ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1
Copy the devicetree source for the H6 SoC and all existing boards
from the Linux v5.18-rc1 tag.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.
This commit also adds the following new board devicetrees:
- sun50i-h6-pine-h64-model-b.dts
- sun50i-h6-tanix-tx6-mini.dts
This update should not impact any existing U-Boot functionality.
Signed-off-by: Samuel Holland <samuel@sholland.org>
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index b580804..649b146 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -150,12 +150,28 @@
vcc-pg-supply = <®_aldo1>;
};
-&r_i2c {
+&r_ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <®_aldo1>;
+ */
+ vcc-pm-supply = <®_aldo1>;
+};
+
+&r_rsb {
status = "okay";
- axp805: pmic@36 {
+ axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x36>;
+ reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -273,22 +289,6 @@
};
};
-&r_ir {
- linux,rc-map-name = "rc-beelink-gs1";
- status = "okay";
-};
-
-&r_pio {
- /*
- * PL0 and PL1 are used for PMIC I2C
- * don't enable the pl-supply else
- * it will fail at boot
- *
- * vcc-pl-supply = <®_aldo1>;
- */
- vcc-pm-supply = <®_aldo1>;
-};
-
&spdif {
status = "okay";
};