);
+ if (node < 0)
+ return node;
+
+ err = fdt_generate_phandle(blob, &phandle);
+ if (err < 0)
+ return err;
+
+ err = fdtdec_set_phandle(blob, node, phandle);
+ if (err < 0)
+ return err;
+
+ /* store one or two address cells */
+ if (na > 1)
+ *ptr++ = cpu_to_fdt32(upper);
+
+ *ptr++ = cpu_to_fdt32(lower);
+
+ /* store one or two size cells */
+ lower = fdt_size_unpack(carveout->end - carveout->start + 1, &upper);
+
+ if (ns > 1)
+ *ptr++ = cpu_to_fdt32(upper);
+
+ *ptr++ = cpu_to_fdt32(lower);
+
+ err = fdt_setprop(blob, node, "reg", cells, (na + ns) * sizeof(*cells));
+ if (err < 0)
+ return err;
+
+ /* return the phandle for the new node for the caller to use */
+ if (phandlep)
+ *phandlep = phandle;
+
+ return 0;
+}
+
int fdtdec_setup(void)
{
#if CONFIG_IS_ENABLED(OF_CONTROL)