zynq: nand: Runtime detection of nand buswidth through slcr
This patch adds support to check the buswidth on nand flash
at runtime based on nand MIO configurations done by FSBL.
User needs to correctly configure the MIO's based on the
buswidth supported by the nand flash which is present on the board.
Added nand8 and nand16 @periph names on slcr driver.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 05f4099..2d3bf2a 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -14,6 +14,9 @@
#define SLCR_LOCK_MAGIC 0x767B
#define SLCR_UNLOCK_MAGIC 0xDF0D
+#define SLCR_NAND_L2_SEL 0x10
+#define SLCR_NAND_L2_SEL_MASK 0x1F
+
#define SLCR_USB_L1_SEL 0x04
#define SLCR_IDCODE_MASK 0x1F000
@@ -36,6 +39,14 @@
u32 check_val;
};
+static const int nand8_pins[] = {
+ 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
+};
+
+static const int nand16_pins[] = {
+ 16, 17, 18, 19, 20, 21, 22, 23
+};
+
static const int usb0_pins[] = {
28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
};
@@ -46,6 +57,20 @@
static const struct zynq_slcr_mio_get_status mio_periphs[] = {
{
+ "nand8",
+ nand8_pins,
+ ARRAY_SIZE(nand8_pins),
+ SLCR_NAND_L2_SEL_MASK,
+ SLCR_NAND_L2_SEL,
+ },
+ {
+ "nand16",
+ nand16_pins,
+ ARRAY_SIZE(nand16_pins),
+ SLCR_NAND_L2_SEL_MASK,
+ SLCR_NAND_L2_SEL,
+ },
+ {
"usb0",
usb0_pins,
ARRAY_SIZE(usb0_pins),