sunxi: Add suport for A83T based Banana-pi M3 Board
Add dts and defconfig for Banana-pi M3 board.
It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI,
mic, AP6212 Wifi, etc on it.
It is paired with AXP813 PMIC which is almost same as AXP818.
Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
[hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
new file mode 100644
index 0000000..b96be50
--- /dev/null
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A83T=y
+CONFIG_DRAM_CLK=480
+CONFIG_DRAM_ZQ=15355
+CONFIG_DRAM_ODT_EN=y
+CONFIG_DRAM_TYPE=7
+CONFIG_SYS_EXTRA_OPTIONS=""
+#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
+#CONFIG_USB_MUSB_HOST=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP_DCDC1_VOLT=3000
+CONFIG_AXP_DCDC2_VOLT=900
+CONFIG_AXP_DCDC3_VOLT=900
+CONFIG_AXP_DCDC4_VOLT=0
+CONFIG_AXP_DCDC5_VOLT=1200
+CONFIG_AXP_ALDO2_VOLT=0
+CONFIG_AXP_ALDO3_VOLT=0
+CONFIG_AXP_DLDO4_VOLT=0