firmware: ti_sci: Add support for processor control services
TI-SCI message protocol provides support for controlling of various
physical cores available in SoC. In order to control which host is
capable of controlling a physical processor core, there is a processor
access control list that needs to be populated as part of the board
configuration data.
Introduce support for the set of TI-SCI message protocol apis that
provide us with this capability of controlling physical cores.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 2fc9063..81591fb 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -41,6 +41,15 @@
#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+/* Processor Control Messages */
+#define TISCI_MSG_PROC_REQUEST 0xc000
+#define TISCI_MSG_PROC_RELEASE 0xc001
+#define TISCI_MSG_PROC_HANDOVER 0xc005
+#define TISCI_MSG_SET_PROC_BOOT_CONFIG 0xc100
+#define TISCI_MSG_SET_PROC_BOOT_CTRL 0xc101
+#define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE 0xc120
+#define TISCI_MSG_GET_PROC_BOOT_STATUS 0xc400
+
/**
* struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
* @type: Type of messages: One of TI_SCI_MSG* values
@@ -496,4 +505,176 @@
u64 freq_hz;
} __packed;
+#define TISCI_ADDR_LOW_MASK GENMASK_ULL(31, 0)
+#define TISCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32)
+#define TISCI_ADDR_HIGH_SHIFT 32
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ *
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ *
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ *
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ * @host_id: New Host we want to give control to
+ *
+ * Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+ u8 host_id;
+} __packed;
+
+/* A53 Config Flags */
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN 0x00000001
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN 0x00000002
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN 0x00000004
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN 0x00000008
+#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32 0x00000100
+
+/* R5 Config Flags */
+#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001
+#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002
+#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100
+#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200
+#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400
+#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800
+#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000
+#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ * @bootvector_low: Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high: Higher 32bit (Little Endian) of boot vector
+ * @config_flags_set: Optional Processor specific Config Flags to set.
+ * Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear: Optional Processor specific Config Flags to clear.
+ * Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_proc_boot_config {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+ u32 bootvector_low;
+ u32 bootvector_high;
+ u32 config_flags_set;
+ u32 config_flags_clear;
+} __packed;
+
+/* R5 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ * @control_flags_set: Optional Processor specific Control Flags to set.
+ * Setting a bit here implies required bit sets to 1.
+ * @control_flags_clear:Optional Processor specific Control Flags to clear.
+ * Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_proc_boot_ctrl {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+ u32 control_flags_set;
+ u32 control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ * @cert_addr_low: Lower 32bit (Little Endian) of certificate
+ * @cert_addr_high: Higher 32bit (Little Endian) of certificate
+ *
+ * Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_proc_auth_boot_image {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+ u32 cert_addr_low;
+ u32 cert_addr_high;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ *
+ * Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_proc_boot_status {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+} __packed;
+
+/* ARMv8 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE 0x00000001
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI 0x00000002
+
+/* R5 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001
+#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002
+#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004
+#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100
+
+/**
+ * struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response
+ * @hdr: Generic Header
+ * @processor_id: ID of processor
+ * @bootvector_low: Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high: Higher 32bit (Little Endian) of boot vector
+ * @config_flags: Optional Processor specific Config Flags set.
+ * @control_flags: Optional Processor specific Control Flags.
+ * @status_flags: Optional Processor specific Status Flags set.
+ *
+ * Response to TISCI_MSG_GET_PROC_BOOT_STATUS.
+ */
+struct ti_sci_msg_resp_get_proc_boot_status {
+ struct ti_sci_msg_hdr hdr;
+ u8 processor_id;
+ u32 bootvector_low;
+ u32 bootvector_high;
+ u32 config_flags;
+ u32 control_flags;
+ u32 status_flags;
+} __packed;
+
#endif /* __TI_SCI_H */