arm: dts: imx8mp: sync dts from Linux Kernel
Sync dts from Linux Kernel
commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index 0fb29cc..ecccfbb 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include "imx8mp-pinfunc.h"
@@ -22,6 +23,12 @@
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ i2c4 = &i2c5;
+ i2c5 = &i2c6;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -43,6 +50,7 @@
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ #cooling-cells = <2>;
};
A53_1: cpu@1 {
@@ -53,6 +61,7 @@
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ #cooling-cells = <2>;
};
A53_2: cpu@2 {
@@ -63,6 +72,7 @@
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ #cooling-cells = <2>;
};
A53_3: cpu@3 {
@@ -73,6 +83,7 @@
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -122,17 +133,86 @@
clock-output-names = "clk_ext4";
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 0>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ soc-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 1>;
+ trips {
+ soc_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <8000000>;
arm,no-tick-in-suspend;
};
@@ -144,7 +224,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -215,6 +295,13 @@
gpio-ranges = <&iomuxc 0 114 30>;
};
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mp-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+ #thermal-sensor-cells = <1>;
+ };
+
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
@@ -233,7 +320,7 @@
reg = <0x30340000 0x10000>;
};
- ocotp: ocotp-ctrl@30350000 {
+ ocotp: efuse@30350000 {
compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
@@ -270,6 +357,8 @@
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+ clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
@@ -284,14 +373,36 @@
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
- assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+ assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+ <&clk IMX8MP_CLK_A53_CORE>,
+ <&clk IMX8MP_CLK_NOC>,
+ <&clk IMX8MP_CLK_NOC_IO>,
+ <&clk IMX8MP_CLK_GIC>,
+ <&clk IMX8MP_CLK_AUDIO_AHB>,
+ <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
<&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MP_AUDIO_PLL1>,
<&clk IMX8MP_AUDIO_PLL2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_ARM_PLL_OUT>,
+ <&clk IMX8MP_SYS_PLL2_1000M>,
+ <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL2_500M>,
+ <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>,
+ <1000000000>,
+ <800000000>,
+ <500000000>,
+ <400000000>,
+ <800000000>,
+ <400000000>,
+ <393216000>,
+ <361267200>;
};
- src: src@30390000 {
- compatible = "fsl,imx8mp-src", "fsl,imx8mq-src", "syscon";
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mp-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
@@ -299,7 +410,7 @@
};
aips2: bus@30400000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -348,10 +459,18 @@
#pwm-cells = <2>;
status = "disabled";
};
+
+ system_counter: timer@306a0000 {
+ compatible = "nxp,sysctr-timer";
+ reg = <0x306a0000 0x20000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc_24m>;
+ clock-names = "per";
+ };
};
aips3: bus@30800000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -433,6 +552,66 @@
status = "disabled";
};
+ flexcan1: can@308c0000 {
+ compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+ <&clk IMX8MP_CLK_CAN1_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&gpr 0x10 4>;
+ status = "disabled";
+ };
+
+ flexcan2: can@308d0000 {
+ compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x308d0000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+ <&clk IMX8MP_CLK_CAN2_ROOT>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&gpr 0x10 5>;
+ status = "disabled";
+ };
+
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_AHB>,
+ <&clk IMX8MP_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -454,7 +633,7 @@
};
i2c3: i2c@30a40000 {
- compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a40000 0x10000>;
@@ -485,6 +664,14 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+ #mbox-cells = <2>;
+ };
+
i2c5: i2c@30ad0000 {
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -506,7 +693,7 @@
};
usdhc1: mmc@30b40000 {
- compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -520,7 +707,7 @@
};
usdhc2: mmc@30b50000 {
- compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -534,7 +721,7 @@
};
usdhc3: mmc@30b60000 {
- compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -552,18 +739,19 @@
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
- <&clk IMX8MP_CLK_SDMA1_ROOT>;
+ <&clk IMX8MP_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
fec: ethernet@30be0000 {
- compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+ compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
<&clk IMX8MP_CLK_SIM_ENET_ROOT>,
<&clk IMX8MP_CLK_ENET_TIMER>,
@@ -594,5 +782,11 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
};
+
+ ddr-pmu@3d800000 {
+ compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+ reg = <0x3d800000 0x400000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};