odroid: enable driver model pmic/regulator API and MAX77686 drivers
This change enables the configs required to init and setup max77686
regulator driver, using the new driver model pmic and regulator API.
And also changes the old pmic framework calls to the new ones.
This commits enables:
- CONFIG_ERRNO_STR
- CONFIG_DM_PMIC
- CONFIG_DM_PMIC_CMD
- CONFIG_DM_PMIC_MAX77686
- CONFIG_DM_REGULATOR
- CONFIG_DM_REGULATOR_CMD
- CONFIG_DM_REGULATOR_MAX77686
And removes the unused:
- CONFIG_DM_I2C_COMPAT
- CONFIG_POWER
- CONFIG_POWER_I2C
- CONFIG_POWER_MAX77686
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index ae41c29..29de325 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -12,7 +12,9 @@
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
#include <asm/arch/cpu.h>
+#include <dm.h>
#include <power/pmic.h>
+#include <power/regulator.h>
#include <power/max77686_pmic.h>
#include <errno.h>
#include <mmc.h>
@@ -31,6 +33,12 @@
ODROID_TYPES,
};
+static const char *mmc_regulators[] = {
+ "VDDQ_EMMC_1.8V",
+ "VDDQ_EMMC_2.8V",
+ "TFLASH_2.8V",
+};
+
void set_board_type(void)
{
/* Set GPA1 pin 1 to HI - enable XCL205 output */
@@ -403,21 +411,6 @@
#endif
}
-static int pmic_init_max77686(void)
-{
- struct pmic *p = pmic_get("MAX77686_PMIC");
-
- if (pmic_probe(p))
- return -ENODEV;
-
- /* Set LDO Voltage */
- max77686_set_ldo_voltage(p, 20, 1800000); /* LDO20 eMMC */
- max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 SD */
- max77686_set_ldo_voltage(p, 22, 2800000); /* LDO22 eMMC */
-
- return 0;
-}
-
int exynos_early_init_f(void)
{
board_clock_init();
@@ -434,8 +427,10 @@
int exynos_power_init(void)
{
- pmic_init(0);
- pmic_init_max77686();
+ int list_count = ARRAY_SIZE(mmc_regulators);
+
+ if (regulator_list_autoset(mmc_regulators, list_count, NULL, true))
+ error("Unable to init all mmc regulators");
return 0;
}
@@ -443,19 +438,20 @@
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
- struct pmic *p_pmic;
+ struct udevice *dev;
+ int ret;
- p_pmic = pmic_get("MAX77686_PMIC");
- if (!p_pmic)
- return -ENODEV;
-
- if (pmic_probe(p_pmic))
- return -1;
+ ret = regulator_by_platname("VDD_UOTG_3.0V", &dev);
+ if (ret) {
+ error("Regulator get error: %d", ret);
+ return ret;
+ }
if (on)
- return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+ return regulator_set_mode(dev, OPMODE_ON);
else
- return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+ return regulator_set_mode(dev, OPMODE_LPM);
+
}
struct s3c_plat_otg_data s5pc210_otg_data = {
@@ -472,7 +468,8 @@
int board_usb_init(int index, enum usb_init_type init)
{
#ifdef CONFIG_CMD_USB
- struct pmic *p_pmic;
+ struct udevice *dev;
+ int ret;
/* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
/* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
@@ -490,14 +487,30 @@
/* Power off and on BUCK8 for LAN9730 */
debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
- p_pmic = pmic_get("MAX77686_PMIC");
- if (p_pmic && !pmic_probe(p_pmic)) {
- max77686_set_buck_voltage(p_pmic, 8, 750000);
- max77686_set_buck_voltage(p_pmic, 8, 3300000);
+ ret = regulator_by_platname("VCC_P3V3_2.85V", &dev);
+ if (ret) {
+ error("Regulator get error: %d", ret);
+ return ret;
}
-#endif
+ ret = regulator_set_enable(dev, true);
+ if (ret) {
+ error("Regulator %s enable setting error: %d", dev->name, ret);
+ return ret;
+ }
+ ret = regulator_set_value(dev, 750000);
+ if (ret) {
+ error("Regulator %s value setting error: %d", dev->name, ret);
+ return ret;
+ }
+
+ ret = regulator_set_value(dev, 3300000);
+ if (ret) {
+ error("Regulator %s value setting error: %d", dev->name, ret);
+ return ret;
+ }
+#endif
debug("USB_udc_probe\n");
return s3c_udc_probe(&s5pc210_otg_data);
}