Convert CONFIG_TWL4030_LED et al to Kconfig

This converts the following to Kconfig:
   CONFIG_TWL4030_LED
   CONFIG_TWL4030_INPUT

This also removes dead references to:
   CONFIG_TWL4030_KEYPAD

Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/configs/cairo_defconfig b/configs/cairo_defconfig
index c7124cf..5c64d69 100644
--- a/configs/cairo_defconfig
+++ b/configs/cairo_defconfig
@@ -27,6 +27,7 @@
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y
diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig
index f8f1862..c78aaf9 100644
--- a/configs/cm_t35_defconfig
+++ b/configs/cm_t35_defconfig
@@ -39,6 +39,7 @@
 CONFIG_LED_STATUS_STATE=2
 CONFIG_LED_STATUS_BOOT_ENABLE=y
 CONFIG_LED_STATUS_BOOT=0
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_NAND=y
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index efb6828..41642ab 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -25,6 +25,7 @@
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index b213a18..fe2ecf6 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -22,6 +22,7 @@
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 # CONFIG_NET is not set
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index f26f5ad..0a402cc 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -50,6 +50,7 @@
 CONFIG_LED_STATUS_GREEN_ENABLE=y
 CONFIG_LED_STATUS_GREEN=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig
index c39e971..6b3fb31 100644
--- a/configs/omap3_ha_defconfig
+++ b/configs/omap3_ha_defconfig
@@ -25,6 +25,7 @@
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig
index 8b4146d..0c4a021 100644
--- a/configs/omap3_overo_defconfig
+++ b/configs/omap3_overo_defconfig
@@ -31,6 +31,7 @@
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig
index b0b9444..6dce538 100644
--- a/configs/omap3_pandora_defconfig
+++ b/configs/omap3_pandora_defconfig
@@ -25,6 +25,7 @@
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig
index 87d7228..48f3391 100644
--- a/configs/omap3_zoom1_defconfig
+++ b/configs/omap3_zoom1_defconfig
@@ -22,6 +22,7 @@
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index 8ba6bc4..269d59e 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -26,6 +26,7 @@
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_SYS_OMAP24_I2C_SPEED=400000
+CONFIG_TWL4030_INPUT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y
diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig
index d70d840..daca05e 100644
--- a/configs/tao3530_defconfig
+++ b/configs/tao3530_defconfig
@@ -25,6 +25,7 @@
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig
index 98c2cbd..f92d391 100644
--- a/configs/tricorder_defconfig
+++ b/configs/tricorder_defconfig
@@ -34,6 +34,7 @@
 CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y
diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig
index ed851c7..b44a766 100644
--- a/configs/tricorder_flash_defconfig
+++ b/configs/tricorder_flash_defconfig
@@ -33,6 +33,7 @@
 CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index b3873c1..7ffb949 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -24,3 +24,8 @@
 	  driver handles English and German keyboards - set the environment
 	  variable 'keymap' to "de" to select German. Keyboard repeat is
 	  handled by the keyboard itself.
+
+config TWL4030_INPUT
+	bool "Enable TWL4030 Input controller"
+	help
+	  Enable TWL4030 Input controller
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6bcd49a..c2b7cc1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -195,6 +195,11 @@
 	  can make requests to the BPMP. This driver is similar to an MFD
 	  driver in the Linux kernel.
 
+config TWL4030_LED
+	bool "Enable TWL4030 LED controller"
+	help
+	  Enable this to add support for the TWL4030 LED controller.
+
 config WINBOND_W83627
 	bool "Enable Winbond Super I/O driver"
 	help
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index c7ac8d1..4970a16 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -82,7 +82,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index dae76c3..1b175be 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -54,7 +54,6 @@
 #undef	CONFIG_DM9000_DEBUG
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED		1
 
 /* Board NAND Info */
 #define CONFIG_JFFS2_NAND
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index f0b512c..4bc0eca 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -92,8 +92,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
-#define CONFIG_TWL4030_KEYPAD
 
 #define GPIO_SLIDE			71
 
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 1fbe27e..7698a90 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -60,7 +60,6 @@
 /* DSS Support */
 
 /* TWL4030 LED Support */
-#define CONFIG_TWL4030_LED
 
 /* Environment */
 #define CONFIG_ENV_SIZE                 SZ_128K
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 481cad5..0133416 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -46,7 +46,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index ebbde78..35f3af4 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -29,7 +29,6 @@
 /* I2C Support */
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 81c2432..4e2eaa9 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -24,7 +24,6 @@
  */
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /*
  * NS16550 Configuration
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 8d35efd..0a02ecd 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -48,7 +48,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 7af035c..aa78684 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -60,8 +60,6 @@
  * Input
  */
 
-#define CONFIG_TWL4030_INPUT
-
 /*
  * SPL
  */
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 556219b..1384a35 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -63,7 +63,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 5fce1c6..cba4903 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -60,7 +60,6 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 83d9793..63dd154 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4497,9 +4497,6 @@
 CONFIG_TULIP_SELECT_MEDIA
 CONFIG_TULIP_USE_IO
 CONFIG_TUXX1
-CONFIG_TWL4030_INPUT
-CONFIG_TWL4030_KEYPAD
-CONFIG_TWL4030_LED
 CONFIG_TWL6030_INPUT
 CONFIG_TWL6030_POWER
 CONFIG_TWR