Merge git://git.denx.de/u-boot-fsl-qoriq
trini: Drop local memset() from
examples/standalone/mem_to_mem_idma2intr.c
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/Makefile b/Makefile
index c30f90a..27d425e 100644
--- a/Makefile
+++ b/Makefile
@@ -655,6 +655,7 @@
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
diff --git a/README b/README
index d916ee7..bc626dc 100644
--- a/README
+++ b/README
@@ -4898,12 +4898,6 @@
"Debug Server firmware" and triggering SP boot-rom.
This firmware often needs to be loaded during U-Boot booting.
-- CONFIG_FSL_DEBUG_SERVER
- Enable the Debug Server for Layerscape SoCs.
-
-- CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE
- Define minimum DDR size required for debug server image
-
- CONFIG_SYS_MC_RSV_MEM_ALIGN
Define alignment of reserved memory MC requires
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0083bf9..38ad590 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -788,6 +788,7 @@
config TARGET_LS1012AQDS
bool "Support ls1012aqds"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012AQDS platform.
@@ -797,6 +798,7 @@
config TARGET_LS1012ARDB
bool "Support ls1012ardb"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012ARDB platform.
@@ -806,6 +808,7 @@
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012AFRDM platform.
@@ -817,16 +820,21 @@
bool "Support ls1021aqds"
select CPU_V7
select SUPPORT_SPL
+ select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ select LS1_DEEP_SLEEP
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select CPU_V7
select SUPPORT_SPL
+ select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ select LS1_DEEP_SLEEP
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
+ select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
@@ -835,12 +843,39 @@
config TARGET_LS1043ARDB
bool "Support ls1043ardb"
+ select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
help
Support for Freescale LS1043ARDB platform.
+config TARGET_LS1046AQDS
+ bool "Support ls1046aqds"
+ select ARCH_LS1046A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select SUPPORT_SPL
+ select DM_SPI_FLASH if DM_SPI
+ help
+ Support for Freescale LS1046AQDS platform.
+ The LS1046A Development System (QDS) is a high-performance
+ development platform that supports the QorIQ LS1046A
+ Layerscape Architecture processor.
+
+config TARGET_LS1046ARDB
+ bool "Support ls1046ardb"
+ select ARCH_LS1046A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select SUPPORT_SPL
+ select DM_SPI_FLASH if DM_SPI
+ help
+ Support for Freescale LS1046ARDB platform.
+ The LS1046A Reference Design Board (RDB) is a high-performance
+ development platform that supports the QorIQ LS1046A
+ Layerscape Architecture processor.
+
config TARGET_H2200
bool "Support h2200"
select CPU_PXA
@@ -926,6 +961,8 @@
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/cpu/armv7/ls102xa/Kconfig"
+
source "arch/arm/cpu/armv7/mx7/Kconfig"
source "arch/arm/cpu/armv7/mx6/Kconfig"
@@ -934,6 +971,8 @@
source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
+
source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-rmobile/Kconfig"
@@ -991,7 +1030,9 @@
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
+source "board/freescale/ls1046ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
new file mode 100644
index 0000000..920eb4a
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -0,0 +1,6 @@
+config ARCH_LS1021A
+ bool "Freescale Layerscape LS1021A SoC"
+ select SYS_FSL_ERRATUM_A010315
+
+config LS1_DEEP_SLEEP
+ bool "Freescale Layerscape 1 deep sleep"
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index 0228300..f8300c7 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -16,5 +16,5 @@
obj-$(CONFIG_SPL) += spl.o
ifdef CONFIG_ARMV7_PSCI
-obj-y += psci.o
+obj-y += psci.o ls102xa_psci.o
endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.c b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
index 6212640..b4de523 100644
--- a/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
@@ -9,6 +9,163 @@
#include "fsl_epu.h"
+struct fsm_reg_vals epu_default_val[] = {
+ /* EPGCR (Event Processor Global Control Register) */
+ {EPGCR, 0},
+ /* EPECR (Event Processor Event Control Registers) */
+ {EPECR0 + EPECR_STRIDE * 0, 0},
+ {EPECR0 + EPECR_STRIDE * 1, 0},
+ {EPECR0 + EPECR_STRIDE * 2, 0xF0004004},
+ {EPECR0 + EPECR_STRIDE * 3, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 4, 0x20000084},
+ {EPECR0 + EPECR_STRIDE * 5, 0x08000004},
+ {EPECR0 + EPECR_STRIDE * 6, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 7, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 8, 0x60000084},
+ {EPECR0 + EPECR_STRIDE * 9, 0x08000084},
+ {EPECR0 + EPECR_STRIDE * 10, 0x42000084},
+ {EPECR0 + EPECR_STRIDE * 11, 0x90000084},
+ {EPECR0 + EPECR_STRIDE * 12, 0x80000084},
+ {EPECR0 + EPECR_STRIDE * 13, 0x08000084},
+ {EPECR0 + EPECR_STRIDE * 14, 0x02000084},
+ {EPECR0 + EPECR_STRIDE * 15, 0x00000004},
+ /*
+ * EPEVTCR (Event Processor EVT Pin Control Registers)
+ * SCU8 triger EVT2, and SCU11 triger EVT9
+ */
+ {EPEVTCR0 + EPEVTCR_STRIDE * 0, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 1, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 3, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 4, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 5, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 6, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 7, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 8, 0},
+ {EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001},
+ /* EPCMPR (Event Processor Counter Compare Registers) */
+ {EPCMPR0 + EPCMPR_STRIDE * 0, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 1, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 3, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020},
+ {EPCMPR0 + EPCMPR_STRIDE * 6, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 7, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 13, 0},
+ {EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF},
+ {EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF},
+ /* EPCCR (Event Processor Counter Control Registers) */
+ {EPCCR0 + EPCCR_STRIDE * 0, 0},
+ {EPCCR0 + EPCCR_STRIDE * 1, 0},
+ {EPCCR0 + EPCCR_STRIDE * 2, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 3, 0},
+ {EPCCR0 + EPCCR_STRIDE * 4, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 5, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 6, 0},
+ {EPCCR0 + EPCCR_STRIDE * 7, 0},
+ {EPCCR0 + EPCCR_STRIDE * 8, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 9, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 10, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 11, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 12, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 13, 0},
+ {EPCCR0 + EPCCR_STRIDE * 14, 0x92840000},
+ {EPCCR0 + EPCCR_STRIDE * 15, 0x92840000},
+ /* EPSMCR (Event Processor SCU Mux Control Registers) */
+ {EPSMCR0 + EPSMCR_STRIDE * 0, 0},
+ {EPSMCR0 + EPSMCR_STRIDE * 1, 0},
+ {EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000},
+ {EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000},
+ {EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00},
+ {EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000},
+ {EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000},
+ {EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030},
+ {EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000},
+ {EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000},
+ {EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100},
+ {EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031},
+ {EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000},
+ /* EPACR (Event Processor Action Control Registers) */
+ {EPACR0 + EPACR_STRIDE * 0, 0},
+ {EPACR0 + EPACR_STRIDE * 1, 0},
+ {EPACR0 + EPACR_STRIDE * 2, 0},
+ {EPACR0 + EPACR_STRIDE * 3, 0x00000080},
+ {EPACR0 + EPACR_STRIDE * 4, 0},
+ {EPACR0 + EPACR_STRIDE * 5, 0x00000040},
+ {EPACR0 + EPACR_STRIDE * 6, 0},
+ {EPACR0 + EPACR_STRIDE * 7, 0},
+ {EPACR0 + EPACR_STRIDE * 8, 0},
+ {EPACR0 + EPACR_STRIDE * 9, 0x0000001C},
+ {EPACR0 + EPACR_STRIDE * 10, 0x00000020},
+ {EPACR0 + EPACR_STRIDE * 11, 0},
+ {EPACR0 + EPACR_STRIDE * 12, 0x00000003},
+ {EPACR0 + EPACR_STRIDE * 13, 0x06000000},
+ {EPACR0 + EPACR_STRIDE * 14, 0x04000000},
+ {EPACR0 + EPACR_STRIDE * 15, 0x02000000},
+ /* EPIMCR (Event Processor Input Mux Control Registers) */
+ {EPIMCR0 + EPIMCR_STRIDE * 0, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 1, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 2, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 3, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 6, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 7, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 8, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 9, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 10, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 11, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 13, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 14, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 15, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 17, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 18, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 19, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 21, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 23, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 24, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 25, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 26, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 27, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000},
+ {EPIMCR0 + EPIMCR_STRIDE * 29, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 30, 0},
+ {EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000},
+ /* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+ {EPXTRIGCR, 0x0000FFDF},
+ /* end */
+ {FSM_END_FLAG, 0},
+};
+
+/**
+ * fsl_epu_setup - Setup EPU registers to default values
+ */
+void fsl_epu_setup(void *epu_base)
+{
+ struct fsm_reg_vals *data = epu_default_val;
+
+ if (!epu_base || !data)
+ return;
+
+ while (data->offset != FSM_END_FLAG) {
+ out_be32(epu_base + data->offset, data->value);
+ data++;
+ }
+}
+
/**
* fsl_epu_clean - Clear EPU registers
*/
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.h b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
index d658aad..d6f7310 100644
--- a/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
@@ -63,6 +63,14 @@
#define EPCTR31 0xA7C
#define EPCTR_STRIDE FSL_STRIDE_4B
+#define FSM_END_FLAG 0xFFFFFFFFUL
+
+struct fsm_reg_vals {
+ u32 offset;
+ u32 value;
+};
+
+void fsl_epu_setup(void *epu_base);
void fsl_epu_clean(void *epu_base);
#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
index 46fac51..8e247ee 100644
--- a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
@@ -23,9 +23,15 @@
u64 ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
+ if (!(serdes1_prtcl_map & (1ULL << NONE)))
+ fsl_serdes_init();
+
ret |= (1ULL << device) & serdes1_prtcl_map;
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
+ if (!(serdes2_prtcl_map & (1ULL << NONE)))
+ fsl_serdes_init();
+
ret |= (1ULL << device) & serdes2_prtcl_map;
#endif
@@ -87,19 +93,24 @@
serdes_prtcl_map |= (1ULL << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes_prtcl_map |= (1ULL << NONE);
+
return serdes_prtcl_map;
}
void fsl_serdes_init(void)
{
#ifdef CONFIG_SYS_FSL_SRDS_1
- serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ if (!(serdes1_prtcl_map & (1ULL << NONE)))
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
CONFIG_SYS_FSL_SERDES_ADDR,
RCWSR4_SRDS1_PRTCL_MASK,
RCWSR4_SRDS1_PRTCL_SHIFT);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
- serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ if (!(serdes2_prtcl_map & (1ULL << NONE)))
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
CONFIG_SYS_FSL_SERDES_ADDR +
FSL_SRDS_2 * 0x1000,
RCWSR4_SRDS2_PRTCL_MASK,
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
new file mode 100644
index 0000000..1cbe93c
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/psci.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <fsl_immap.h>
+#include "fsl_epu.h"
+
+#define __secure __attribute__((section("._secure.text")))
+
+#define CCSR_GICD_CTLR 0x1000
+#define CCSR_GICC_CTLR 0x2000
+#define DCSR_RCPM_CG1CR0 0x31c
+#define DCSR_RCPM_CSTTACR0 0xb00
+#define DCFG_CRSTSR_WDRFR 0x8
+#define DDR_RESV_LEN 128
+
+#ifdef CONFIG_LS1_DEEP_SLEEP
+/*
+ * DDR controller initialization training breaks the first 128 bytes of DDR,
+ * save them so that the bootloader can restore them while resuming.
+ */
+static void __secure ls1_save_ddr_head(void)
+{
+ const char *src = (const char *)CONFIG_SYS_SDRAM_BASE;
+ char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ int i;
+
+ out_le32(&scfg->sparecr[2], dest);
+
+ for (i = 0; i < DDR_RESV_LEN; i++)
+ *dest++ = *src++;
+}
+
+static void __secure ls1_fsm_setup(void)
+{
+ void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+ void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR;
+
+ out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
+ out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001);
+
+ fsl_epu_setup((void *)dcsr_epu_base);
+
+ /* Pull MCKE signal low before enabling deep sleep signal in FPGA */
+ out_be32(dcsr_epu_base + EPECR0, 0x5);
+ out_be32(dcsr_epu_base + EPSMCR15, 0x76300000);
+}
+
+static void __secure ls1_deepsleep_irq_cfg(void)
+{
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+ u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;
+
+ /* Mask interrupts from GIC */
+ out_be32(&rcpm->nfiqoutr, 0x0ffffffff);
+ out_be32(&rcpm->nirqoutr, 0x0ffffffff);
+ /* Mask deep sleep wake-up interrupts while entering deep sleep */
+ out_be32(&rcpm->dsimskr, 0x0ffffffff);
+
+ ippdexpcr0 = in_be32(&rcpm->ippdexpcr0);
+ /*
+ * Workaround: There is bug of register ippdexpcr1, when read it always
+ * returns zero, so its value is saved to a scrachpad register to be
+ * read, that is why we don't read it from register ippdexpcr1 itself.
+ */
+ ippdexpcr1 = in_le32(&scfg->sparecr[7]);
+
+ if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
+ pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
+ SCFG_PMCINTECR_ETSECRXG1 |
+ SCFG_PMCINTECR_ETSECERRG0 |
+ SCFG_PMCINTECR_ETSECERRG1;
+
+ if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO)
+ pmcintecr |= SCFG_PMCINTECR_GPIO;
+
+ if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART)
+ pmcintecr |= SCFG_PMCINTECR_LPUART;
+
+ if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER)
+ pmcintecr |= SCFG_PMCINTECR_FTM;
+
+ /* Always set external IRQ pins as wakeup source */
+ pmcintecr |= SCFG_PMCINTECR_IRQ0 | SCFG_PMCINTECR_IRQ1;
+
+ out_be32(&scfg->pmcintlecr, 0);
+ /* Clear PMC interrupt status */
+ out_be32(&scfg->pmcintsr, 0xffffffff);
+ /* Enable wakeup interrupt during deep sleep */
+ out_be32(&scfg->pmcintecr, pmcintecr);
+}
+
+static void __secure ls1_delay(unsigned int loop)
+{
+ while (loop--) {
+ int i = 1000;
+ while (i--)
+ ;
+ }
+}
+
+static void __secure ls1_start_fsm(void)
+{
+ void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+ void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR;
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+ /* Set HRSTCR */
+ setbits_be32(&scfg->hrstcr, 0x80000000);
+
+ /* Place DDR controller in self refresh mode */
+ setbits_be32(&ddr->sdram_cfg_2, 0x80000000);
+
+ ls1_delay(2000);
+
+ /* Set EVT4_B to lock the signal MCKE down */
+ out_be32(dcsr_epu_base + EPECR0, 0x0);
+
+ ls1_delay(2000);
+
+ out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0);
+ out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0);
+
+ /* Enable all EPU Counters */
+ setbits_be32(dcsr_epu_base + EPGCR, 0x80000000);
+
+ /* Enable SCU15 */
+ setbits_be32(dcsr_epu_base + EPECR15, 0x90000004);
+
+ /* Enter WFI mode, and EPU FSM will start */
+ __asm__ __volatile__ ("wfi" : : : "memory");
+
+ /* NEVER ENTER HERE */
+ while (1)
+ ;
+}
+
+static void __secure ls1_deep_sleep(u32 entry_point)
+{
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+ struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+#ifdef QIXIS_BASE
+ u32 tmp;
+ void *qixis_base = (void *)QIXIS_BASE;
+#endif
+
+ /* Enable cluster to enter the PCL10 state */
+ out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
+
+ /* Save the first 128 bytes of DDR data */
+ ls1_save_ddr_head();
+
+ /* Save the kernel resume entry */
+ out_le32(&scfg->sparecr[3], entry_point);
+
+ /* Request to put cluster 0 in PCL10 state */
+ setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0);
+
+ /* Setup the registers of the EPU FSM for deep sleep */
+ ls1_fsm_setup();
+
+#ifdef QIXIS_BASE
+ /* Connect the EVENT button to IRQ in FPGA */
+ tmp = in_8(qixis_base + QIXIS_CTL_SYS);
+ tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
+ tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
+ out_8(qixis_base + QIXIS_CTL_SYS, tmp);
+
+ /* Enable deep sleep signals in FPGA */
+ tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
+ tmp |= QIXIS_PWR_CTL2_PCTL;
+ out_8(qixis_base + QIXIS_PWR_CTL2, tmp);
+
+ /* Pull down PCIe RST# */
+ tmp = in_8(qixis_base + QIXIS_RST_FORCE_3);
+ tmp |= QIXIS_RST_FORCE_3_PCIESLOT1;
+ out_8(qixis_base + QIXIS_RST_FORCE_3, tmp);
+#endif
+
+ /* Enable Warm Device Reset */
+ setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
+ setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);
+
+ ls1_deepsleep_irq_cfg();
+
+ psci_v7_flush_dcache_all();
+
+ ls1_start_fsm();
+}
+
+#else
+static void __secure ls1_sleep(void)
+{
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+
+#ifdef QIXIS_BASE
+ u32 tmp;
+ void *qixis_base = (void *)QIXIS_BASE;
+
+ /* Connect the EVENT button to IRQ in FPGA */
+ tmp = in_8(qixis_base + QIXIS_CTL_SYS);
+ tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
+ tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
+ out_8(qixis_base + QIXIS_CTL_SYS, tmp);
+#endif
+
+ /* Enable cluster to enter the PCL10 state */
+ out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);
+
+ setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ);
+
+ __asm__ __volatile__ ("wfi" : : : "memory");
+}
+#endif
+
+void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id)
+{
+#ifdef CONFIG_LS1_DEEP_SLEEP
+ ls1_deep_sleep(entry_point);
+#else
+ ls1_sleep();
+#endif
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S
index 8f38680..3d41d37 100644
--- a/arch/arm/cpu/armv7/ls102xa/psci.S
+++ b/arch/arm/cpu/armv7/ls102xa/psci.S
@@ -29,6 +29,7 @@
#define PSCI_FN_AFFINITY_INFO_FEATURE_MASK 0x0
#define PSCI_FN_SYSTEM_OFF_FEATURE_MASK 0x0
#define PSCI_FN_SYSTEM_RESET_FEATURE_MASK 0x0
+#define PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK 0x0
.pushsection ._secure.text, "ax"
@@ -61,6 +62,8 @@
.word PSCI_FN_SYSTEM_OFF_FEATURE_MASK
.word ARM_PSCI_0_2_FN_SYSTEM_RESET
.word PSCI_FN_SYSTEM_RESET_FEATURE_MASK
+ .word ARM_PSCI_1_0_FN_SYSTEM_SUSPEND
+ .word PSCI_FN_SYSTEM_SUSPEND_FEATURE_MASK
.word 0
.word ARM_PSCI_RET_NI
@@ -243,4 +246,12 @@
1: wfi
b 1b
+.globl psci_system_suspend
+psci_system_suspend:
+ push {lr}
+
+ bl ls1_system_suspend
+
+ pop {pc}
+
.popsection
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index b1b0c71..31f00cb 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -7,9 +7,11 @@
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/ls102xa_soc.h>
#include <asm/arch/ls102xa_stream_id.h>
+#include <fsl_csu.h>
struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
@@ -58,12 +60,29 @@
return major;
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void)
+{
+ int i;
+
+ for (i = PCIE1; i <= PCIE2; i++)
+ if (!is_serdes_configured(i)) {
+ debug("PCIe%d: disabled all R/W permission!\n", i);
+ set_pcie_ns_access(i, 0);
+ }
+}
+#endif
+
int arch_soc_init(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
unsigned int major;
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
#ifdef CONFIG_FSL_QSPI
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S
index f80f6e2..6a36208 100644
--- a/arch/arm/cpu/armv7/psci.S
+++ b/arch/arm/cpu/armv7/psci.S
@@ -187,7 +187,7 @@
.weak psci_get_cpu_id
/* Imported from Linux kernel */
-LENTRY(v7_flush_dcache_all)
+ENTRY(psci_v7_flush_dcache_all)
stmfd sp!, {r4-r5, r7, r9-r11, lr}
dmb @ ensure ordering with previous memory accesses
mrc p15, 1, r0, c0, c0, 1 @ read clidr
@@ -234,7 +234,7 @@
isb
ldmfd sp!, {r4-r5, r7, r9-r11, lr}
bx lr
-ENDPROC(v7_flush_dcache_all)
+ENDPROC(psci_v7_flush_dcache_all)
ENTRY(psci_disable_smp)
mrc p15, 0, r0, c1, c0, 1 @ ACTLR
@@ -264,7 +264,7 @@
isb
dsb
- bl v7_flush_dcache_all
+ bl psci_v7_flush_dcache_all
clrex @ Why???
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
new file mode 100644
index 0000000..f8057ba
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -0,0 +1,17 @@
+config ARCH_LS1012A
+ bool "Freescale Layerscape LS1012A SoC"
+ select SYS_FSL_MMDC
+ select SYS_FSL_ERRATUM_A010315
+
+config ARCH_LS1043A
+ bool "Freescale Layerscape LS1043A SoC"
+ select SYS_FSL_ERRATUM_A010315
+
+config ARCH_LS1046A
+ bool "Freescale Layerscape LS1046A SoC"
+
+config SYS_FSL_MMDC
+ bool "Freescale Multi Mode DDR Controller"
+
+config SYS_FSL_ERRATUM_A010315
+ bool "Workaround for PCIe erratum A010315"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 8c1317f..51c1cee 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -30,10 +30,10 @@
obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
endif
-ifneq ($(CONFIG_LS1012A),)
+ifneq ($(CONFIG_ARCH_LS1012A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1012a_serdes.o
endif
-ifneq ($(CONFIG_LS1046A),)
+ifneq ($(CONFIG_ARCH_LS1046A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 20be323..f865373 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -18,7 +18,6 @@
#include <asm/arch/mp.h>
#endif
#include <fm_eth.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
@@ -457,10 +456,6 @@
#ifdef CONFIG_SYS_MEM_TOP_HIDE
#error CONFIG_SYS_MEM_TOP_HIDE not to be used together with this function
#endif
-/* Carve the Debug Server private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_DEBUG_SERVER
- ram_top -= debug_server_get_dram_block_size();
-#endif
/* Carve the MC private DRAM block from the end of DRAM */
#ifdef CONFIG_FSL_MC_ENET
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
index db2771a..e06b063 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
@@ -22,9 +22,15 @@
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
+ if (!serdes1_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
+ if (!serdes2_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes2_prtcl_map[device];
#endif
@@ -98,6 +104,9 @@
u32 cfg;
int lane;
+ if (serdes_prtcl_map[NONE])
+ return;
+
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
cfg = gur_in32(&gur->rcwsr[4]) & sd_prctl_mask;
@@ -115,6 +124,9 @@
else
serdes_prtcl_map[lane_prtcl] = 1;
}
+
+ /* Set the first element to indicate serdes has been initialized */
+ serdes_prtcl_map[NONE] = 1;
}
void fsl_serdes_init(void)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 8922197..55005f0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -60,7 +60,7 @@
sys_info->freq_ddrbus = sysclk;
#endif
-#ifdef CONFIG_LS1012A
+#ifdef CONFIG_ARCH_LS1012A
sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
@@ -91,7 +91,7 @@
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
-#ifdef CONFIG_LS1012A
+#ifdef CONFIG_ARCH_LS1012A
sys_info->freq_systembus = sys_info->freq_ddrbus / 2;
sys_info->freq_ddrbus *= 2;
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index d5f29ee..7faa86c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -28,9 +28,15 @@
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
+ if (!serdes1_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
+ if (!serdes2_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes2_prtcl_map[device];
#endif
@@ -79,6 +85,9 @@
u32 cfg;
int lane;
+ if (serdes_prtcl_map[NONE])
+ return;
+
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
cfg = gur_in32(&gur->rcwsr[28]) & sd_prctl_mask;
@@ -136,6 +145,9 @@
#endif
}
}
+
+ /* Set the first element to indicate serdes has been initialized */
+ serdes_prtcl_map[NONE] = 1;
}
void fsl_serdes_init(void)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 5af6b73..5d0b7a4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -179,6 +179,21 @@
isb
dsb sy
#endif
+
+#ifdef CONFIG_ARCH_LS1046A
+ /* Initialize the L2 RAM latency */
+ mrs x1, S3_1_c11_c0_2
+ mov x0, #0x1C7
+ /* Clear L2 Tag RAM latency and L2 Data RAM latency */
+ bic x1, x1, x0
+ /* Set L2 data ram latency bits [2:0] */
+ orr x1, x1, #0x2
+ /* set L2 tag ram latency bits [8:6] */
+ orr x1, x1, #0x80
+ msr S3_1_c11_c0_2, x1
+ isb
+#endif
+
mov lr, x29 /* Restore LR */
ret
ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index f54ac3f..b68e87d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -17,6 +17,9 @@
#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
#include <asm/armv8/sec_firmware.h>
#endif
+#ifdef CONFIG_CHAIN_OF_TRUST
+#include <fsl_validate.h>
+#endif
int ppa_init(void)
{
@@ -24,12 +27,30 @@
u32 *boot_loc_ptr_l, *boot_loc_ptr_h;
int ret;
+#ifdef CONFIG_CHAIN_OF_TRUST
+ uintptr_t ppa_esbc_hdr = CONFIG_SYS_LS_PPA_ESBC_ADDR;
+ uintptr_t ppa_img_addr = 0;
+#endif
+
#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
#else
#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
#endif
+#ifdef CONFIG_CHAIN_OF_TRUST
+ ppa_img_addr = (uintptr_t)ppa_fit_addr;
+ if (fsl_check_boot_mode_secure() != 0) {
+ ret = fsl_secboot_validate(ppa_esbc_hdr,
+ CONFIG_PPA_KEY_HASH,
+ &ppa_img_addr);
+ if (ret != 0)
+ printf("PPA validation failed\n");
+ else
+ printf("PPA validation Successful\n");
+ }
+#endif
+
#ifdef CONFIG_FSL_LSCH3
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
boot_loc_ptr_l = &gur->bootlocptrl;
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index f62b78d..463d1e3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -8,10 +8,14 @@
#include <fsl_ifc.h>
#include <ahci.h>
#include <scsi.h>
+#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
#include <asm/global_data.h>
#include <asm/arch-fsl-layerscape/config.h>
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+#include <fsl_csu.h>
+#endif
#ifdef CONFIG_SYS_FSL_DDR
#include <fsl_ddr_sdram.h>
#include <fsl_ddr.h>
@@ -58,11 +62,13 @@
#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
- out_le32(eddrtqcr1, 0x63b30002);
+ if (fsl_ddr_get_version(0) == 0x50200)
+ out_le32(eddrtqcr1, 0x63b30002);
#endif
#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
- out_le32(eddrtqcr1, 0x63b30002);
+ if (fsl_ddr_get_version(0) == 0x50200)
+ out_le32(eddrtqcr1, 0x63b30002);
#endif
#endif
}
@@ -222,6 +228,10 @@
{
struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
+#ifdef CONFIG_ARCH_LS1046A
+ /* Disable SATA ECC */
+ out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
+#endif
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
@@ -298,11 +308,28 @@
#endif
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void)
+{
+ int i;
+
+ for (i = PCIE1; i <= PCIE4; i++)
+ if (!is_serdes_configured(i)) {
+ debug("PCIe%d: disabled all R/W permission!\n", i);
+ set_pcie_ns_access(i, 0);
+ }
+}
+#endif
+
void fsl_lsch2_early_init_f(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs(); /* tighten IFC timing */
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 19e34fa..1dabdbb 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -8,7 +8,6 @@
#include <spl.h>
#include <asm/io.h>
#include <fsl_ifc.h>
-#include <fsl_csu.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -62,13 +61,5 @@
i2c_init_all();
#endif
dram_init();
-
- /* Clear the BSS */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
- board_init_r(NULL, 0);
}
#endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index df57288..e89b6e80 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -144,6 +144,8 @@
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
+ fsl-ls1046a-qds-duart.dtb \
+ fsl-ls1046a-rdb.dtb \
fsl-ls1012a-qds.dtb \
fsl-ls1012a-rdb.dtb \
fsl-ls1012a-frdm.dtb
diff --git a/arch/arm/dts/fsl-ls1046a-qds-duart.dts b/arch/arm/dts/fsl-ls1046a-qds-duart.dts
new file mode 100644
index 0000000..10a95ea
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1046a-qds-duart.dts
@@ -0,0 +1,16 @@
+/*
+ * Device Tree file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &duart0;
+ };
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
new file mode 100644
index 0000000..c512293
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -0,0 +1,77 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@nxp.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "fsl-ls1046a.dtsi"
+
+/ {
+ model = "LS1046A QDS Board";
+ aliases {
+ spi0 = &qspi;
+ spi1 = &dspi0;
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <1000000>; /* input clock */
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ };
+
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
new file mode 100644
index 0000000..4902454
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1046a.dtsi"
+
+/ {
+ model = "LS1046A RDB Board";
+
+ aliases {
+ spi0 = &qspi;
+ };
+
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
new file mode 100644
index 0000000..87dd997
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -0,0 +1,166 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+ compatible = "fsl,ls1046a";
+ interrupt-parent = <&gic>;
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ gic: interrupt-controller@1400000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+ <0x0 0x1420000 0 0x10000>, /* GICC */
+ <0x0 0x1440000 0 0x20000>, /* GICH */
+ <0x0 0x1460000 0 0x20000>; /* GICV */
+ interrupts = <1 9 0xf08>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1ee1000 {
+ compatible = "fsl,ls1046a-clockgen";
+ reg = <0x0 0x1ee1000 0x0 0x1000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ dspi0: dspi@2100000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 64 0x4>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ num-cs = <6>;
+ big-endian;
+ status = "disabled";
+ };
+
+ dspi1: dspi@2110000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2110000 0x0 0x10000>;
+ interrupts = <0 65 0x4>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ num-cs = <6>;
+ big-endian;
+ status = "disabled";
+ };
+
+ ifc: ifc@1530000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x1530000 0x0 0x10000>;
+ interrupts = <0 43 0x4>;
+ };
+
+ i2c0: i2c@2180000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <0 56 0x4>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2190000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <0 57 0x4>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@21a0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21a0000 0x0 0x10000>;
+ interrupts = <0 58 0x4>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@21b0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21b0000 0x0 0x10000>;
+ interrupts = <0 59 0x4>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0500 0x0 0x100>;
+ interrupts = <0 54 0x4>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ duart1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0600 0x0 0x100>;
+ interrupts = <0 54 0x4>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ duart2: serial@21d0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ interrupts = <0 55 0x4>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ duart3: serial@21d0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ interrupts = <0 55 0x4>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ qspi: quadspi@1550000 {
+ compatible = "fsl,vf610-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ num-cs = <4>;
+ big-endian;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 5279981..a5c6c4c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -7,15 +7,18 @@
#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
#define _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
+#include <linux/kconfig.h>
#include <fsl_ddrc_version.h>
+#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000
+
#ifdef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDRC_GEN4
#else
#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */
#endif
-#ifndef CONFIG_LS1012A
+#ifndef CONFIG_ARCH_LS1012A
#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#endif
@@ -165,6 +168,7 @@
#define CONFIG_SYS_FSL_SEC_BE
#define CONFIG_SYS_FSL_SRDS_1
+
/* SoC related */
#ifdef CONFIG_LS1043A
#define CONFIG_MAX_CPUS 4
@@ -201,13 +205,13 @@
#define CONFIG_SYS_FSL_ERRATUM_A009942
#define CONFIG_SYS_FSL_ERRATUM_A009660
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
-#elif defined(CONFIG_LS1012A)
+#elif defined(CONFIG_ARCH_LS1012A)
#define CONFIG_MAX_CPUS 1
#undef CONFIG_SYS_FSL_DDRC_ARM_GEN3
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
-#elif defined(CONFIG_LS1046A)
+#elif defined(CONFIG_ARCH_LS1046A)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
@@ -234,6 +238,12 @@
#define GICC_BASE 0x01420000
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
+
+#define CONFIG_SYS_FSL_ERRATUM_A008511
+#define CONFIG_SYS_FSL_ERRATUM_A009801
+#define CONFIG_SYS_FSL_ERRATUM_A009803
+#define CONFIG_SYS_FSL_ERRATUM_A009942
+#define CONFIG_SYS_FSL_ERRATUM_A010165
#else
#error SoC not defined
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index e1b3f44..9f94b45 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -11,6 +11,10 @@
#ifdef CONFIG_LS2080A
enum srds_prtcl {
+ /*
+ * Nobody will check whether the device 'NONE' has been configured,
+ * So use it to indicate if the serdes_prtcl_map has been initialized.
+ */
NONE = 0,
PCIE1,
PCIE2,
@@ -57,6 +61,10 @@
};
#elif defined(CONFIG_FSL_LSCH2)
enum srds_prtcl {
+ /*
+ * Nobody will check whether the device 'NONE' has been configured,
+ * So use it to indicate if the serdes_prtcl_map has been initialized.
+ */
NONE = 0,
PCIE1,
PCIE2,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 95a4293..df51871 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -60,7 +60,7 @@
#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x4800000000ULL
#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x5000000000ULL
/* LUT registers */
-#ifdef CONFIG_LS1012A
+#ifdef CONFIG_ARCH_LS1012A
#define PCIE_LUT_BASE 0xC0000
#else
#define PCIE_LUT_BASE 0x10000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 93e26c1..7acba27 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -33,15 +33,6 @@
#define CONFIG_SYS_FSL_WRIOP1_MDIO2 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x17000)
#define CONFIG_SYS_FSL_LSCH3_SERDES_ADDR (CONFIG_SYS_IMMR + 0xEA0000)
-/* SP (Cortex-A5) related */
-#define CONFIG_SYS_FSL_SP_ADDR (CONFIG_SYS_IMMR + 0x00F00000)
-#define CONFIG_SYS_FSL_SP_VSG_GIC_ADDR (CONFIG_SYS_FSL_SP_ADDR)
-#define CONFIG_SYS_FSL_SP_VSG_GIC_VIGR1 (CONFIG_SYS_FSL_SP_ADDR)
-#define CONFIG_SYS_FSL_SP_VSG_GIC_VIGR2 \
- (CONFIG_SYS_FSL_SP_ADDR + 0x0008)
-#define CONFIG_SYS_FSL_SP_LOOPBACK_DUART \
- (CONFIG_SYS_FSL_SP_ADDR + 0x1000)
-
#define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL
#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL
#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
index db76066..f46f1d8 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
@@ -6,6 +6,7 @@
#ifndef __FSL_NS_ACCESS_H_
#define __FSL_NS_ACCESS_H_
+#include <fsl_csu.h>
enum csu_cslx_ind {
CSU_CSLX_PCIE2_IO = 0,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 8d4a7ad..4512732 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -100,6 +100,10 @@
void erratum_a009635(void);
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void);
+#endif
+
bool soc_has_dp_ddr(void);
bool soc_has_aiop(void);
#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 56d8f32..fab8774 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -16,7 +16,9 @@
#define CONFIG_SYS_DCSRBAR 0x20000000
#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000)
+#define SYS_FSL_DCSR_RCPM_ADDR (CONFIG_SYS_DCSRBAR + 0x00222000)
+#define SYS_FSL_GIC_ADDR (CONFIG_SYS_IMMR + 0x00400000)
#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
@@ -129,6 +131,7 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_ERRATUM_A008378
#define CONFIG_SYS_FSL_ERRATUM_A009663
+#define CONFIG_SYS_FSL_ERRATUM_A009942
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#else
#error SoC not defined
diff --git a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
index 3a92f5a..fafc44b 100644
--- a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
@@ -10,6 +10,10 @@
#include <config.h>
enum srds_prtcl {
+ /*
+ * Nobody will check whether the device 'NONE' has been configured,
+ * So use it to indicate if the serdes_prtcl_map has been initialized.
+ */
NONE = 0,
PCIE1,
PCIE2,
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 0a80772..c34fd63 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -161,6 +161,17 @@
#define SCFG_SNPCNFGCR_DBG_RD_WR 0x000c0000
#define SCFG_SNPCNFGCR_EDMA_SNP 0x00020000
#define SCFG_ENDIANCR_LE 0x80000000
+#define SCFG_DPSLPCR_WDRR_EN 0x00000001
+#define SCFG_PMCINTECR_LPUART 0x40000000
+#define SCFG_PMCINTECR_FTM 0x20000000
+#define SCFG_PMCINTECR_GPIO 0x10000000
+#define SCFG_PMCINTECR_IRQ0 0x08000000
+#define SCFG_PMCINTECR_IRQ1 0x04000000
+#define SCFG_PMCINTECR_ETSECRXG0 0x00800000
+#define SCFG_PMCINTECR_ETSECRXG1 0x00400000
+#define SCFG_PMCINTECR_ETSECERRG0 0x00080000
+#define SCFG_PMCINTECR_ETSECERRG1 0x00040000
+#define SCFG_CLUSTERPMCR_WFIL2EN 0x80000000
/* Supplemental Configuration Unit */
struct ccsr_scfg {
@@ -226,7 +237,7 @@
u32 debug_streamid;
u32 resv10[5];
u32 snpcnfgcr;
- u32 resv11[1];
+ u32 hrstcr;
u32 intpcr;
u32 resv12[20];
u32 scfgrevcr;
@@ -243,6 +254,9 @@
u32 sdhciovserlcr;
u32 resv14[61];
u32 sparecr[8];
+ u32 resv15[248];
+ u32 core0sftrstsr;
+ u32 clusterpmcr;
};
/* Clocking */
@@ -433,6 +447,42 @@
u32 cmds; /* port 0/1 CMD status error */
};
+#define RCPM_POWMGTCSR 0x130
+#define RCPM_POWMGTCSR_SERDES_PW 0x80000000
+#define RCPM_POWMGTCSR_LPM20_REQ 0x00100000
+#define RCPM_POWMGTCSR_LPM20_ST 0x00000200
+#define RCPM_POWMGTCSR_P_LPM20_ST 0x00000100
+#define RCPM_IPPDEXPCR0 0x140
+#define RCPM_IPPDEXPCR0_ETSEC 0x80000000
+#define RCPM_IPPDEXPCR0_GPIO 0x00000040
+#define RCPM_IPPDEXPCR1 0x144
+#define RCPM_IPPDEXPCR1_LPUART 0x40000000
+#define RCPM_IPPDEXPCR1_FLEXTIMER 0x20000000
+#define RCPM_IPPDEXPCR1_OCRAM1 0x10000000
+#define RCPM_NFIQOUTR 0x15c
+#define RCPM_NIRQOUTR 0x16c
+#define RCPM_DSIMSKR 0x18c
+#define RCPM_CLPCL10SETR 0x1c4
+#define RCPM_CLPCL10SETR_C0 0x00000001
+
+struct ccsr_rcpm {
+ u8 rev1[0x4c];
+ u32 twaitsr;
+ u8 rev2[0xe0];
+ u32 powmgtcsr;
+ u8 rev3[0xc];
+ u32 ippdexpcr0;
+ u32 ippdexpcr1;
+ u8 rev4[0x14];
+ u32 nfiqoutr;
+ u8 rev5[0xc];
+ u32 nirqoutr;
+ u8 rev6[0x1c];
+ u32 dsimskr;
+ u8 rev7[0x34];
+ u32 clpcl10setr;
+};
+
uint get_svr(void);
#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
index a354684..9c91354 100644
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
@@ -11,4 +11,8 @@
int arch_soc_init(void);
int ls102xa_smmu_stream_id_init(void);
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+void erratum_a010315(void);
+#endif
+
#endif /* __FSL_LS102XA_SOC_H */
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 051e8ae..4525287 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -121,6 +121,24 @@
/* BOOTSCRIPT_ADDR is not required */
#endif
+#ifdef CONFIG_FSL_LS_PPA
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
+#ifdef CONFIG_LS1043A
+#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000
+#endif
+#else
+#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
+#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */
+
+/* Define the key hash here if SRK used for signing PPA image is
+ * different from SRK hash put in SFP used for U-Boot.
+ * Example
+ * #define CONFIG_PPA_KEY_HASH \
+ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ */
+#define CONFIG_PPA_KEY_HASH NULL
+#endif /* ifdef CONFIG_FSL_LS_PPA */
+
#include <config_fsl_chain_trust.h>
#endif /* #ifndef CONFIG_SPL_BUILD */
#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index 5b8ce4d..9f1f779 100644
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -89,6 +89,8 @@
int psci_update_dt(void *fdt);
void psci_board_init(void);
int fdt_psci(void *fdt);
+
+void psci_v7_flush_dcache_all(void);
#endif /* ! __ASSEMBLY__ */
#endif /* __ARM_PSCI_H__ */
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
index 399b208..4b5cd99 100644
--- a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -68,6 +68,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -79,6 +82,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -90,4 +96,7 @@
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
index 51972cb..74d27b9 100644
--- a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
@@ -32,6 +32,9 @@
int is_serdes_configured(enum srds_prtcl device)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes1_prtcl_map;
}
@@ -44,6 +47,9 @@
const struct serdes_config *ptr;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -59,4 +65,7 @@
enum srds_prtcl lane_prtcl = ptr->lanes[lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index b2bce0d..810ddb0 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -92,15 +92,27 @@
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
+ if (!serdes1_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
+ if (!serdes2_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes2_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_3
+ if (!serdes3_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes3_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_4
+ if (!serdes4_prtcl_map[NONE])
+ fsl_serdes_init();
+
ret |= serdes4_prtcl_map[device];
#endif
@@ -184,6 +196,9 @@
u32 cfg;
int lane;
+ if (serdes_prtcl_map[NONE])
+ return;
+
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
struct ccsr_sfp_regs __iomem *sfp_regs =
@@ -325,6 +340,9 @@
else
serdes_prtcl_map[lane_prtcl] = 1;
}
+
+ /* Set the first element to indicate serdes has been initialized */
+ serdes_prtcl_map[NONE] = 1;
}
void fsl_serdes_init(void)
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index ee60bfa..72d5e30 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -136,6 +136,9 @@
if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
return 0;
+ if (!(serdes_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes_prtcl_map;
}
@@ -514,6 +517,8 @@
if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
#endif
+ if (serdes_prtcl_map & (1 << NONE))
+ return;
/* Is serdes enabled at all? */
if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
@@ -857,6 +862,9 @@
SRDS_RSTCTL_SDPD);
}
#endif
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes_prtcl_map |= (1 << NONE);
}
const char *serdes_clock_to_string(u32 clock)
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
index baf52d5..8c075f1 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
@@ -71,11 +71,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -88,6 +96,10 @@
u32 tmp;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
@@ -221,6 +233,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds2_io_sel >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel);
return;
@@ -230,4 +245,7 @@
enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane];
serdes2_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
index ed78a66..b27763e 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c
@@ -34,11 +34,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -50,6 +58,10 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -61,6 +73,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
@@ -76,4 +91,7 @@
if (pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)
serdes2_prtcl_map &= ~(1 << SGMII_TSEC3);
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
index d146955..f1042d5 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
@@ -24,6 +24,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -35,6 +38,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg);
if (srds1_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -46,4 +52,7 @@
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_cfg][lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c
index 9199f01..7c287a0 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c
@@ -24,6 +24,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -35,6 +38,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -46,4 +52,7 @@
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c
index 6c80b5e..cc8ddb2 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c
@@ -33,6 +33,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -44,6 +47,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -55,4 +61,7 @@
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c
index 3632eb5..1f0f474 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c
@@ -28,6 +28,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -39,6 +42,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -62,4 +68,7 @@
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
serdes1_prtcl_map |= (1 << SGMII_TSEC4);
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
index 4b965f7..d8c0b62 100644
--- a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
@@ -33,11 +33,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -49,6 +57,10 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -60,6 +72,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
@@ -69,4 +84,7 @@
enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
serdes2_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/p1021_serdes.c b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
index 99a77bd..77b9439 100644
--- a/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c
@@ -41,6 +41,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -55,6 +58,9 @@
int lane;
u32 mask, val;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -67,6 +73,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
/* Init SERDES Receiver electrical idle detection control for PCIe */
/* Lane 0 is always PCIe 1 */
diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
index 14d17eb..88013d4 100644
--- a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
@@ -72,11 +72,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -88,6 +96,10 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -99,6 +111,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
@@ -108,4 +123,7 @@
enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
serdes2_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
index e83b0a3..b2b9f95 100644
--- a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
@@ -24,7 +24,12 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
return ret;
}
@@ -36,6 +41,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -47,4 +55,6 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc85xx/p2020_serdes.c b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
index 59d402c..0890eaa 100644
--- a/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c
@@ -32,6 +32,9 @@
int is_serdes_configured(enum srds_prtcl prtcl)
{
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << prtcl) & serdes1_prtcl_map;
}
@@ -43,6 +46,9 @@
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -54,4 +60,7 @@
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c b/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c
index 2a7e3bf..ea4f4c8 100644
--- a/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c
+++ b/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c
@@ -29,11 +29,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -46,6 +54,10 @@
MPC8610_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -57,6 +69,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
@@ -66,4 +81,7 @@
enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
serdes2_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c b/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c
index cc0f8e9..5b12cbd 100644
--- a/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c
+++ b/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c
@@ -38,11 +38,19 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int ret = (1 << device) & serdes1_prtcl_map;
+ int ret;
+
+ if (!(serdes1_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
+ ret = (1 << device) & serdes1_prtcl_map;
if (ret)
return ret;
+ if (!(serdes2_prtcl_map & (1 << NONE)))
+ fsl_serdes_init();
+
return (1 << device) & serdes2_prtcl_map;
}
@@ -55,6 +63,10 @@
MPC8641_PORDEVSR_IO_SEL_SHIFT;
int lane;
+ if (serdes1_prtcl_map & (1 << NONE) &&
+ serdes2_prtcl_map & (1 << NONE))
+ return;
+
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
@@ -66,6 +78,9 @@
serdes1_prtcl_map |= (1 << lane_prtcl);
}
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes1_prtcl_map |= (1 << NONE);
+
if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) {
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
return;
@@ -75,4 +90,7 @@
enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
serdes2_prtcl_map |= (1 << lane_prtcl);
}
+
+ /* Set the first bit to indicate serdes has been initialized */
+ serdes2_prtcl_map |= (1 << NONE);
}
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 45e248e..cb259cc 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -10,6 +10,10 @@
#include <config.h>
enum srds_prtcl {
+ /*
+ * Nobody will check whether the device 'NONE' has been configured,
+ * So use it to indicate if the serdes_prtcl_map has been initialized.
+ */
NONE = 0,
PCIE1,
PCIE2,
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
index 71ed15e..16fd445 100644
--- a/board/freescale/common/arm_sleep.c
+++ b/board/freescale/common/arm_sleep.c
@@ -66,6 +66,36 @@
*dst++ = *src++;
}
+#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
+void ls1_psci_resume_fixup(void)
+{
+ u32 tmp;
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+#ifdef QIXIS_BASE
+ void *qixis_base = (void *)QIXIS_BASE;
+
+ /* Pull on PCIe RST# */
+ out_8(qixis_base + QIXIS_RST_FORCE_3, 0);
+
+ /* disable deep sleep signals in FPGA */
+ tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
+ tmp &= ~QIXIS_PWR_CTL2_PCTL;
+ out_8(qixis_base + QIXIS_PWR_CTL2, tmp);
+#endif
+
+ /* Disable wakeup interrupt during deep sleep */
+ out_be32(&scfg->pmcintecr, 0);
+ /* Clear PMC interrupt status */
+ out_be32(&scfg->pmcintsr, 0xffffffff);
+
+ /* Disable Warm Device Reset */
+ tmp = in_be32(&scfg->dpslpcr);
+ tmp &= ~SCFG_DPSLPCR_WDRR_EN;
+ out_be32(&scfg->dpslpcr, tmp);
+}
+#endif
+
static void dp_resume_prepare(void)
{
dp_ddr_restore();
@@ -74,6 +104,9 @@
#ifdef CONFIG_U_QE
u_qe_resume();
#endif
+#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
+ ls1_psci_resume_fixup();
+#endif
}
int fsl_dp_resume(void)
@@ -88,7 +121,7 @@
dp_resume_prepare();
/* Get the entry address and jump to kernel */
- start_addr = in_le32(&scfg->sparecr[1]);
+ start_addr = in_le32(&scfg->sparecr[3]);
debug("Entry address is 0x%08x\n", start_addr);
kernel_resume = (void (*)(void))start_addr;
secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
diff --git a/board/freescale/common/ns_access.c b/board/freescale/common/ns_access.c
index d8d16c5..81c9211 100644
--- a/board/freescale/common/ns_access.c
+++ b/board/freescale/common/ns_access.c
@@ -8,29 +8,63 @@
#include <asm/io.h>
#include <fsl_csu.h>
#include <asm/arch/ns_access.h>
+#include <asm/arch/fsl_serdes.h>
-static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+void set_devices_ns_access(struct csu_ns_dev *ns_dev, u16 val)
{
u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
u32 *reg;
- uint32_t val;
+ uint32_t tmp;
+
+ reg = base + ns_dev->ind / 2;
+ tmp = in_be32(reg);
+ if (ns_dev->ind % 2 == 0) {
+ tmp &= 0x0000ffff;
+ tmp |= val << 16;
+ } else {
+ tmp &= 0xffff0000;
+ tmp |= val;
+ }
+
+ out_be32(reg, tmp);
+}
+
+static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+{
int i;
- for (i = 0; i < num; i++) {
- reg = base + ns_dev[i].ind / 2;
- val = in_be32(reg);
- if (ns_dev[i].ind % 2 == 0) {
- val &= 0x0000ffff;
- val |= ns_dev[i].val << 16;
- } else {
- val &= 0xffff0000;
- val |= ns_dev[i].val;
- }
- out_be32(reg, val);
- }
+ for (i = 0; i < num; i++)
+ set_devices_ns_access(ns_dev + i, ns_dev[i].val);
}
void enable_layerscape_ns_access(void)
{
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
}
+
+void set_pcie_ns_access(int pcie, u16 val)
+{
+ switch (pcie) {
+#ifdef CONFIG_PCIE1
+ case PCIE1:
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE1], val);
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE1_IO], val);
+ return;
+#endif
+#ifdef CONFIG_PCIE2
+ case PCIE2:
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE2], val);
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE2_IO], val);
+ return;
+#endif
+#ifdef CONFIG_PCIE3
+ case PCIE3:
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE3], val);
+ set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE3_IO], val);
+ return;
+#endif
+ default:
+ debug("The PCIE%d doesn't exist!\n", pcie);
+ return;
+ }
+}
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 2f29795..1a50304 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -8,7 +8,7 @@
#include <command.h>
#include <i2c.h>
#include <asm/io.h>
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_FSL_LSCH2
#include <asm/arch/immap_lsch2.h>
#elif defined(CONFIG_FSL_LSCH3)
#include <asm/arch/immap_lsch3.h>
@@ -247,7 +247,7 @@
* SoC before converting into an IR VID value
*/
vdd += board_vdd_drop_compensation();
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_FSL_LSCH2
vid = DIV_ROUND_UP(vdd - 265, 5);
#else
vid = DIV_ROUND_UP(vdd - 245, 5);
@@ -287,7 +287,7 @@
int adjust_vdd(ulong vdd_override)
{
int re_enable = disable_interrupts();
-#if defined(CONFIG_LS1043A) || defined(CONFIG_FSL_LSCH3)
+#if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3)
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
#else
ccsr_gur_t __iomem *gur =
@@ -386,7 +386,7 @@
* | T | | | | |
* ------------------------------------------------------
*/
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_FSL_LSCH2
vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) {
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index a94a458..b03bdb8 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -11,27 +11,12 @@
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <hwconfig.h>
-#include <fsl_csu.h>
#include <environment.h>
#include <fsl_mmdc.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
puts("Board: LS1012AFRDM ");
@@ -39,111 +24,25 @@
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
- mmdc_init();
+ static const struct fsl_mmdc_info mparam = {
+ 0x04180000, /* mdctl */
+ 0x00030035, /* mdpdc */
+ 0x12554000, /* mdotc */
+ 0xbabf7954, /* mdcfg0 */
+ 0xdb328f64, /* mdcfg1 */
+ 0x01ff00db, /* mdcfg2 */
+ 0x00001680, /* mdmisc */
+ 0x0f3c8000, /* mdref */
+ 0x00002000, /* mdrwd */
+ 0x00bf1023, /* mdor */
+ 0x0000003f, /* mdasp */
+ 0x0000022a, /* mpodtctrl */
+ 0xa1390003, /* mpzqhwctrl */
+ };
+
+ mmdc_init(&mparam);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
@@ -175,10 +74,6 @@
gd->env_addr = (ulong)&default_environment[0];
#endif
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
-
return 0;
}
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 71eea82..94440b3 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -17,7 +17,6 @@
#include <mmc.h>
#include <scsi.h>
#include <fm_eth.h>
-#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_mmdc.h>
#include <spl.h>
@@ -28,20 +27,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
char buf[64];
@@ -67,111 +52,25 @@
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
- mmdc_init();
+ static const struct fsl_mmdc_info mparam = {
+ 0x05180000, /* mdctl */
+ 0x00030035, /* mdpdc */
+ 0x12554000, /* mdotc */
+ 0xbabf7954, /* mdcfg0 */
+ 0xdb328f64, /* mdcfg1 */
+ 0x01ff00db, /* mdcfg2 */
+ 0x00001680, /* mdmisc */
+ 0x0f3c8000, /* mdref */
+ 0x00002000, /* mdrwd */
+ 0x00bf1023, /* mdor */
+ 0x0000003f, /* mdasp */
+ 0x0000022a, /* mpodtctrl */
+ 0xa1390003, /* mpzqhwctrl */
+ };
+
+ mmdc_init(&mparam);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
@@ -207,8 +106,8 @@
out_le32(&cci->ctrl_ord,
CCI400_CTRLORD_EN_BARRIER);
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
#endif
#ifdef CONFIG_ENV_IS_NOWHERE
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index f69768d..778434d 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -14,7 +14,6 @@
#include <ahci.h>
#include <mmc.h>
#include <scsi.h>
-#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <environment.h>
#include <fsl_mmdc.h>
@@ -22,20 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
u8 in1;
@@ -71,111 +56,25 @@
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
- mmdc_init();
+ static const struct fsl_mmdc_info mparam = {
+ 0x05180000, /* mdctl */
+ 0x00030035, /* mdpdc */
+ 0x12554000, /* mdotc */
+ 0xbabf7954, /* mdcfg0 */
+ 0xdb328f64, /* mdcfg1 */
+ 0x01ff00db, /* mdcfg2 */
+ 0x00001680, /* mdmisc */
+ 0x0f3c8000, /* mdref */
+ 0x00002000, /* mdrwd */
+ 0x00bf1023, /* mdor */
+ 0x0000003f, /* mdasp */
+ 0x0000022a, /* mpodtctrl */
+ 0xa1390003, /* mpzqhwctrl */
+ };
+
+ mmdc_init(&mparam);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
@@ -203,12 +102,12 @@
*/
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
#endif
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
#endif
return 0;
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index dbea0bf..4eb38a7 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -430,6 +430,10 @@
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
unsigned int major;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
+#endif
+
major = get_soc_major_rev();
if (major == SOC_MAJOR_VER_1_0) {
/* Set CCI-400 control override register to
@@ -446,10 +450,6 @@
ls102xa_smmu_stream_id_init();
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
-
#ifdef CONFIG_U_QE
u_qe_init();
#endif
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 77482a9..d96fd77 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -142,7 +142,7 @@
void ddrmc_init(void)
{
struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR;
- u32 temp_sdram_cfg;
+ u32 temp_sdram_cfg, tmp;
out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG);
@@ -189,6 +189,11 @@
out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL);
out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2);
+
+ /* DDR erratum A-009942 */
+ tmp = in_be32(&ddr->debug[28]);
+ out_be32(&ddr->debug[28], tmp | 0x0070006f);
+
udelay(1);
#ifdef CONFIG_DEEP_SLEEP
@@ -480,6 +485,10 @@
int board_init(void)
{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
+#endif
+
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
@@ -489,10 +498,6 @@
ls102xa_smmu_stream_id_init();
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
-
#ifdef CONFIG_U_QE
u_qe_init();
#endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 941dfbc..8835a49 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -17,7 +17,6 @@
#include <mmc.h>
#include <scsi.h>
#include <fm_eth.h>
-#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <spl.h>
@@ -309,6 +308,10 @@
int board_init(void)
{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
+#endif
+
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
board_retimer_init();
@@ -316,9 +319,6 @@
config_serdes_mux();
#endif
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
return 0;
}
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index d3e37b4..e213128 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -16,7 +16,6 @@
#include <mmc.h>
#include <scsi.h>
#include <fm_eth.h>
-#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <fsl_sec.h>
@@ -86,12 +85,29 @@
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+ erratum_a010315();
+#endif
+
#ifdef CONFIG_FSL_IFC
init_final_memctl_regs();
#endif
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
+#ifdef CONFIG_SECURE_BOOT
+ /* In case of Secure Boot, the IBR configures the SMMU
+ * to allow only Secure transactions.
+ * SMMU must be reset in bypass mode.
+ * Set the ClientPD bit and Clear the USFCFG Bit
+ */
+ u32 val;
+ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_SCR0, val);
+ val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_NSCR0, val);
+#endif
+
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
#endif
#ifdef CONFIG_FSL_LS_PPA
@@ -137,21 +153,6 @@
int misc_init_r(void)
{
config_board_mux();
-#ifdef CONFIG_SECURE_BOOT
- /* In case of Secure Boot, the IBR configures the SMMU
- * to allow only Secure transactions.
- * SMMU must be reset in bypass mode.
- * Set the ClientPD bit and Clear the USFCFG Bit
- */
- u32 val;
- val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
- out_le32(SMMU_SCR0, val);
- val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
- out_le32(SMMU_NSCR0, val);
-#endif
-#ifdef CONFIG_FSL_CAAM
- return sec_init();
-#endif
return 0;
}
#endif
diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig
new file mode 100644
index 0000000..723f4ba
--- /dev/null
+++ b/board/freescale/ls1046aqds/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1046AQDS
+
+config SYS_BOARD
+ default "ls1046aqds"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1046aqds"
+
+endif
diff --git a/board/freescale/ls1046aqds/MAINTAINERS b/board/freescale/ls1046aqds/MAINTAINERS
new file mode 100644
index 0000000..b4549ae
--- /dev/null
+++ b/board/freescale/ls1046aqds/MAINTAINERS
@@ -0,0 +1,10 @@
+LS1046AQDS BOARD
+M: Mingkai Hu <Mingkai.Hu@nxp.com>
+S: Maintained
+F: board/freescale/ls1046aqds/
+F: include/configs/ls1046aqds.h
+F: configs/ls1046aqds_defconfig
+F: configs/ls1046aqds_nand_defconfig
+F: configs/ls1046aqds_sdcard_ifc_defconfig
+F: configs/ls1046aqds_sdcard_qspi_defconfig
+F: configs/ls1046aqds_qspi_defconfig
diff --git a/board/freescale/ls1046aqds/Makefile b/board/freescale/ls1046aqds/Makefile
new file mode 100644
index 0000000..df6e546
--- /dev/null
+++ b/board/freescale/ls1046aqds/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ddr.o
+obj-y += eth.o
+obj-y += ls1046aqds.o
diff --git a/board/freescale/ls1046aqds/README b/board/freescale/ls1046aqds/README
new file mode 100644
index 0000000..b8fa326
--- /dev/null
+++ b/board/freescale/ls1046aqds/README
@@ -0,0 +1,70 @@
+Overview
+--------
+The LS1046A Development System (QDS) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS1046A
+LayerScape Architecture processor. The LS1046AQDS provides SW development
+platform for the Freescale LS1046A processor series, with a complete
+debugging environment.
+
+LS1046A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
+SoC overview.
+
+ LS1046AQDS board Overview
+ -----------------------
+ - SERDES Connections, 8 lanes supporting:
+ - PCI Express - 3.0
+ - SGMII, SGMII 2.5
+ - QSGMII
+ - SATA 3.0
+ - XFI
+ - DDR Controller
+ - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
+ -IFC/Local Bus
+ - One in-socket 128 MB NOR flash 16-bit data bus
+ - One 512 MB NAND flash with ECC support
+ - PromJet Port
+ - FPGA connection
+ - USB 3.0
+ - Three high speed USB 3.0 ports
+ - First USB 3.0 port configured as Host with Type-A connector
+ - The other two USB 3.0 ports configured as OTG with micro-AB connector
+ - SDHC port connects directly to an adapter card slot, featuring:
+ - Optional clock feedback paths, and optional high-speed voltage translation assistance
+ - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
+ - eMMC memory devices
+ - DSPI: Onboard support for three SPI flash memory devices
+ - 4 I2C controllers
+ - One SATA onboard connectors
+ - UART
+ - Two 4-pin serial ports at up to 115.2 Kbit/s
+ - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+Start Address End Address Description Size
+0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
+0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
+0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
+0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
+0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
+0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB
+0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
+0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - FPGA 4KB
+0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
+0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
+0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
+0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
+0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
+0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
+0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
+
+Booting Options
+---------------
+a) Promjet Boot
+b) NOR boot
+c) NAND boot
+d) SD boot
+e) QSPI boot
diff --git a/board/freescale/ls1046aqds/ddr.c b/board/freescale/ls1046aqds/ddr.c
new file mode 100644
index 0000000..d813965
--- /dev/null
+++ b/board/freescale/ls1046aqds/ddr.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#ifdef CONFIG_FSL_DEEP_SLEEP
+#include <fsl_sleep.h>
+#endif
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 3) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ pbsp = udimms[0];
+
+ /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found for %lu MT/s\n",
+ ddr_freq);
+ printf("Trying to use the highest speed (%u) parameters\n",
+ pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+
+ popts->data_bus_width = 0; /* 64b data bus */
+ popts->otf_burst_chop_en = 0;
+ popts->burst_length = DDR_BL8;
+ popts->bstopre = 0; /* enable auto precharge */
+
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+ DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ return fsl_ddr_sdram_size();
+#else
+ puts("Initializing DDR....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+#endif
+
+#ifdef CONFIG_FSL_DEEP_SLEEP
+ fsl_dp_ddr_restore();
+#endif
+
+ erratum_a008850_post();
+
+ return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+ /*
+ * gd->arch.secure_ram tracks the location of secure memory.
+ * It was set as if the memory starts from 0.
+ * The address needs to add the offset of its bank.
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ }
+}
diff --git a/board/freescale/ls1046aqds/ddr.h b/board/freescale/ls1046aqds/ddr.h
new file mode 100644
index 0000000..b594032
--- /dev/null
+++ b/board/freescale/ls1046aqds/ddr.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+
+void erratum_a008850_post(void);
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
+ */
+ {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,},
+ {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2300, 0, 8, 9, 0x0A0C0D11, 0x1214150E,},
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+#endif
diff --git a/board/freescale/ls1046aqds/eth.c b/board/freescale/ls1046aqds/eth.c
new file mode 100644
index 0000000..046db11
--- /dev/null
+++ b/board/freescale/ls1046aqds/eth.c
@@ -0,0 +1,415 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fdt_support.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <fsl_dtsec.h>
+#include <malloc.h>
+#include <asm/arch/fsl_serdes.h>
+
+#include "../common/qixis.h"
+#include "../common/fman.h"
+#include "ls1046aqds_qixis.h"
+
+#define EMI_NONE 0xFF
+#define EMI1_RGMII1 0
+#define EMI1_RGMII2 1
+#define EMI1_SLOT1 2
+#define EMI1_SLOT2 3
+#define EMI1_SLOT4 4
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+ "LS1046AQDS_MDIO_RGMII1",
+ "LS1046AQDS_MDIO_RGMII2",
+ "LS1046AQDS_MDIO_SLOT1",
+ "LS1046AQDS_MDIO_SLOT2",
+ "LS1046AQDS_MDIO_SLOT4",
+ "NULL",
+};
+
+/* Map SerDes 1 & 2 lanes to default slot. */
+static u8 lane_to_slot[] = {1, 1, 1, 1, 0, 4, 0 , 0};
+
+static const char *ls1046aqds_mdio_name_for_muxval(u8 muxval)
+{
+ return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+ struct mii_dev *bus;
+ const char *name;
+
+ if (muxval > EMI1_SLOT4)
+ return NULL;
+
+ name = ls1046aqds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+struct ls1046aqds_mdio {
+ u8 muxval;
+ struct mii_dev *realbus;
+};
+
+static void ls1046aqds_mux_mdio(u8 muxval)
+{
+ u8 brdcfg4;
+
+ if (muxval < 7) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+ brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+ }
+}
+
+static int ls1046aqds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct ls1046aqds_mdio *priv = bus->priv;
+
+ ls1046aqds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int ls1046aqds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct ls1046aqds_mdio *priv = bus->priv;
+
+ ls1046aqds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad,
+ regnum, value);
+}
+
+static int ls1046aqds_mdio_reset(struct mii_dev *bus)
+{
+ struct ls1046aqds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int ls1046aqds_mdio_init(char *realbusname, u8 muxval)
+{
+ struct ls1046aqds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate ls1046aqds MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate ls1046aqds private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = ls1046aqds_mdio_read;
+ bus->write = ls1046aqds_mdio_write;
+ bus->reset = ls1046aqds_mdio_reset;
+ sprintf(bus->name, ls1046aqds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+ return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ struct fixed_link f_link;
+
+ if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+ switch (port) {
+ case FM1_DTSEC9:
+ fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p1");
+ break;
+ case FM1_DTSEC10:
+ fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p2");
+ break;
+ case FM1_DTSEC5:
+ fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p3");
+ break;
+ case FM1_DTSEC6:
+ fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p4");
+ break;
+ case FM1_DTSEC2:
+ fdt_set_phy_handle(fdt, compat, addr, "sgmii_s4_p1");
+ break;
+ default:
+ break;
+ }
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) {
+ /* 2.5G SGMII interface */
+ f_link.phy_id = cpu_to_fdt32(port);
+ f_link.duplex = cpu_to_fdt32(1);
+ f_link.link_speed = cpu_to_fdt32(1000);
+ f_link.pause = 0;
+ f_link.asym_pause = 0;
+ /* no PHY for 2.5G SGMII on QDS */
+ fdt_delprop(fdt, offset, "phy-handle");
+ fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
+ fdt_setprop_string(fdt, offset, "phy-connection-type",
+ "sgmii-2500");
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_QSGMII) {
+ switch (port) {
+ case FM1_DTSEC1:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p4");
+ break;
+ case FM1_DTSEC5:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p2");
+ break;
+ case FM1_DTSEC6:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p1");
+ break;
+ case FM1_DTSEC10:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p3");
+ break;
+ default:
+ break;
+ }
+ fdt_delprop(fdt, offset, "phy-connection-type");
+ fdt_setprop_string(fdt, offset, "phy-connection-type",
+ "qsgmii");
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII &&
+ (port == FM1_10GEC1 || port == FM1_10GEC2)) {
+ /* XFI interface */
+ f_link.phy_id = cpu_to_fdt32(port);
+ f_link.duplex = cpu_to_fdt32(1);
+ f_link.link_speed = cpu_to_fdt32(10000);
+ f_link.pause = 0;
+ f_link.asym_pause = 0;
+ /* no PHY for XFI */
+ fdt_delprop(fdt, offset, "phy-handle");
+ fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
+ fdt_setprop_string(fdt, offset, "phy-connection-type", "xgmii");
+ }
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+ int i;
+
+ for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ switch (mdio_mux[i]) {
+ case EMI1_SLOT1:
+ fdt_status_okay_by_alias(fdt, "emi1_slot1");
+ break;
+ case EMI1_SLOT2:
+ fdt_status_okay_by_alias(fdt, "emi1_slot2");
+ break;
+ case EMI1_SLOT4:
+ fdt_status_okay_by_alias(fdt, "emi1_slot4");
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ int i, idx, lane, slot, interface;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 srds_s1, srds_s2;
+ u8 brdcfg12;
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ srds_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
+ srds_s2 >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ /* Register the muxing front-ends to the MDIO buses */
+ ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+ ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+ ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+ ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+ ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+
+ /* Set the two on-board RGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+ switch (srds_s1) {
+ case 0x3333:
+ /* SGMII on slot 1, MAC 9 */
+ fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+ case 0x1333:
+ case 0x2333:
+ /* SGMII on slot 1, MAC 10 */
+ fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+ case 0x1133:
+ case 0x2233:
+ /* SGMII on slot 1, MAC 5/6 */
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ case 0x1040:
+ case 0x2040:
+ /* QSGMII on lane B, MAC 6/5/10/1 */
+ fm_info_set_phy_address(FM1_DTSEC6,
+ QSGMII_CARD_PORT1_PHY_ADDR_S2);
+ fm_info_set_phy_address(FM1_DTSEC5,
+ QSGMII_CARD_PORT2_PHY_ADDR_S2);
+ fm_info_set_phy_address(FM1_DTSEC10,
+ QSGMII_CARD_PORT3_PHY_ADDR_S2);
+ fm_info_set_phy_address(FM1_DTSEC1,
+ QSGMII_CARD_PORT4_PHY_ADDR_S2);
+ break;
+ case 0x3363:
+ /* SGMII on slot 1, MAC 9/10 */
+ fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+ case 0x1163:
+ case 0x2263:
+ case 0x2223:
+ /* SGMII on slot 1, MAC 6 */
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ default:
+ printf("Invalid SerDes protocol 0x%x for LS1046AQDS\n",
+ srds_s1);
+ break;
+ }
+
+ if (srds_s2 == 0x5a59 || srds_s2 == 0x5a06)
+ /* SGMII on slot 4, MAC 2 */
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ idx = i - FM1_DTSEC1;
+ interface = fm_info_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ if (interface == PHY_INTERFACE_MODE_SGMII) {
+ if (i == FM1_DTSEC5) {
+ /* route lane 2 to slot1 so to have
+ * one sgmii riser card supports
+ * MAC5 and MAC6.
+ */
+ brdcfg12 = QIXIS_READ(brdcfg[12]);
+ QIXIS_WRITE(brdcfg[12],
+ brdcfg12 | 0x80);
+ }
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+ } else {
+ /* clear the bit 7 to route lane B on slot2. */
+ brdcfg12 = QIXIS_READ(brdcfg[12]);
+ QIXIS_WRITE(brdcfg[12], brdcfg12 & 0x7f);
+
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ QSGMII_FM1_A);
+ lane_to_slot[lane] = 2;
+ }
+
+ if (i == FM1_DTSEC2)
+ lane = 5;
+
+ if (lane < 0)
+ break;
+
+ slot = lane_to_slot[lane];
+ debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+
+ switch (slot) {
+ case 1:
+ mdio_mux[i] = EMI1_SLOT1;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ case 2:
+ mdio_mux[i] = EMI1_SLOT2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ case 4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if (i == FM1_DTSEC3)
+ mdio_mux[i] = EMI1_RGMII1;
+ else if (i == FM1_DTSEC4)
+ mdio_mux[i] = EMI1_RGMII2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
new file mode 100644
index 0000000..8c18538
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -0,0 +1,298 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/fdt.h>
+#include <asm/arch/soc.h>
+#include <ahci.h>
+#include <hwconfig.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fm_eth.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <fsl_ifc.h>
+#include <spl.h>
+
+#include "../common/vid.h"
+#include "../common/qixis.h"
+#include "ls1046aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ MUX_TYPE_GPIO,
+};
+
+int checkboard(void)
+{
+ char buf[64];
+#ifndef CONFIG_SD_BOOT
+ u8 sw;
+#endif
+
+ puts("Board: LS1046AQDS, boot from ");
+
+#ifdef CONFIG_SD_BOOT
+ puts("SD\n");
+#else
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("PromJet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else if (sw == 0xF)
+ printf("QSPI\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
+
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
+ QIXIS_READ(id), QIXIS_READ(arch));
+
+ printf("FPGA: v%d (%s), build %d\n",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+
+ return 0;
+}
+
+bool if_board_diff_clk(void)
+{
+ u8 diff_conf = QIXIS_READ(brdcfg[11]);
+
+ return diff_conf & 0x40;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0f) {
+ case QIXIS_SYSCLK_64:
+ return 64000000;
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ if (if_board_diff_clk())
+ return get_board_sys_clk();
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+
+ return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ /*
+ * When resuming from deep sleep, the I2C channel may not be
+ * in the default channel. So, switch to the default channel
+ * before accessing DDR SPD.
+ */
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ gd->ram_size = initdram(0);
+
+ return 0;
+}
+
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+ return select_i2c_ch_pca9547(channel);
+}
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ u32 usb_pwrfault;
+#endif
+
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+ i2c_early_init_f();
+#endif
+ fsl_lsch2_early_init_f();
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ out_be32(&scfg->rcwpmuxcr0, 0x3333);
+ out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+ usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED <<
+ SCFG_USBPWRFAULT_USB1_SHIFT);
+ out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_DEEP_SLEEP
+/* determine if it is a warm boot */
+bool is_warm_boot(void)
+{
+#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+ if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
+ return 1;
+
+ return 0;
+}
+#endif
+
+int config_board_mux(int ctrl_type)
+{
+ u8 reg14;
+
+ reg14 = QIXIS_READ(brdcfg[14]);
+
+ switch (ctrl_type) {
+ case MUX_TYPE_GPIO:
+ reg14 = (reg14 & (~0x6)) | 0x2;
+ break;
+ default:
+ puts("Unsupported mux interface type\n");
+ return -1;
+ }
+
+ QIXIS_WRITE(brdcfg[14], reg14);
+
+ return 0;
+}
+
+int config_serdes_mux(void)
+{
+ return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ if (hwconfig("gpio"))
+ config_board_mux(MUX_TYPE_GPIO);
+
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+#ifdef CONFIG_SYS_FSL_SERDES
+ config_serdes_mux();
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+ u8 reg;
+
+ /* fixup DT for the two DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
+ ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+
+ reg = QIXIS_READ(brdcfg[0]);
+ reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ /* Disable IFC if QSPI is enabled */
+ if (reg == 0xF)
+ do_fixup_by_compat(blob, "fsl,ifc",
+ "status", "disabled", 8 + 1, 1);
+
+ return 0;
+}
+#endif
+
+u8 flash_read8(void *addr)
+{
+ return __raw_readb(addr + 1);
+}
+
+void flash_write16(u16 val, void *addr)
+{
+ u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+
+ __raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+ u16 val = __raw_readw(addr);
+
+ return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
diff --git a/board/freescale/ls1046aqds/ls1046aqds_pbi.cfg b/board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
new file mode 100644
index 0000000..5a6b7b8
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
@@ -0,0 +1,17 @@
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Alt base register
+09570158 00001000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#Serdes SATA
+09eb1300 80104e20
+09eb08dc 00502880
+#flush PBI data
+096100c0 000fffff
diff --git a/board/freescale/ls1046aqds/ls1046aqds_qixis.h b/board/freescale/ls1046aqds/ls1046aqds_qixis.h
new file mode 100644
index 0000000..58ab132
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds_qixis.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1046AQDS_QIXIS_H__
+#define __LS1046AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1046AQDS */
+
+/* BRDCFG4[4:7] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK 0xe0
+#define BRDCFG4_EMISEL_SHIFT 5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+#define QIXIS_SYSCLK_64 0x8
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+/* BRDCFG2 - SD clock*/
+#define QIXIS_SDCLK1_100 0x0
+#define QIXIS_SDCLK1_125 0x1
+#define QIXIS_SDCLK1_165 0x2
+#define QIXIS_SDCLK1_100_SP 0x3
+
+#endif
diff --git a/board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg b/board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
new file mode 100644
index 0000000..b5fc08c
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+0c150010 0e000000 00000000 00000000
+11335559 40005012 e0116000 c1000000
+00000000 00000000 00000000 00038800
+00000000 01001101 00000096 00000001
diff --git a/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg b/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
new file mode 100644
index 0000000..59d24d6
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+# Enable IFC; disable QSPI
+0c150010 0e000000 00000000 00000000
+11335559 40005012 60040000 c1000000
+00000000 00000000 00000000 00038800
+00000000 01001101 00000096 00000001
diff --git a/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg b/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
new file mode 100644
index 0000000..9401a6f
--- /dev/null
+++ b/board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+# Enable QSPI; disable IFC
+0c150010 0e000000 00000000 00000000
+11335559 40005012 60040000 c1000000
+00000000 00000000 00000000 00038800
+20124000 01001101 00000096 00000001
diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig
new file mode 100644
index 0000000..a62255c
--- /dev/null
+++ b/board/freescale/ls1046ardb/Kconfig
@@ -0,0 +1,16 @@
+
+if TARGET_LS1046ARDB
+
+config SYS_BOARD
+ default "ls1046ardb"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1046ardb"
+
+endif
diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS
new file mode 100644
index 0000000..ff42bef
--- /dev/null
+++ b/board/freescale/ls1046ardb/MAINTAINERS
@@ -0,0 +1,9 @@
+LS1046A BOARD
+M: Mingkai Hu <mingkai.hu@nxp.com>
+S: Maintained
+F: board/freescale/ls1046ardb/
+F: board/freescale/ls1046ardb/ls1046ardb.c
+F: include/configs/ls1046ardb.h
+F: configs/ls1046ardb_qspi_defconfig
+F: configs/ls1046ardb_sdcard_defconfig
+F: configs/ls1046ardb_emmc_defconfig
diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile
new file mode 100644
index 0000000..348eb76
--- /dev/null
+++ b/board/freescale/ls1046ardb/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright 2016 Freescale Semiconductor
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cpld.o
+obj-y += ddr.o
+obj-y += ls1046ardb.o
+obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o
diff --git a/board/freescale/ls1046ardb/README b/board/freescale/ls1046ardb/README
new file mode 100644
index 0000000..1ef7d47
--- /dev/null
+++ b/board/freescale/ls1046ardb/README
@@ -0,0 +1,76 @@
+Overview
+--------
+The LS1046A Reference Design Board (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS1046A
+LayerScape Architecture processor. The LS1046ARDB provides SW development
+platform for the Freescale LS1046A processor series, with a complete
+debugging environment. The LS1046A RDB is lead-free and RoHS-compliant.
+
+LS1046A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
+SoC overview.
+
+ LS1046ARDB board Overview
+ -----------------------
+ - SERDES1 Connections, 4 lanes supporting:
+ - Lane0: XFI with x1 RJ45 connector
+ - Lane1: XFI Cage
+ - Lane2: SGMII.5
+ - Lane3: SGMII.6
+ - SERDES2 Connections, 4 lanes supporting:
+ - Lane0: PCIe1 with miniPCIe slot
+ - Lane1: PCIe2 with PCIe x2 slot
+ - Lane2: PCIe3 with PCIe x4 slot
+ - Lane3: SATA
+ - DDR Controller
+ - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
+ -IFC/Local Bus
+ - One 512 MB NAND flash with ECC support
+ - CPLD connection
+ - USB 3.0
+ - one Type A port, one Micro-AB port
+ - SDHC: connects directly to a full SD/MMC slot
+ - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 4 I2C controllers
+ - UART
+ - Two 4-pin serial ports at up to 115.2 Kbit/s
+ - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+Start Address End Address Description Size
+0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
+0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
+0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
+0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
+0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
+0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
+0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB
+0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
+0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
+0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
+0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
+0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
+0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
+0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
+
+QSPI flash map:
+Start Address End Address Description Size
+0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB
+0x00_4010_0000 - 0x00_401F_FFFF U-Boot 1MB
+0x00_4020_0000 - 0x00_402F_FFFF U-Boot Env 1MB
+0x00_4030_0000 - 0x00_403F_FFFF FMan ucode 1MB
+0x00_4040_0000 - 0x00_404F_FFFF UEFI 1MB
+0x00_4050_0000 - 0x00_406F_FFFF PPA 2MB
+0x00_4070_0000 - 0x00_408F_FFFF Secure boot header
+ + bootscript 2MB
+0x00_4090_0000 - 0x00_40FF_FFFF Reserved 7MB
+0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB
+
+Booting Options
+---------------
+a) QSPI boot
+b) SD boot
+c) eMMC boot
diff --git a/board/freescale/ls1046ardb/cpld.c b/board/freescale/ls1046ardb/cpld.c
new file mode 100644
index 0000000..81a646e
--- /dev/null
+++ b/board/freescale/ls1046ardb/cpld.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Freescale LS1046ARDB board-specific CPLD controlling supports.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include "cpld.h"
+
+u8 cpld_read(unsigned int reg)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ return in_8(p + reg);
+}
+
+void cpld_write(unsigned int reg, u8 value)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ out_8(p + reg, value);
+}
+
+/* Set the boot bank to the alternate bank */
+void cpld_set_altbank(void)
+{
+ u16 reg = CPLD_CFG_RCW_SRC_QSPI;
+ u8 reg4 = CPLD_READ(soft_mux_on);
+ u8 reg5 = (u8)(reg >> 1);
+ u8 reg6 = (u8)(reg & 1);
+ u8 reg7 = CPLD_READ(vbank);
+
+ cpld_rev_bit(®5);
+
+ CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+ CPLD_WRITE(cfg_rcw_src1, reg5);
+ CPLD_WRITE(cfg_rcw_src2, reg6);
+
+ reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
+ CPLD_WRITE(vbank, reg7);
+
+ CPLD_WRITE(system_rst, 1);
+}
+
+/* Set the boot bank to the default bank */
+void cpld_set_defbank(void)
+{
+ u16 reg = CPLD_CFG_RCW_SRC_QSPI;
+ u8 reg4 = CPLD_READ(soft_mux_on);
+ u8 reg5 = (u8)(reg >> 1);
+ u8 reg6 = (u8)(reg & 1);
+
+ cpld_rev_bit(®5);
+
+ CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+ CPLD_WRITE(cfg_rcw_src1, reg5);
+ CPLD_WRITE(cfg_rcw_src2, reg6);
+
+ CPLD_WRITE(vbank, 0);
+
+ CPLD_WRITE(system_rst, 1);
+}
+
+void cpld_set_sd(void)
+{
+ u16 reg = CPLD_CFG_RCW_SRC_SD;
+ u8 reg5 = (u8)(reg >> 1);
+ u8 reg6 = (u8)(reg & 1);
+
+ cpld_rev_bit(®5);
+
+ CPLD_WRITE(soft_mux_on, 1);
+
+ CPLD_WRITE(cfg_rcw_src1, reg5);
+ CPLD_WRITE(cfg_rcw_src2, reg6);
+
+ CPLD_WRITE(system_rst, 1);
+}
+#ifdef DEBUG
+static void cpld_dump_regs(void)
+{
+ printf("cpld_ver = %x\n", CPLD_READ(cpld_ver));
+ printf("cpld_ver_sub = %x\n", CPLD_READ(cpld_ver_sub));
+ printf("pcba_ver = %x\n", CPLD_READ(pcba_ver));
+ printf("soft_mux_on = %x\n", CPLD_READ(soft_mux_on));
+ printf("cfg_rcw_src1 = %x\n", CPLD_READ(cfg_rcw_src1));
+ printf("cfg_rcw_src2 = %x\n", CPLD_READ(cfg_rcw_src2));
+ printf("vbank = %x\n", CPLD_READ(vbank));
+ printf("sysclk_sel = %x\n", CPLD_READ(sysclk_sel));
+ printf("uart_sel = %x\n", CPLD_READ(uart_sel));
+ printf("sd1refclk_sel = %x\n", CPLD_READ(sd1refclk_sel));
+ printf("rgmii_1588_sel = %x\n", CPLD_READ(rgmii_1588_sel));
+ printf("1588_clk_sel = %x\n", CPLD_READ(reg_1588_clk_sel));
+ printf("status_led = %x\n", CPLD_READ(status_led));
+ printf("sd_emmc = %x\n", CPLD_READ(sd_emmc));
+ printf("vdd_en = %x\n", CPLD_READ(vdd_en));
+ printf("vdd_sel = %x\n", CPLD_READ(vdd_sel));
+ putc('\n');
+}
+#endif
+
+void cpld_rev_bit(unsigned char *value)
+{
+ u8 rev_val, val;
+ int i;
+
+ val = *value;
+ rev_val = val & 1;
+ for (i = 1; i <= 7; i++) {
+ val >>= 1;
+ rev_val <<= 1;
+ rev_val |= val & 1;
+ }
+
+ *value = rev_val;
+}
+
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int rc = 0;
+
+ if (argc <= 1)
+ return cmd_usage(cmdtp);
+
+ if (strcmp(argv[1], "reset") == 0) {
+ if (strcmp(argv[2], "altbank") == 0)
+ cpld_set_altbank();
+ else if (strcmp(argv[2], "sd") == 0)
+ cpld_set_sd();
+ else
+ cpld_set_defbank();
+#ifdef DEBUG
+ } else if (strcmp(argv[1], "dump") == 0) {
+ cpld_dump_regs();
+#endif
+ } else {
+ rc = cmd_usage(cmdtp);
+ }
+
+ return rc;
+}
+
+U_BOOT_CMD(
+ cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
+ "Reset the board or alternate bank",
+ "reset: reset to default bank\n"
+ "cpld reset altbank: reset to alternate bank\n"
+ "cpld reset sd: reset to boot from SD card\n"
+#ifdef DEBUG
+ "cpld dump - display the CPLD registers\n"
+#endif
+);
diff --git a/board/freescale/ls1046ardb/cpld.h b/board/freescale/ls1046ardb/cpld.h
new file mode 100644
index 0000000..458da7e
--- /dev/null
+++ b/board/freescale/ls1046ardb/cpld.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CPLD_H__
+#define __CPLD_H__
+
+/*
+ * CPLD register set of LS1046ARDB board-specific.
+ * CPLD Revision: V2.1
+ */
+struct cpld_data {
+ u8 cpld_ver; /* 0x0 - CPLD Major Revision Register */
+ u8 cpld_ver_sub; /* 0x1 - CPLD Minor Revision Register */
+ u8 pcba_ver; /* 0x2 - PCBA Revision Register */
+ u8 system_rst; /* 0x3 - system reset register */
+ u8 soft_mux_on; /* 0x4 - Switch Control Enable Register */
+ u8 cfg_rcw_src1; /* 0x5 - RCW Source Location POR Regsiter 1 */
+ u8 cfg_rcw_src2; /* 0x6 - RCW Source Location POR Regsiter 2 */
+ u8 vbank; /* 0x7 - QSPI Flash Bank Setting Register */
+ u8 sysclk_sel; /* 0x8 - System clock POR Register */
+ u8 uart_sel; /* 0x9 - UART1 Connection Control Register */
+ u8 sd1refclk_sel; /* 0xA - */
+ u8 rgmii_1588_sel; /* 0xB - */
+ u8 reg_1588_clk_sel; /* 0xC - */
+ u8 status_led; /* 0xD - */
+ u8 global_rst; /* 0xE - */
+ u8 sd_emmc; /* 0xF - SD/EMMC Interface Control Regsiter */
+ u8 vdd_en; /* 0x10 - VDD Voltage Control Enable Register */
+ u8 vdd_sel; /* 0x11 - VDD Voltage Control Register */
+};
+
+u8 cpld_read(unsigned int reg);
+void cpld_write(unsigned int reg, u8 value);
+void cpld_rev_bit(unsigned char *value);
+
+#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
+#define CPLD_WRITE(reg, value) \
+ cpld_write(offsetof(struct cpld_data, reg), value)
+
+/* CPLD on IFC */
+#define CPLD_SW_MUX_BANK_SEL 0x40
+#define CPLD_BANK_SEL_MASK 0x07
+#define CPLD_BANK_SEL_ALTBANK 0x04
+#define CPLD_CFG_RCW_SRC_QSPI 0x044
+#define CPLD_CFG_RCW_SRC_SD 0x040
+#endif
diff --git a/board/freescale/ls1046ardb/ddr.c b/board/freescale/ls1046ardb/ddr.c
new file mode 100644
index 0000000..a9b7dbd
--- /dev/null
+++ b/board/freescale/ls1046ardb/ddr.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include "ddr.h"
+#ifdef CONFIG_FSL_DEEP_SLEEP
+#include <fsl_sleep.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 1) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ pbsp = udimms[0];
+
+ /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found for %lu MT/s\n",
+ ddr_freq);
+ printf("Trying to use the highest speed (%u) parameters\n",
+ pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+
+ popts->data_bus_width = 0; /* 64-bit data bus */
+ popts->otf_burst_chop_en = 0;
+ popts->burst_length = DDR_BL8;
+ popts->bstopre = 0; /* enable auto precharge */
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+ DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ return fsl_ddr_sdram_size();
+#else
+ puts("Initializing DDR....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+#endif
+
+ erratum_a008850_post();
+
+ return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+ /*
+ * gd->arch.secure_ram tracks the location of secure memory.
+ * It was set as if the memory starts from 0.
+ * The address needs to add the offset of its bank.
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ }
+}
diff --git a/board/freescale/ls1046ardb/ddr.h b/board/freescale/ls1046ardb/ddr.h
new file mode 100644
index 0000000..9e440f6
--- /dev/null
+++ b/board/freescale/ls1046ardb/ddr.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+
+void erratum_a008850_post(void);
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,},
+ {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2300, 0, 8, 9, 0x0A0B0C10, 0x1213140E,},
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+#endif
diff --git a/board/freescale/ls1046ardb/eth.c b/board/freescale/ls1046ardb/eth.c
new file mode 100644
index 0000000..ac8bbec
--- /dev/null
+++ b/board/freescale/ls1046ardb/eth.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_dtsec.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+
+#include "../common/fman.h"
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ int i;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ struct mii_dev *dev;
+ u32 srds_s1;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Set the two on-board RGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+ /* Set the two on-board SGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_PHY1_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_PHY2_ADDR);
+
+ /* Set the on-board AQ PHY address */
+ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+
+ switch (srds_s1) {
+ case 0x1133:
+ break;
+ default:
+ printf("Invalid SerDes protocol 0x%x for LS1046ARDB\n",
+ srds_s1);
+ break;
+ }
+
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++)
+ fm_info_set_mdio(i, dev);
+
+ /* XFI on lane A, MAC 9 */
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+ fm_info_set_mdio(FM1_10GEC1, dev);
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c
new file mode 100644
index 0000000..585c807
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <ahci.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fm_eth.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include "cpld.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
+ u8 cfg_rcw_src1, cfg_rcw_src2;
+ u16 cfg_rcw_src;
+ u8 sd1refclk_sel;
+
+ puts("Board: LS1046ARDB, boot from ");
+
+ cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
+ cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
+ cpld_rev_bit(&cfg_rcw_src1);
+ cfg_rcw_src = cfg_rcw_src1;
+ cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
+
+ if (cfg_rcw_src == 0x44)
+ printf("QSPI vBank %d\n", CPLD_READ(vbank));
+ else if (cfg_rcw_src == 0x40)
+ puts("SD\n");
+ else
+ puts("Invalid setting of SW5\n");
+
+ printf("CPLD: V%x.%x\nPCBA: V%x.0\n", CPLD_READ(cpld_ver),
+ CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
+
+ puts("SERDES Reference Clocks:\n");
+ sd1refclk_sel = CPLD_READ(sd1refclk_sel);
+ printf("SD1_CLK1 = %s, SD1_CLK2 = %s\n", freq[sd1refclk_sel], freq[0]);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ fsl_lsch2_early_init_f();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
+
+ /* invert AQR105 IRQ pins polarity */
+ out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
+
+ return 0;
+}
+
+void config_board_mux(void)
+{
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ u32 usb_pwrfault;
+
+ /* USB3 is not used, configure mux to IIC4_SCL/IIC4_SDA */
+ out_be32(&scfg->rcwpmuxcr0, 0x3300);
+ out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+ usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED <<
+ SCFG_USBPWRFAULT_USB1_SHIFT);
+ out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ config_board_mux();
+ return 0;
+}
+#endif
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ /* fixup DT for the two DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
+ ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+#endif
+
+ return 0;
+}
diff --git a/board/freescale/ls1046ardb/ls1046ardb_pbi.cfg b/board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
new file mode 100644
index 0000000..5478217
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
@@ -0,0 +1,22 @@
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#Serdes SATA
+09eb1300 80104e20
+09eb08dc 00502880
+#PEX gen3 link
+09570158 00000300
+89400890 01048000
+89500890 01048000
+89600890 01048000
+#Alt base register
+09570158 00001000
+#flush PBI data
+096100c0 000fffff
diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
new file mode 100644
index 0000000..6a5076e
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0c150010 0e000000 00000000 00000000
+11335559 40000012 60040000 c1000000
+00000000 00000000 00000000 00238800
+20124000 00003000 00000096 00000001
diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
new file mode 100644
index 0000000..d5265b8
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0c150010 0e000000 00000000 00000000
+11335559 40005012 60040000 c1000000
+00000000 00000000 00000000 00238800
+20124000 00003101 00000096 00000001
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 00337d7..d0a88d4 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -12,7 +12,6 @@
#include <asm/io.h>
#include <fdt_support.h>
#include <libfdt.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#include <environment.h>
#include <asm/arch/soc.h>
@@ -60,10 +59,6 @@
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
-#ifdef CONFIG_FSL_DEBUG_SERVER
- debug_server_init();
-#endif
-
return 0;
}
#endif
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 7d95deb..ca4a2e5 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -12,7 +12,6 @@
#include <asm/io.h>
#include <fdt_support.h>
#include <libfdt.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#include <environment.h>
#include <i2c.h>
@@ -265,9 +264,6 @@
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
-#ifdef CONFIG_FSL_DEBUG_SERVER
- debug_server_init();
-#endif
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index a65cd4ab..7d8a711 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -13,7 +13,6 @@
#include <hwconfig.h>
#include <fdt_support.h>
#include <libfdt.h>
-#include <fsl_debug_server.h>
#include <fsl-mc/fsl_mc.h>
#include <environment.h>
#include <i2c.h>
@@ -229,9 +228,6 @@
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
-#ifdef CONFIG_FSL_DEBUG_SERVER
- debug_server_init();
-#endif
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
new file mode 100644
index 0000000..71c3b95
--- /dev/null
+++ b/configs/ls1046aqds_defconfig
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
new file mode 100644
index 0000000..b29796d
--- /dev/null
+++ b/configs/ls1046aqds_nand_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL"
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
new file mode 100644
index 0000000..bdcb2d1
--- /dev/null
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -0,0 +1,31 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
new file mode 100644
index 0000000..044bd6e
--- /dev/null
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
new file mode 100644
index 0000000..cb8e635
--- /dev/null
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -0,0 +1,32 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AQDS=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
new file mode 100644
index 0000000..a1ee1ab
--- /dev/null
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -0,0 +1,27 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SYS_FSL_DDR4,EMMC_BOOT"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
new file mode 100644
index 0000000..67ef3ce
--- /dev/null
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
new file mode 100644
index 0000000..6272d75
--- /dev/null
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -0,0 +1,27 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SYS_FSL_DDR4"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_QSPI=y
diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile
index 01ea862..00dea42 100644
--- a/drivers/ddr/fsl/Makefile
+++ b/drivers/ddr/fsl/Makefile
@@ -33,3 +33,4 @@
obj-$(CONFIG_SYS_FSL_DDR_86XX) += mpc86xx_ddr.o
obj-$(CONFIG_SYS_FSL_DDRC_ARM_GEN3) += arm_ddr_gen3.o
obj-$(CONFIG_SYS_FSL_DDRC_GEN4) += fsl_ddr_gen4.o
+obj-$(CONFIG_SYS_FSL_MMDC) += fsl_mmdc.o
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index d37e247..042af09 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -50,8 +50,13 @@
u32 temp_sdram_cfg;
u32 total_gb_size_per_controller;
int timeout;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008511) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A009801)
+ u32 temp32;
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
- u32 temp32, mr6;
+ u32 mr6;
u32 vref_seq1[3] = {0x80, 0x96, 0x16}; /* for range 1 */
u32 vref_seq2[3] = {0xc0, 0xf0, 0x70}; /* for range 2 */
u32 *vref_seq = vref_seq1;
@@ -218,7 +223,7 @@
ddr_out32(&ddr->err_disable, regs->err_disable);
#endif
ddr_out32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 64; i++) {
if (regs->debug[i]) {
debug("Write to debug_%d as %08x\n",
i+1, regs->debug[i]);
@@ -238,7 +243,6 @@
#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
/* Part 1 of 2 */
- /* This erraum only applies to verion 5.2.0 */
if (fsl_ddr_get_version(ctrl_num) == 0x50200) {
/* Disable DRAM VRef training */
ddr_out32(&ddr->ddr_cdr2,
@@ -247,13 +251,25 @@
temp32 = ddr_in32(&ddr->debug[28]);
temp32 |= DDR_TX_BD_DIS;
ddr_out32(&ddr->debug[28], temp32);
- /* Disable D_INIT */
- ddr_out32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
ddr_out32(&ddr->debug[25], 0x9000);
+ } else if (fsl_ddr_get_version(ctrl_num) == 0x50201) {
+ /* Output enable forced off */
+ ddr_out32(&ddr->debug[37], 1 << 31);
+ /* Enable Vref training */
+ ddr_out32(&ddr->ddr_cdr2,
+ regs->ddr_cdr2 | DDR_CDR2_VREF_TRAIN_EN);
+ } else {
+ debug("Erratum A008511 doesn't apply.\n");
}
#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009803) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008511)
+ /* Disable D_INIT */
+ ddr_out32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A009801
temp32 = ddr_in32(&ddr->debug[25]);
temp32 &= ~DDR_CAS_TO_PRE_SUB_MASK;
@@ -331,21 +347,21 @@
#if defined(CONFIG_SYS_FSL_ERRATUM_A008511) || \
defined(CONFIG_SYS_FSL_ERRATUM_A009803)
/* Part 2 of 2 */
- /* This erraum only applies to verion 5.2.0 */
- if (fsl_ddr_get_version(ctrl_num) == 0x50200) {
- /* Wait for idle */
- timeout = 40;
- while (!(ddr_in32(&ddr->debug[1]) & 0x2) &&
- (timeout > 0)) {
- udelay(1000);
- timeout--;
- }
- if (timeout <= 0) {
- printf("Controler %d timeout, debug_2 = %x\n",
- ctrl_num, ddr_in32(&ddr->debug[1]));
- }
+ timeout = 40;
+ /* Wait for idle. D_INIT needs to be cleared earlier, or timeout */
+ while (!(ddr_in32(&ddr->debug[1]) & 0x2) &&
+ (timeout > 0)) {
+ udelay(1000);
+ timeout--;
+ }
+ if (timeout <= 0) {
+ printf("Controler %d timeout, debug_2 = %x\n",
+ ctrl_num, ddr_in32(&ddr->debug[1]));
+ }
#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
+ /* This erraum only applies to verion 5.2.0 */
+ if (fsl_ddr_get_version(ctrl_num) == 0x50200) {
/* The vref setting sequence is different for range 2 */
if (regs->ddr_cdr2 & DDR_CDR2_VREF_RANGE_2)
vref_seq = vref_seq2;
@@ -392,32 +408,32 @@
printf("Controler %d timeout, debug_2 = %x\n",
ctrl_num, ddr_in32(&ddr->debug[1]));
}
- /* Restore D_INIT */
- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ }
#endif /* CONFIG_SYS_FSL_ERRATUM_A008511 */
#ifdef CONFIG_SYS_FSL_ERRATUM_A009803
- if (regs->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
- /* if it's RDIMM */
- if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) {
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN))
- continue;
- set_wait_for_bits_clear(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL(i) |
- 0x070000ed,
- MD_CNTL_MD_EN);
- udelay(1);
- }
+ if (regs->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ /* if it's RDIMM */
+ if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) {
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN))
+ continue;
+ set_wait_for_bits_clear(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL(i) |
+ 0x070000ed,
+ MD_CNTL_MD_EN);
+ udelay(1);
}
-
- ddr_out32(&ddr->err_disable,
- regs->err_disable & ~DDR_ERR_DISABLE_APED);
}
-#endif
+
+ ddr_out32(&ddr->err_disable,
+ regs->err_disable & ~DDR_ERR_DISABLE_APED);
}
#endif
+ /* Restore D_INIT */
+ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+#endif
total_gb_size_per_controller = 0;
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
diff --git a/drivers/ddr/fsl/fsl_mmdc.c b/drivers/ddr/fsl/fsl_mmdc.c
new file mode 100644
index 0000000..52eec0f
--- /dev/null
+++ b/drivers/ddr/fsl/fsl_mmdc.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Generic driver for Freescale MMDC(Multi Mode DDR Controller).
+ */
+
+#include <common.h>
+#include <fsl_mmdc.h>
+#include <asm/io.h>
+
+static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
+{
+ int timeout = 1000;
+
+ out_be32(ptr, value);
+
+ while (in_be32(ptr) & bits) {
+ udelay(100);
+ timeout--;
+ }
+ if (timeout <= 0)
+ printf("Error: %p wait for clear timeout.\n", ptr);
+}
+
+void mmdc_init(const struct fsl_mmdc_info *priv)
+{
+ struct mmdc_regs *mmdc = (struct mmdc_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+ unsigned int tmp;
+
+ /* 1. set configuration request */
+ out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ);
+
+ /* 2. configure the desired timing parameters */
+ out_be32(&mmdc->mdotc, priv->mdotc);
+ out_be32(&mmdc->mdcfg0, priv->mdcfg0);
+ out_be32(&mmdc->mdcfg1, priv->mdcfg1);
+ out_be32(&mmdc->mdcfg2, priv->mdcfg2);
+
+ /* 3. configure DDR type and other miscellaneous parameters */
+ out_be32(&mmdc->mdmisc, priv->mdmisc);
+ out_be32(&mmdc->mpmur0, MMDC_MPMUR0_FRC_MSR);
+ out_be32(&mmdc->mdrwd, priv->mdrwd);
+ out_be32(&mmdc->mpodtctrl, priv->mpodtctrl);
+
+ /* 4. configure the required delay while leaving reset */
+ out_be32(&mmdc->mdor, priv->mdor);
+
+ /* 5. configure DDR physical parameters */
+ /* set row/column address width, burst length, data bus width */
+ tmp = priv->mdctl & ~(MDCTL_SDE0 | MDCTL_SDE1);
+ out_be32(&mmdc->mdctl, tmp);
+ /* configure address space partition */
+ out_be32(&mmdc->mdasp, priv->mdasp);
+
+ /* 6. perform a ZQ calibration - not needed here, doing in #8b */
+
+ /* 7. enable MMDC with the desired chip select */
+#if (CONFIG_CHIP_SELECTS_PER_CTRL == 1)
+ out_be32(&mmdc->mdctl, tmp | MDCTL_SDE0);
+#elif (CONFIG_CHIP_SELECTS_PER_CTRL == 2)
+ out_be32(&mmdc->mdctl, tmp | MDCTL_SDE0 | MDCTL_SDE1);
+#endif
+
+ /* 8a. dram init sequence: update MRs for ZQ, ODT, PRE, etc */
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(8) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2);
+
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(0) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3);
+
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1);
+
+ out_be32(&mmdc->mdscr, CMD_ADDR_MSB_MR_OP(0x19) |
+ CMD_ADDR_LSB_MR_ADDR(0x30) |
+ MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0);
+
+ /* 8b. ZQ calibration */
+ out_be32(&mmdc->mdscr, CMD_ADDR_MSB_MR_OP(0x4) | MDSCR_ENABLE_CON_REQ |
+ CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0);
+
+ set_wait_for_bits_clear(&mmdc->mpzqhwctrl, priv->mpzqhwctrl,
+ MPZQHWCTRL_ZQ_HW_FORCE);
+
+ /* 9a. calibrations now, wr lvl */
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(0x84) |
+ MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1);
+
+ out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ | MDSCR_WL_EN |
+ CMD_NORMAL);
+
+ set_wait_for_bits_clear(&mmdc->mpwlgcr, MPWLGCR_HW_WL_EN,
+ MPWLGCR_HW_WL_EN);
+
+ mdelay(1);
+
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1);
+ out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ);
+
+ mdelay(1);
+
+ /* 9b. read DQS gating calibration */
+ out_be32(&mmdc->mdscr, CMD_ADDR_MSB_MR_OP(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0);
+
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3);
+
+ out_be32(&mmdc->mppdcmpr2, MPPDCMPR2_MPR_COMPARE_EN);
+
+ /* set absolute read delay offset */
+ if (priv->mprddlctl)
+ out_be32(&mmdc->mprddlctl, priv->mprddlctl);
+ else
+ out_be32(&mmdc->mprddlctl, MMDC_MPRDDLCTL_DEFAULT_DELAY);
+
+ set_wait_for_bits_clear(&mmdc->mpdgctrl0,
+ AUTO_RD_DQS_GATING_CALIBRATION_EN,
+ AUTO_RD_DQS_GATING_CALIBRATION_EN);
+
+ out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ | CMD_LOAD_MODE_REG |
+ CMD_BANK_ADDR_3);
+
+ /* 9c. read calibration */
+ out_be32(&mmdc->mdscr, CMD_ADDR_MSB_MR_OP(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0);
+ out_be32(&mmdc->mdscr, CMD_ADDR_LSB_MR_ADDR(4) | MDSCR_ENABLE_CON_REQ |
+ CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3);
+ out_be32(&mmdc->mppdcmpr2, MPPDCMPR2_MPR_COMPARE_EN);
+ set_wait_for_bits_clear(&mmdc->mprddlhwctl,
+ MPRDDLHWCTL_AUTO_RD_CALIBRATION_EN,
+ MPRDDLHWCTL_AUTO_RD_CALIBRATION_EN);
+
+ out_be32(&mmdc->mdscr, MDSCR_ENABLE_CON_REQ | CMD_LOAD_MODE_REG |
+ CMD_BANK_ADDR_3);
+
+ /* 10. configure power-down, self-refresh entry, exit parameters */
+ out_be32(&mmdc->mdpdc, priv->mdpdc);
+ out_be32(&mmdc->mapsr, MMDC_MAPSR_PWR_SAV_CTRL_STAT);
+
+ /* 11. ZQ config again? do nothing here */
+
+ /* 12. refresh scheme */
+ set_wait_for_bits_clear(&mmdc->mdref, priv->mdref,
+ MDREF_START_REFRESH);
+
+ /* 13. disable CON_REQ */
+ out_be32(&mmdc->mdscr, MDSCR_DISABLE_CFG_REQ);
+}
diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c
index d23e6e5..49352b3 100644
--- a/drivers/ddr/fsl/interactive.c
+++ b/drivers/ddr/fsl/interactive.c
@@ -670,7 +670,7 @@
print_option_table(options, n_opts, ddr);
- for (i = 0; i < 32; i++)
+ for (i = 0; i < 64; i++)
printf("debug_%02d = 0x%08X\n", i+1, ddr->debug[i]);
}
@@ -771,7 +771,7 @@
if (handle_option_table(options, n_opts, ddr, regname, value_str))
return;
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 64; i++) {
unsigned int value = simple_strtoul(value_str, NULL, 0);
sprintf(buf, "debug_%u", i + 1);
if (strcmp(buf, regname) == 0) {
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c0e5f03..e4f2464 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -16,7 +16,6 @@
obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
-obj-$(CONFIG_FSL_DEBUG_SERVER) += fsl_debug_server.o
endif
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_GPIO_LED) += gpio_led.o
diff --git a/drivers/misc/fsl_debug_server.c b/drivers/misc/fsl_debug_server.c
deleted file mode 100644
index 98d9fbe..0000000
--- a/drivers/misc/fsl_debug_server.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <fsl-mc/fsl_mc.h>
-#include <fsl_debug_server.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-static int debug_server_ver_info_maj, debug_server_ver_info_min;
-
-/**
- * Copying Debug Server firmware to DDR
- */
-static int debug_server_copy_image(const char *title, u64 image_addr,
- u32 image_size, u64 debug_server_ram_addr)
-{
- debug("%s copied to address %p\n", title,
- (void *)debug_server_ram_addr);
- memcpy((void *)debug_server_ram_addr, (void *)image_addr, image_size);
-
- return 0;
-}
-
-/**
- * Debug Server FIT image parser checks if the image is in FIT
- * format, verifies integrity of the image and calculates
- * raw image address and size values.
- *
- * Returns 0 if success and -1 if any of the above mentioned
- * task fail.
- **/
-int debug_server_parse_firmware_fit_image(const void **raw_image_addr,
- size_t *raw_image_size)
-{
- int format;
- void *fit_hdr;
- int node_offset;
- const void *data;
- size_t size;
- const char *uname = "firmware";
- char *desc;
- char *debug_server_ver_info;
- char *debug_server_ver_info_major, *debug_server_ver_info_minor;
-
- /* Check if the image is in NOR flash */
-#ifdef CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
- fit_hdr = (void *)CONFIG_SYS_DEBUG_SERVER_FW_ADDR;
-#else
-#error "CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR not defined"
-#endif
-
- /* Check if Image is in FIT format */
- format = genimg_get_format(fit_hdr);
- if (format != IMAGE_FORMAT_FIT) {
- printf("Debug Server FW: Not a FIT image\n");
- goto out_error;
- }
-
- if (!fit_check_format(fit_hdr)) {
- printf("Debug Server FW: Bad FIT image format\n");
- goto out_error;
- }
-
- node_offset = fit_image_get_node(fit_hdr, uname);
- if (node_offset < 0) {
- printf("Debug Server FW:Can not find %s subimage\n", uname);
- goto out_error;
- }
-
- /* Verify Debug Server firmware image */
- if (!fit_image_verify(fit_hdr, node_offset)) {
- printf("Debug Server FW: Bad Debug Server firmware hash");
- goto out_error;
- }
-
- if (fit_get_desc(fit_hdr, node_offset, &desc) < 0) {
- printf("Debug Server FW: Failed to get FW description");
- goto out_error;
- }
-
- debug_server_ver_info = strstr(desc, "Version");
- debug_server_ver_info_major = strtok(debug_server_ver_info, ".");
- debug_server_ver_info_minor = strtok(NULL, ".");
-
- debug_server_ver_info_maj =
- simple_strtoul(debug_server_ver_info_major, NULL, 10);
- debug_server_ver_info_min =
- simple_strtoul(debug_server_ver_info_minor, NULL, 10);
-
- /* Debug server version checking */
- if ((debug_server_ver_info_maj < DEBUG_SERVER_VER_MAJOR) ||
- (debug_server_ver_info_min < DEBUG_SERVER_VER_MINOR)) {
- printf("Debug server FW mismatches the min version required\n");
- printf("Expected:%d.%d, Got %d.%d\n",
- DEBUG_SERVER_VER_MAJOR, DEBUG_SERVER_VER_MINOR,
- debug_server_ver_info_maj,
- debug_server_ver_info_min);
- goto out_error;
- }
-
- /* Get address and size of raw image */
- fit_image_get_data(fit_hdr, node_offset, &data, &size);
-
- *raw_image_addr = data;
- *raw_image_size = size;
-
- return 0;
-
-out_error:
- return -1;
-}
-
-/**
- * Return the actual size of the Debug Server private DRAM block.
- *
- * NOTE: For now this function always returns the minimum required size,
- * However, in the future, the actual size may be obtained from an environment
- * variable.
- */
-unsigned long debug_server_get_dram_block_size(void)
-{
- return CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE;
-}
-
-int debug_server_init(void)
-{
- struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
- int error, timeout = CONFIG_SYS_DEBUG_SERVER_TIMEOUT;
- int debug_server_boot_status;
- u64 debug_server_ram_addr, debug_server_ram_size;
- const void *raw_image_addr;
- size_t raw_image_size = 0;
-
- debug("debug_server_init called\n");
- /*
- * The Debug Server private DRAM block was already carved at the end of
- * DRAM by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
- */
- debug_server_ram_size = debug_server_get_dram_block_size();
- if (gd->bd->bi_dram[1].start)
- debug_server_ram_addr =
- gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
- else
- debug_server_ram_addr =
- gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
-
-#ifdef CONFIG_FSL_MC_ENET
- debug_server_ram_addr += mc_get_dram_block_size();
-#endif
-
- error = debug_server_parse_firmware_fit_image(&raw_image_addr,
- &raw_image_size);
- if (error != 0)
- goto out;
-
- debug("debug server (ram addr = 0x%llx, ram size = 0x%llx)\n",
- debug_server_ram_addr, debug_server_ram_size);
- /*
- * Load the Debug Server FW at the beginning of the Debug Server
- * private DRAM block:
- */
- debug_server_copy_image("Debug Server Firmware",
- (u64)raw_image_addr, raw_image_size,
- debug_server_ram_addr);
-
- /* flush dcache */
- flush_dcache_range((unsigned long)debug_server_ram_addr,
- (unsigned long)debug_server_ram_addr +
- (unsigned long)debug_server_ram_size);
-
- /*
- * Tell SP that the Debug Server FW is about to be launched. Before that
- * populate the following:
- * 1. Write the size allocated to SP Memory region into Bits {31:16} of
- * SCRATCHRW5.
- * 2. Write the start address of the SP memory regions into
- * SCRATCHRW5 (Bits {15:0}, contain most significant bits, Bits
- * {47:32} of the SP Memory Region physical start address
- * (SoC address)) and SCRATCHRW6 (Bits {31:0}).
- * 3. To know the Debug Server FW boot status, set bit 0 of SCRATCHRW11
- * to 1. The Debug Server sets this to 0 to indicate a
- * successul boot.
- * 4. Wakeup SP by writing 0x1F to VSG GIC reg VIGR2.
- */
-
- /* 512 MB */
- out_le32(&gur->scratchrw[5 - 1],
- (u32)((u64)debug_server_ram_addr >> 32) | (0x000D << 16));
- out_le32(&gur->scratchrw[6 - 1],
- ((u32)debug_server_ram_addr) & 0xFFFFFFFF);
-
- out_le32(&gur->scratchrw[11 - 1], DEBUG_SERVER_INIT_STATUS);
- /* Allow the changes to reflect in GUR block */
- mb();
-
- /*
- * Program VGIC to raise an interrupt to SP
- */
- out_le32(CONFIG_SYS_FSL_SP_VSG_GIC_VIGR2, 0x1F);
- /* Allow the changes to reflect in VIGR2 */
- mb();
-
- dmb();
- debug("Polling for Debug server to launch ...\n");
-
- while (1) {
- debug_server_boot_status = in_le32(&gur->scratchrw[11 - 1]);
- if (!(debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK))
- break;
-
- udelay(1); /* throttle polling */
- if (timeout-- <= 0)
- break;
- }
-
- if (timeout <= 0) {
- printf("Debug Server FW timed out (boot status: 0x%x)\n",
- debug_server_boot_status);
- error = -ETIMEDOUT;
- goto out;
- }
-
- if (debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK) {
- printf("Debug server FW error'ed out (boot status: 0x%x)\n",
- debug_server_boot_status);
- error = -ENODEV;
- goto out;
- }
-
- printf("Debug server booted\n");
- printf("Detected firmware %d.%d, (boot status: 0x0%x)\n",
- debug_server_ver_info_maj, debug_server_ver_info_min,
- debug_server_boot_status);
-
-out:
- if (error != 0)
- debug_server_boot_status = -error;
- else
- debug_server_boot_status = 0;
-
- return debug_server_boot_status;
-}
-
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 344fbe2..316fef4 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -39,4 +39,4 @@
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_PPC_B4860) += b4860.o
obj-$(CONFIG_LS1043A) += ls1043.o
-obj-$(CONFIG_LS1046A) += ls1046.o
+obj-$(CONFIG_ARCH_LS1046A) += ls1046.o
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index ce4a307..89f0d6a 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -368,8 +368,18 @@
void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
int ret = 0;
+#ifdef CONFIG_DM_SPI_FLASH
+ struct udevice *new;
+
+ /* speed and mode will be read from DT */
+ ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ 0, 0, &new);
+
+ ucode_flash = dev_get_uclass_priv(new);
+#else
ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+#endif
if (!ucode_flash)
printf("SF: probe for ucode failed\n");
else {
diff --git a/examples/standalone/mem_to_mem_idma2intr.c b/examples/standalone/mem_to_mem_idma2intr.c
index 17da8db..ce6e6c4 100644
--- a/examples/standalone/mem_to_mem_idma2intr.c
+++ b/examples/standalone/mem_to_mem_idma2intr.c
@@ -186,13 +186,6 @@
}
return 0;
}
-void * memset(void * s,int c,size_t count)
-{
- char *xs = (char *) s;
- while (count--)
- *xs++ = c;
- return s;
-}
int memcmp(const void * cs,const void * ct,size_t count)
{
const unsigned char *su1, *su2;
diff --git a/include/_exports.h b/include/_exports.h
index 11beeb2..1584705 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -75,6 +75,7 @@
const char *, char **, unsigned int)
EXPORT_FUNC(strcpy, char *, strcpy, char *dest, const char *src)
EXPORT_FUNC(mdelay, void, mdelay, unsigned long msec)
+ EXPORT_FUNC(memset, void *, memset, void *, int, size_t)
#ifdef CONFIG_PHY_AQUANTIA
EXPORT_FUNC(mdio_get_current_dev, struct mii_dev *,
mdio_get_current_dev, void)
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index fba2fac..5fb6c47 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -9,7 +9,6 @@
#define CONFIG_FSL_LAYERSCAPE
#define CONFIG_FSL_LSCH2
-#define CONFIG_LS1012A
#define CONFIG_GICV2
#define CONFIG_SYS_HAS_SERDES
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 19ad194..612f243 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -9,14 +9,12 @@
#include "ls1012a_common.h"
+/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
-
-#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x04180000
-#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x84180000
-
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 75b60fa..54abf30 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -9,14 +9,15 @@
#include "ls1012a_common.h"
-
+/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
-
-#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000
-#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
/*
* QIXIS Definitions
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index d3117e7..0c13dde 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -9,15 +9,11 @@
#include "ls1012a_common.h"
-
+/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
-
-#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000
-#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000
-
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 554c13c..0d72e69 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -269,6 +269,13 @@
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_CTL_SYS 0x5
+#define QIXIS_CTL_SYS_EVTSW_MASK 0x0c
+#define QIXIS_CTL_SYS_EVTSW_IRQ 0x04
+#define QIXIS_RST_FORCE_3 0x45
+#define QIXIS_RST_FORCE_3_PCIESLOT1 0x80
+#define QIXIS_PWR_CTL2 0x21
+#define QIXIS_PWR_CTL2_PCTL 0x2
#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
new file mode 100644
index 0000000..7c5e635
--- /dev/null
+++ b/include/configs/ls1046a_common.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1046A_COMMON_H
+#define __LS1046A_COMMON_H
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_FSL_LSCH2
+#define CONFIG_MP
+#define CONFIG_SYS_FSL_CLK
+#define CONFIG_GICV2
+
+#include <asm/arch/config.h>
+#ifdef CONFIG_SYS_FSL_SRDS_1
+#define CONFIG_SYS_HAS_SERDES
+#endif
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
+
+#define CPU_RELEASE_ADDR secondary_boot_func
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 25000000 /* 25MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* SD boot SPL */
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x110
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
+#define CONFIG_SPL_STACK 0x10020000
+#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */
+#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SYS_MONITOR_LEN 0xa0000
+#endif
+
+/* NAND SPL */
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SPL_PBL_PAD
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */
+#define CONFIG_SPL_STACK 0x1001f000
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SYS_MONITOR_LEN 0xa0000
+#endif
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_MXC_I2C2
+#define CONFIG_SYS_I2C_MXC_I2C3
+#define CONFIG_SYS_I2C_MXC_I2C4
+
+/* Command line configuration */
+#define CONFIG_CMD_ENV
+
+/* MMC */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
+
+#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
+
+/* FMan ucode */
+#define CONFIG_SYS_DPAA_FMAN
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+
+#ifdef CONFIG_SD_BOOT
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 1MB (2048 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_FMAN_FW_ADDR 0x40300000
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 1000000
+#define CONFIG_ENV_SPI_MODE 0x03
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+#define CONFIG_ARCH_EARLY_INIT_R
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x80100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x1000000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "console=ttyS0,115200\0" \
+ MTDPARTS_DEFAULT "\0"
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
+ "earlycon=uart8250,mmio,0x21c0500 " \
+ MTDPARTS_DEFAULT
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
+#endif /* __LS1046A_COMMON_H */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
new file mode 100644
index 0000000..2e5c2f1
--- /dev/null
+++ b/include/configs/ls1046aqds.h
@@ -0,0 +1,487 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1046AQDS_H__
+#define __LS1046AQDS_H__
+
+#include "ls1046a_common.h"
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_TEXT_BASE 0x40010000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x60100000
+#endif
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_DDR_SPD
+#define SPD_EEPROM_ADDRESS 0x51
+#define CONFIG_SYS_SPD_BUS_NUM 0
+
+#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_SYS_HAS_SERDES
+
+/* DSPI */
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_SPI_FLASH_STMICRO /* cs0 */
+#define CONFIG_SPI_FLASH_SST /* cs1 */
+#define CONFIG_SPI_FLASH_EON /* cs2 */
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_CS 0
+#endif
+#endif
+
+/* QSPI */
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 24)
+#define FSL_QSPI_FLASH_NUM 2
+#endif
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHYLIB_10G
+#define RGMII_PHY1_ADDR 0x1
+#define RGMII_PHY2_ADDR 0x2
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+/* PHY address on QSGMII riser card on slot 2 */
+#define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
+#define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
+#define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
+#define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
+#endif
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI \
+ board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
+#endif
+#endif
+
+/* IFC */
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_FSL_IFC
+/*
+ * CONFIG_SYS_FLASH_BASE has the final address (core view)
+ * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
+ */
+#define CONFIG_SYS_FLASH_BASE 0x60000000
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+#endif
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SCSI
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+#define CONFIG_SYS_SATA AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+/*
+ * IFC Definitions
+ */
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
+
+#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+ CSOR_NOR_TRHZ_80)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1a) | \
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWPH(0xe) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \
+ CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
+
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
+
+/*
+ * NAND Flash Definitions
+ */
+#define CONFIG_NAND_FSL_IFC
+
+#define CONFIG_SYS_NAND_BASE 0x7e800000
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
+
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_NAND \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_8 /* 8-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
+ | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
+ | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
+ | CSOR_NAND_PB(64)) /* 64 Pages Per Block */
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x7) | \
+ FTIM0_NAND_TWH(0xa))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0xe) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \
+ FTIM2_NAND_TREH(0xa) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SPL_PAD_TO 0x40000 /* block aligned */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE 0x7fb00000
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
+#define QIXIS_LBMAP_SWITCH 6
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_LBMAP_NAND 0x09
+#define QIXIS_LBMAP_SD 0x00
+#define QIXIS_LBMAP_SD_QSPI 0xff
+#define QIXIS_LBMAP_QSPI 0xff
+#define QIXIS_RCW_SRC_NAND 0x110
+#define QIXIS_RCW_SRC_SD 0x040
+#define QIXIS_RCW_SRC_QSPI 0x045
+#define QIXIS_RST_CTL_RESET 0x41
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+
+#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
+#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+ CSPR_PORT_SIZE_8 | \
+ CSPR_MSEL_GPCM | \
+ CSPR_V)
+#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+ CSOR_NOR_NOR_MODE_AVD_NOR | \
+ CSOR_NOR_TRHZ_80)
+
+/*
+ * QIXIS Timing parameters for IFC GPCM
+ */
+#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \
+ FTIM0_GPCM_TEADC(0x20) | \
+ FTIM0_GPCM_TEAHC(0x10))
+#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \
+ FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \
+ FTIM2_GPCM_TCH(0x8) | \
+ FTIM2_GPCM_TWP(0xf0))
+#define CONFIG_SYS_FPGA_FTIM3 0x0
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#endif
+
+/*
+ * I2C bus multiplexer
+ */
+#define I2C_MUX_PCA_ADDR_PRI 0x77
+#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */
+#define I2C_RETIMER_ADDR 0x18
+#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_CH7301 0xC
+#define I2C_MUX_CH5 0xD
+#define I2C_MUX_CH6 0xE
+#define I2C_MUX_CH7 0xF
+
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR 0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
+
+#define CONFIG_VID_FLS_ENV "ls1046aqds_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_INA220
+/* The lowest and highest voltage allowed for LS1046AQDS */
+#define VDD_MV_MIN 819
+#define VDD_MV_MAX 1212
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (1024 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x20000
+#endif
+
+#define CONFIG_CMDLINE_TAG
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
+ "e0000 f00000 && bootm $kernel_load"
+#else
+#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
+ "$kernel_size && bootm $kernel_load"
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \
+ "14m(free)"
+#else
+#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
+ "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
+ "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
+ "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
+ "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
+ "40m(nor_bank4_fit);7e800000.flash:" \
+ "4m(nand_uboot),36m(nand_kernel)," \
+ "472m(nand_free);spi0.0:2m(uboot)," \
+ "14m(free)"
+#endif
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1046AQDS_H__ */
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
new file mode 100644
index 0000000..693cc8d
--- /dev/null
+++ b/include/configs/ls1046ardb.h
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1046ARDB_H__
+#define __LS1046ARDB_H__
+
+#include "ls1046a_common.h"
+
+#if defined(CONFIG_FSL_LS_PPA)
+#define CONFIG_ARMV8_PSCI
+#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE (1UL * 1024 * 1024)
+
+#define CONFIG_SYS_LS_PPA_FW_IN_XIP
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
+#define CONFIG_SYS_LS_PPA_FW_ADDR 0x40500000
+#endif
+#endif
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x40100000
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_DDR_SPD
+#define SPD_EEPROM_ADDRESS 0x51
+#define CONFIG_SYS_SPD_BUS_NUM 0
+
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#define CONFIG_FSL_DDR_BIST /* enable built-in memory test */
+#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#ifdef CONFIG_EMMC_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
+#endif
+#endif
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* IFC */
+#define CONFIG_FSL_IFC
+
+/*
+ * NAND Flash Definitions
+ */
+#define CONFIG_NAND_FSL_IFC
+
+#define CONFIG_SYS_NAND_BASE 0x7e800000
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_NAND \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_8 /* 8-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
+ | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
+ | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
+ | CSOR_NAND_PB(64)) /* 64 Pages Per Block */
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x7) | \
+ FTIM0_NAND_TWH(0xa))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0xe) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \
+ FTIM2_NAND_TREH(0xa) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+/*
+ * CPLD
+ */
+#define CONFIG_SYS_CPLD_BASE 0x7fb00000
+#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+
+#define CONFIG_SYS_CPLD_CSPR_EXT (0x0)
+#define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
+ CSPR_PORT_SIZE_8 | \
+ CSPR_MSEL_GPCM | \
+ CSPR_V)
+#define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_CPLD_CSOR CSOR_NOR_ADM_SHIFT(16)
+
+/* CPLD Timing parameters for IFC GPCM */
+#define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
+ FTIM2_GPCM_TCH(0xf) | \
+ FTIM2_GPCM_TWP(0x3E))
+#define CONFIG_SYS_CPLD_FTIM3 0x0
+
+/* IFC Timing Params */
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define I2C_RETIMER_ADDR 0x18
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_OFFSET (1024 * 1024)
+#define CONFIG_ENV_SIZE 0x2000
+#else
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */
+#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
+#endif
+
+/* FMan */
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_AQUANTIA
+#define AQR105_IRQ_MASK 0x80000000
+
+#define RGMII_PHY1_ADDR 0x1
+#define RGMII_PHY2_ADDR 0x2
+
+#define SGMII_PHY1_ADDR 0x3
+#define SGMII_PHY2_ADDR 0x4
+
+#define FM1_10GEC1_PHY_ADDR 0x0
+
+#define CONFIG_ETHPRIME "FM1@DTSEC3"
+#endif
+
+/* QSPI device */
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 26)
+#define FSL_QSPI_FLASH_NUM 2
+#define CONFIG_SPI_FLASH_BAR
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SCSI
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \
+ "$kernel_start $kernel_size;" \
+ "bootm $kernel_load"
+
+#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
+ "15m(u-boot),48m(kernel.itb);" \
+ "7e800000.flash:16m(nand_uboot)," \
+ "48m(nand_kernel),448m(nand_free)"
+
+#endif /* __LS1046ARDB_H__ */
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 92de604..42d0298 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -153,11 +153,6 @@
#define CONFIG_SYS_NAND_BASE 0x530000000ULL
#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
-/* Debug Server firmware */
-#define CONFIG_FSL_DEBUG_SERVER
-/* 2 sec timeout */
-#define CONFIG_SYS_DEBUG_SERVER_TIMEOUT (2 * 1000 * 1000)
-
/* MC firmware */
#define CONFIG_FSL_MC_ENET
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
@@ -175,8 +170,7 @@
* It will be used by MC and Debug Server. The MC region must be
* 512MB aligned, so the min size to hide is 512MB.
*/
-#if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
-#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (254UL * 1024 * 1024)
+#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
#define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024)
#endif
diff --git a/include/exports.h b/include/exports.h
index deef8fb..1d81bc4 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -57,7 +57,7 @@
};
-#define XF_VERSION 8
+#define XF_VERSION 9
#if defined(CONFIG_X86)
extern gd_t *global_data;
diff --git a/include/fsl_csu.h b/include/fsl_csu.h
index f4d97fb..8582ac0 100644
--- a/include/fsl_csu.h
+++ b/include/fsl_csu.h
@@ -30,5 +30,7 @@
};
void enable_layerscape_ns_access(void);
+void set_devices_ns_access(struct csu_ns_dev *ns_dev, u16 val);
+void set_pcie_ns_access(int pcie, u16 val);
#endif
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 486e47e..36bd9d7 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -299,7 +299,7 @@
unsigned int ddr_cdr2;
unsigned int err_disable;
unsigned int err_int_en;
- unsigned int debug[32];
+ unsigned int debug[64];
} fsl_ddr_cfg_regs_t;
typedef struct memctl_options_partial_s {
diff --git a/include/fsl_debug_server.h b/include/fsl_debug_server.h
deleted file mode 100644
index 28d8adb..0000000
--- a/include/fsl_debug_server.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __FSL_DBG_SERVER_H__
-#define __FSL_DBG_SERVER_H__
-
-#include <asm/io.h>
-#include <common.h>
-
-/*
- * Define Debug Server firmware version information
- */
-
-/* Major version number: incremented on API compatibility changes */
-#define DEBUG_SERVER_VER_MAJOR 0
-
-/* Minor version number: incremented on API additions (backward
- * compatible); reset when major version is incremented.
- */
-#define DEBUG_SERVER_VER_MINOR 1
-
-#define DEBUG_SERVER_INIT_STATUS (1 << 0)
-#define DEBUG_SERVER_INIT_STATUS_MASK (0x00000001)
-
-int debug_server_init(void);
-unsigned long debug_server_get_dram_block_size(void);
-
-#endif /* __FSL_DBG_SERVER_H__ */
-
diff --git a/include/fsl_immap.h b/include/fsl_immap.h
index e4addad..b1c4fe7 100644
--- a/include/fsl_immap.h
+++ b/include/fsl_immap.h
@@ -131,7 +131,6 @@
u32 capture_ext_address; /* Error Extended Addr Capture */
u32 err_sbe; /* Single-Bit ECC Error Management */
u8 res_e5c[164];
- u32 debug[32]; /* debug_1 to debug_32 */
- u8 res_f80[128];
+ u32 debug[64]; /* debug_1 to debug_64 */
};
#endif /* __FSL_IMMAP_H */
diff --git a/include/fsl_mmdc.h b/include/fsl_mmdc.h
index a939d89..d5c4f8d 100644
--- a/include/fsl_mmdc.h
+++ b/include/fsl_mmdc.h
@@ -7,63 +7,39 @@
#ifndef FSL_MMDC_H
#define FSL_MMDC_H
-#define CONFIG_SYS_MMDC_CORE_ODT_TIMING 0x12554000
-#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_0 0xbabf7954
-#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_1 0xff328f64
-#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_2 0x01ff00db
-
-#define CONFIG_SYS_MMDC_CORE_MISC 0x00001680
-#define CONFIG_SYS_MMDC_PHY_MEASURE_UNIT 0x00000800
-#define CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY 0x00002000
-#define CONFIG_SYS_MMDC_PHY_ODT_CTRL 0x0000022a
-
-#define CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY 0x00bf1023
-
-#define CONFIG_SYS_MMDC_CORE_ADDR_PARTITION 0x0000007f
-
-#define CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL 0xa1390003
-
-#define FORCE_ZQ_AUTO_CALIBRATION (0x1 << 16)
-
-/* PHY Write Leveling Configuration and Error Status (MPWLGCR) */
-#define WR_LVL_HW_EN 0x00000001
+/* PHY Write Leveling Configuration and Error Status Register (MPWLGCR) */
+#define MPWLGCR_HW_WL_EN (1 << 0)
/* PHY Pre-defined Compare and CA delay-line Configuration (MPPDCMPR2) */
-#define MPR_COMPARE_EN 0x00000001
+#define MPPDCMPR2_MPR_COMPARE_EN (1 << 0)
-#define CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG 0x40404040
/* MMDC PHY Read DQS gating control register 0 (MPDGCTRL0) */
-#define AUTO_RD_DQS_GATING_CALIBRATION_EN 0x10000000
+#define AUTO_RD_DQS_GATING_CALIBRATION_EN (1 << 28)
/* MMDC PHY Read Delay HW Calibration Control Register (MPRDDLHWCTL) */
-#define AUTO_RD_CALIBRATION_EN 0x00000010
+#define MPRDDLHWCTL_AUTO_RD_CALIBRATION_EN (1 << 4)
-#define CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL 0x00030035
+/* MMDC Core Power Saving Control and Status Register (MMDC_MAPSR) */
+#define MMDC_MAPSR_PWR_SAV_CTRL_STAT 0x00001067
-#define CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT 0x00001067
-
-#define CONFIG_SYS_MMDC_CORE_REFRESH_CTL 0x0f3c8000
-
-#define START_REFRESH 0x00000001
+/* MMDC Core Refresh Control Register (MMDC_MDREF) */
+#define MDREF_START_REFRESH (1 << 0)
/* MMDC Core Special Command Register (MDSCR) */
-#define CMD_ADDR_MSB_MR_OP(x) (x << 24)
-
-#define CMD_ADDR_LSB_MR_ADDR(x) (x << 16)
-
-#define DISABLE_CFG_REQ 0x0
-#define CONFIGURATION_REQ (0x1 << 15)
-#define WL_EN (0x1 << 9)
-
-#define CMD_NORMAL (0x0 << 4)
-#define CMD_PRECHARGE (0x1 << 4)
-#define CMD_AUTO_REFRESH (0x2 << 4)
-#define CMD_LOAD_MODE_REG (0x3 << 4)
-#define CMD_ZQ_CALIBRATION (0x4 << 4)
-#define CMD_PRECHARGE_BANK_OPEN (0x5 << 4)
-#define CMD_MRR (0x6 << 4)
-
+#define CMD_ADDR_MSB_MR_OP(x) (x << 24)
+#define CMD_ADDR_LSB_MR_ADDR(x) (x << 16)
+#define MDSCR_DISABLE_CFG_REQ (0 << 15)
+#define MDSCR_ENABLE_CON_REQ (1 << 15)
+#define MDSCR_CON_ACK (1 << 14)
+#define MDSCR_WL_EN (1 << 9)
+#define CMD_NORMAL (0 << 4)
+#define CMD_PRECHARGE (1 << 4)
+#define CMD_AUTO_REFRESH (2 << 4)
+#define CMD_LOAD_MODE_REG (3 << 4)
+#define CMD_ZQ_CALIBRATION (4 << 4)
+#define CMD_PRECHARGE_BANK_OPEN (5 << 4)
+#define CMD_MRR (6 << 4)
#define CMD_BANK_ADDR_0 0x0
#define CMD_BANK_ADDR_1 0x1
#define CMD_BANK_ADDR_2 0x2
@@ -73,8 +49,22 @@
#define CMD_BANK_ADDR_6 0x6
#define CMD_BANK_ADDR_7 0x7
+/* MMDC Core Control Register (MDCTL) */
+#define MDCTL_SDE0 (1 << 31)
+#define MDCTL_SDE1 (1 << 30)
+
+/* MMDC PHY ZQ HW control register (MMDC_MPZQHWCTRL) */
+#define MPZQHWCTRL_ZQ_HW_FORCE (1 << 16)
+
+/* MMDC PHY Measure Unit Register (MMDC_MPMUR0) */
+#define MMDC_MPMUR0_FRC_MSR (1 << 11)
+
+/* MMDC PHY Read delay-lines Configuration Register (MMDC_MPRDDLCTL) */
+/* default 64 for a quarter cycle delay */
+#define MMDC_MPRDDLCTL_DEFAULT_DELAY 0x40404040
+
/* MMDC Registers */
-struct mmdc_p_regs {
+struct mmdc_regs {
u32 mdctl;
u32 mdpdc;
u32 mdotc;
@@ -120,7 +110,10 @@
u32 mprddqby1dl;
u32 mprddqby2dl;
u32 mprddqby3dl;
- u32 res5[4];
+ u32 mpwrdqby0dl;
+ u32 mpwrdqby1dl;
+ u32 mpwrdqby2dl;
+ u32 mpwrdqby3dl;
u32 mpdgctrl0;
u32 mpdgctrl1;
u32 mpdgdlst0;
@@ -157,4 +150,23 @@
u32 mpdccr;
};
+struct fsl_mmdc_info {
+ u32 mdctl;
+ u32 mdpdc;
+ u32 mdotc;
+ u32 mdcfg0;
+ u32 mdcfg1;
+ u32 mdcfg2;
+ u32 mdmisc;
+ u32 mdref;
+ u32 mdrwd;
+ u32 mdor;
+ u32 mdasp;
+ u32 mpodtctrl;
+ u32 mpzqhwctrl;
+ u32 mprddlctl;
+};
+
+void mmdc_init(const struct fsl_mmdc_info *);
+
#endif /* FSL_MMDC_H */
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 199f366..d04e3cc 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -51,7 +51,7 @@
struct dwc3 *dwc3_reg;
};
-#if defined(CONFIG_LS102XA) || defined(CONFIG_LS1012A)
+#if defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A)
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0