Convert CONFIG_VIDEO_CT69000 to Kconfig
This converts the following to Kconfig:
CONFIG_VIDEO_CT69000
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d3e0a1a..f43053f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -493,6 +493,33 @@
erase functions and limited graphics rendition control). Normal
output from U-Boot will pass through this filter.
+config VIDEO_CT69000
+ bool "Enable Chips & Technologies 69000 video driver"
+ depends on VIDEO
+ help
+ This enables a frame buffer driver for the Chips & Technologies
+ ct69000, a fairly old graphics device (circa 2000) which is used
+ on some hardware. It operates over the ISA bus, and supports
+ some acceleration features.
+
+ For the CT69000 and SMI_LYNXEM drivers, videomode is
+ selected via environment 'videomode'. Two different ways
+ are possible:
+ - "videomode=num" 'num' is a standard LiLo mode numbers.
+ Following standard modes are supported (* is default):
+
+ Colors 640x480 800x600 1024x768 1152x864 1280x1024
+ -------------+---------------------------------------------
+ 8 bits | 0x301* 0x303 0x305 0x161 0x307
+ 15 bits | 0x310 0x313 0x316 0x162 0x319
+ 16 bits | 0x311 0x314 0x317 0x163 0x31A
+ 24 bits | 0x312 0x315 0x318 ? 0x31B
+ -------------+---------------------------------------------
+ (i.e. setenv videomode 317; saveenv; reset;)
+
+ - "videomode=bootargs" all the video parameters are parsed
+ from the bootargs. (See drivers/video/videomodes.c)
+
config LCD
bool "Enable legacy LCD support"
help