cmd: bind: allow to bind driver with driver data
Initial implementation invokes device_bind_with_driver_data()
with driver_data parameter equal to 0.
For driver with driver data, the bind command can't bind
correctly this driver or even worse causes data abort as shown below:
As example, for debug purpose on STM32MP1 platform, ethernet
(dwc_eth_qos.c) driver needed to be unbinded/binded.
This driver is using driver data:
static const struct udevice_id eqos_ids[] = {
{
.compatible = "nvidia,tegra186-eqos",
.data = (ulong)&eqos_tegra186_config
},
{
.compatible = "snps,dwmac-4.20a",
.data = (ulong)&eqos_stm32_config
},
{ }
};
After unbinding/binding this driver and probing it (with the dhcp command),
we got a prefetch abort as below:
STM32MP> unbind eth ethernet@5800a000
STM32MP> bind /soc/ethernet@5800a000 eth_eqos
STM32MP> dhcp
prefetch abort
pc : [<4310801c>] lr : [<ffc8f4ad>]
reloc pc : [<035ba01c>] lr : [<c01414ad>]
sp : fdaf19b0 ip : ffcea83c fp : 00000001
r10: ffcfd4a0 r9 : fdaffed0 r8 : 00000000
r7 : ffcff304 r6 : fdc63220 r5 : 00000000 r4 : fdc5b108
r3 : 43108020 r2 : 00003d39 r1 : ffcea544 r0 : fdc63220
Flags: nZCv IRQs off FIQs off Mode SVC_32
Code: data abort
pc : [<ffc4f9c0>] lr : [<ffc4f9ad>]
reloc pc : [<c01019c0>] lr : [<c01019ad>]
sp : fdaf18b8 ip : 00000000 fp : 00000001
r10: ffcd69b2 r9 : fdaffed0 r8 : ffcd69aa
r7 : 00000000 r6 : 00000008 r5 : 4310801c r4 : fffffffc
r3 : 00000001 r2 : 00000028 r1 : 00000000 r0 : 00000006
Flags: NzCv IRQs on FIQs on Mode SVC_32 (T)
Code: 2f00 d1e9 2c00 dce9 (f855) 2024
Resetting CPU ...
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
1 file changed