misc: Add MPC83xx serdes driver
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on
the MPC83xx architecture.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt b/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt
new file mode 100644
index 0000000..64a9b5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt
@@ -0,0 +1,24 @@
+MPC83xx SerDes controller devices
+
+MPC83xx SoCs contain a built-in SerDes controller that determines which
+protocols (SATA, PCI Express, SGMII, ...) are used on the system's serdes lines
+and how the lines are configured.
+
+Required properties:
+- compatible: must be "fsl,mpc83xx-serdes"
+- reg: must point to the serdes controller's register map
+- proto: selects for which protocol the serdes lines are configured. One of
+ "sata", "pex", "pex-x2", "sgmii"
+- serdes-clk: determines the frequency the serdes lines are configured for. One
+ of 100, 125, 150.
+- vdd: determines whether 1.0V core VDD is used or not
+
+Example:
+
+SERDES: serdes@e3000 {
+ reg = <0xe3000 0x200>;
+ compatible = "fsl,mpc83xx-serdes";
+ proto = "pex";
+ serdes-clk = <100>;
+ vdd;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 9ff3bbe..237a022 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -529,6 +529,7 @@
F: drivers/timer/mpc83xx_timer.c
F: drivers/cpu/mpc83xx_cpu.c
F: drivers/cpu/mpc83xx_cpu.h
+F: drivers/misc/mpc83xx_serdes.c
F: arch/powerpc/cpu/mpc83xx/
F: arch/powerpc/include/asm/arch-mpc83xx/
diff --git a/arch/powerpc/cpu/mpc83xx/serdes.c b/arch/powerpc/cpu/mpc83xx/serdes.c
index 982a447..8242f95 100644
--- a/arch/powerpc/cpu/mpc83xx/serdes.c
+++ b/arch/powerpc/cpu/mpc83xx/serdes.c
@@ -8,6 +8,8 @@
* Author: Li Yang <leoli@freescale.com>
*/
+#ifndef CONFIG_MPC83XX_SERDES
+
#include <config.h>
#include <common.h>
#include <asm/io.h>
@@ -148,3 +150,5 @@
tmp |= FSL_SRDSRSTCTL_RST;
out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
}
+
+#endif /* !CONFIG_MPC83XX_SERDES */
diff --git a/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h b/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h
index e51d060..a02b599 100644
--- a/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h
+++ b/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h
@@ -6,6 +6,8 @@
#ifndef __FSL_MPC83XX_SERDES_H
#define __FSL_MPC83XX_SERDES_H
+#ifndef CONFIG_MPC83XX_SERDES
+
#include <config.h>
#define FSL_SERDES_CLK_100 (0 << 28)
@@ -19,4 +21,6 @@
extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd);
+#endif /* !CONFIG_MPC83XX_SERDES */
+
#endif /* __FSL_MPC83XX_SERDES_H */
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c2b7cc1..bfa5c91 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -288,4 +288,11 @@
depends on MISC
help
Support gdsys FPGA's IO endpoint driver.
+
+config MPC83XX_SERDES
+ bool "Enable MPC83xx serdes driver"
+ depends on MISC
+ help
+ Support for serdes found on MPC83xx SoCs.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 32ef4a5..da4666f 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -55,3 +55,4 @@
obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
+obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
diff --git a/drivers/misc/mpc83xx_serdes.c b/drivers/misc/mpc83xx_serdes.c
new file mode 100644
index 0000000..d572dda
--- /dev/null
+++ b/drivers/misc/mpc83xx_serdes.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ *
+ * base on the MPC83xx serdes initialization, which is
+ *
+ * Copyright 2007,2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 MontaVista Software, Inc.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <misc.h>
+
+#include "mpc83xx_serdes.h"
+
+/**
+ * struct mpc83xx_serdes_priv - Private structure for MPC83xx serdes
+ * @regs: The device's register map
+ * @rfcks: Variable to keep the serdes reference clock selection set during
+ * initialization in (is or'd to every value written to SRDSCR4)
+ */
+struct mpc83xx_serdes_priv {
+ struct mpc83xx_serdes_regs *regs;
+ u32 rfcks;
+};
+
+/**
+ * setup_sata() - Configure the SerDes device to SATA mode
+ * @dev: The device to configure
+ */
+static void setup_sata(struct udevice *dev)
+{
+ struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
+
+ /* Set and clear reset bits */
+ setbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_SATA_RESET);
+ udelay(1000);
+ clrbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_SATA_RESET);
+
+ /* Configure SRDSCR0 */
+ clrsetbits_be32(&priv->regs->srdscr0,
+ SRDSCR0_TXEQA_MASK | SRDSCR0_TXEQE_MASK,
+ SRDSCR0_TXEQA_SATA | SRDSCR0_TXEQE_SATA);
+
+ /* Configure SRDSCR1 */
+ clrbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(&priv->regs->srdscr2,
+ SRDSCR2_SEIC_MASK,
+ SRDSCR2_SEIC_SATA);
+
+ /* Configure SRDSCR3 */
+ out_be32(&priv->regs->srdscr3,
+ SRDSCR3_KFR_SATA | SRDSCR3_KPH_SATA |
+ SRDSCR3_SDFM_SATA_PEX | SRDSCR3_SDTXL_SATA);
+
+ /* Configure SRDSCR4 */
+ out_be32(&priv->regs->srdscr4, priv->rfcks | SRDSCR4_PROT_SATA);
+}
+
+/**
+ * setup_pex() - Configure the SerDes device to PCI Express mode
+ * @dev: The device to configure
+ * @type: The PCI Express type to configure for (x1 or x2)
+ */
+static void setup_pex(struct udevice *dev, enum pex_type type)
+{
+ struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
+
+ /* Configure SRDSCR1 */
+ setbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(&priv->regs->srdscr2,
+ SRDSCR2_SEIC_MASK,
+ SRDSCR2_SEIC_PEX);
+
+ /* Configure SRDSCR3 */
+ out_be32(&priv->regs->srdscr3, SRDSCR3_SDFM_SATA_PEX);
+
+ /* Configure SRDSCR4 */
+ if (type == PEX_X2)
+ out_be32(&priv->regs->srdscr4,
+ priv->rfcks | SRDSCR4_PROT_PEX | SRDSCR4_PLANE_X2);
+ else
+ out_be32(&priv->regs->srdscr4,
+ priv->rfcks | SRDSCR4_PROT_PEX);
+}
+
+/**
+ * setup_sgmii() - Configure the SerDes device to SGMII mode
+ * @dev: The device to configure
+ */
+static void setup_sgmii(struct udevice *dev)
+{
+ struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
+
+ /* Configure SRDSCR1 */
+ clrbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
+
+ /* Configure SRDSCR2 */
+ clrsetbits_be32(&priv->regs->srdscr2,
+ SRDSCR2_SEIC_MASK,
+ SRDSCR2_SEIC_SGMII);
+
+ /* Configure SRDSCR3 */
+ out_be32(&priv->regs->srdscr3, 0);
+
+ /* Configure SRDSCR4 */
+ out_be32(&priv->regs->srdscr4, priv->rfcks | SRDSCR4_PROT_SGMII);
+}
+
+static int mpc83xx_serdes_probe(struct udevice *dev)
+{
+ struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
+ bool vdd;
+ const char *proto;
+
+ priv->regs = map_sysmem(dev_read_addr(dev),
+ sizeof(struct mpc83xx_serdes_regs));
+
+ switch (dev_read_u32_default(dev, "serdes-clk", -1)) {
+ case 100:
+ priv->rfcks = SRDSCR4_RFCKS_100;
+ break;
+ case 125:
+ priv->rfcks = SRDSCR4_RFCKS_125;
+ break;
+ case 150:
+ priv->rfcks = SRDSCR4_RFCKS_150;
+ break;
+ default:
+ debug("%s: Could not read serdes clock value\n", dev->name);
+ return -EINVAL;
+ }
+
+ vdd = dev_read_bool(dev, "vdd");
+
+ /* 1.0V corevdd */
+ if (vdd) {
+ /* DPPE/DPPA = 0 */
+ clrbits_be32(&priv->regs->srdscr0, SRDSCR0_DPP_1V2);
+
+ /* VDD = 0 */
+ clrbits_be32(&priv->regs->srdscr0, SRDSCR2_VDD_1V2);
+ }
+
+ proto = dev_read_string(dev, "proto");
+
+ /* protocol specific configuration */
+ if (!strcmp(proto, "sata")) {
+ setup_sata(dev);
+ } else if (!strcmp(proto, "pex")) {
+ setup_pex(dev, PEX_X1);
+ } else if (!strcmp(proto, "pex-x2")) {
+ setup_pex(dev, PEX_X2);
+ } else if (!strcmp(proto, "sgmii")) {
+ setup_sgmii(dev);
+ } else {
+ debug("%s: Invalid protocol value %s\n", dev->name, proto);
+ return -EINVAL;
+ }
+
+ /* Do a software reset */
+ setbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_RST);
+
+ return 0;
+}
+
+static const struct udevice_id mpc83xx_serdes_ids[] = {
+ { .compatible = "fsl,mpc83xx-serdes" },
+ { }
+};
+
+U_BOOT_DRIVER(mpc83xx_serdes) = {
+ .name = "mpc83xx_serdes",
+ .id = UCLASS_MISC,
+ .of_match = mpc83xx_serdes_ids,
+ .probe = mpc83xx_serdes_probe,
+ .priv_auto_alloc_size = sizeof(struct mpc83xx_serdes_priv),
+};
diff --git a/drivers/misc/mpc83xx_serdes.h b/drivers/misc/mpc83xx_serdes.h
new file mode 100644
index 0000000..89ea1db
--- /dev/null
+++ b/drivers/misc/mpc83xx_serdes.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ */
+
+/**
+ * enum srdscr0_mask - Bit masks for SRDSCR0 (SerDes Control Register 0)
+ * @SRDSCR0_DPPA: Bitmask for the DPPA (diff pk-pk swing for lane A)
+ * field of the SRCSCR0
+ * @SRDSCR0_DPPE: Bitmask for the DPPE (diff pk-pk swing for lane E)
+ * field of the SRCSCR0
+ * @SRDSCR0_DPP_1V2: Combined bitmask to set diff pk-pk swing for both lanes
+ * @SRDSCR0_TXEQA_MASK: Bitmask for the TXEQA (transmit equalization for
+ * lane A) field of the SRCSCR0
+ * @SRDSCR0_TXEQA_SATA: Bitmask to set the TXEQA to the value used for SATA
+ * @SRDSCR0_TXEQE_MASK: Bitmask for the TXEQE (transmit equalization for
+ * lane E) field of the SRCSCR0
+ * @SRDSCR0_TXEQE_SATA: Bitmask to set the TXEQE to the value used for SATA
+ */
+enum srdscr0_mask {
+ SRDSCR0_DPPA = BIT(31 - 16),
+ SRDSCR0_DPPE = BIT(31 - 20),
+ SRDSCR0_DPP_1V2 = SRDSCR0_DPPE | SRDSCR0_DPPA,
+
+ SRDSCR0_TXEQA_MASK = 0x00007000,
+ SRDSCR0_TXEQA_SATA = 0x00001000,
+ SRDSCR0_TXEQE_MASK = 0x00000700,
+ SRDSCR0_TXEQE_SATA = 0x00000100,
+};
+
+/**
+ * enum srdscr1_mask - Bit masks for SRDSCR1 (SerDes Control Register 1)
+ * @SRDSCR1_PLLBW: Bitmask for the PLLBW (PLL bandwidth) field of SRDSCR1
+ */
+enum srdscr1_mask {
+ SRDSCR1_PLLBW = BIT(31 - 25),
+};
+
+/**
+ * enum srdscr2_mask - Bit masks for SRDSCR2 (SerDes Control Register 2)
+ * @SRDSCR2_VDD_1V2: Bit mask to to set the VDD field of the SCRSCR2
+ * @SRDSCR2_SEICA_MASK: Bitmask for the SEICA (Receiver electrical idle
+ * detection control for lane A) field of the SRCSCR2
+ * @SRDSCR2_SEICE_MASK: Bitmask for the SEICE (Receiver electrical idle
+ * detection control for lane E) field of the SRCSCR2
+ * @SRDSCR2_SEIC_MASK: Combined bitmask to set the receiver electrical idle
+ * detection control for both lanes
+ * @SRDSCR2_SEICA_SATA: Bitmask to set the SEICA field to the value used for
+ * SATA
+ * @SRDSCR2_SEICE_SATA: Bitmask to set the SEICE field to the value used for
+ * SATA
+ * @SRDSCR2_SEIC_SATA: Combined bitmask to set the value of both SEIC fields
+ * to the value used for SATA
+ * @SRDSCR2_SEICA_PEX: Bitmask to set the SEICA field to the value used for
+ * PCI Express
+ * @SRDSCR2_SEICE_PEX: Bitmask to set the SEICE field to the value used for
+ * PCI Express
+ * @SRDSCR2_SEIC_PEX: Combined bitmask to set the value of both SEIC fields
+ * to the value used for PCI Express
+ * @SRDSCR2_SEICA_SGMII: Bitmask to set the SEICA field to the value used for
+ * SGMII
+ * @SRDSCR2_SEICE_SGMII: Bitmask to set the SEICE field to the value used for
+ * SGMII
+ * @SRDSCR2_SEIC_SGMII: Combined bitmask to set the value of both SEIC fields
+ * to the value used for SGMII
+ */
+enum srdscr2_mask {
+ SRDSCR2_VDD_1V2 = 0x00800000,
+
+ SRDSCR2_SEICA_MASK = 0x00001c00,
+ SRDSCR2_SEICE_MASK = 0x0000001c,
+ SRDSCR2_SEIC_MASK = SRDSCR2_SEICA_MASK | SRDSCR2_SEICE_MASK,
+
+ SRDSCR2_SEICA_SATA = 0x00001400,
+ SRDSCR2_SEICE_SATA = 0x00000014,
+ SRDSCR2_SEIC_SATA = SRDSCR2_SEICA_SATA | SRDSCR2_SEICE_SATA,
+
+ SRDSCR2_SEICA_PEX = 0x00001000,
+ SRDSCR2_SEICE_PEX = 0x00000010,
+ SRDSCR2_SEIC_PEX = SRDSCR2_SEICA_PEX | SRDSCR2_SEICE_PEX,
+
+ SRDSCR2_SEICA_SGMII = 0x00000100,
+ SRDSCR2_SEICE_SGMII = 0x00000001,
+ SRDSCR2_SEIC_SGMII = SRDSCR2_SEICA_SGMII | SRDSCR2_SEICE_SGMII,
+};
+
+/**
+ * enum srdscr3_mask - Bit masks for SRDSCR3 (SerDes Control Register 3)
+ * @SRDSCR3_KFRA_SATA: Bitmask to set the KFRA field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_KFRE_SATA: Bitmask to set the KFRE field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_KFR_SATA: Combined bitmask to set both KFR fields to the
+ * value used by SATA
+ * @SRDSCR3_KPHA_SATA: Bitmask to set the KPHA field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_KPHE_SATA: Bitmask to set the KPHE field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_KPH_SATA: Combined bitmask to set both KPH fields to the
+ * value used by SATA
+ * @SRDSCR3_SDFMA_SATA_PEX: Bitmask to set the SDFMA field of SRDSCR3 to the
+ * value used by SATA and PCI Express
+ * @SRDSCR3_SDFME_SATA_PEX: Bitmask to set the SDFME field of SRDSCR3 to the
+ * value used by SATA and PCI Express
+ * @SRDSCR3_SDFM_SATA_PEX: Combined bitmask to set both SDFM fields to the
+ * value used by SATA and PCI Express
+ * @SRDSCR3_SDTXLA_SATA: Bitmask to set the SDTXLA field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_SDTXLE_SATA: Bitmask to set the SDTXLE field of SRDSCR3 to the
+ * value used by SATA
+ * @SRDSCR3_SDTXL_SATA: Combined bitmask to set both SDTXL fields to the
+ * value used by SATA
+ *
+ * KFRA = 'Kfr' gain selection in the CDR for lane A
+ * KFRE = 'Kfr' gain selection in the CDR for lane E
+ * SDFMA = Bandwidth of digital filter for lane A
+ * SDFME = Bandwidth of digital filter for lane E
+ * SDTXLA = Lane A transmitter amplitude levels
+ * SDTXLE = Lane E transmitter amplitude levels
+ */
+enum srdscr3_mask {
+ SRDSCR3_KFRA_SATA = 0x10000000,
+ SRDSCR3_KFRE_SATA = 0x00100000,
+ SRDSCR3_KFR_SATA = SRDSCR3_KFRA_SATA | SRDSCR3_KFRE_SATA,
+
+ SRDSCR3_KPHA_SATA = 0x04000000,
+ SRDSCR3_KPHE_SATA = 0x00040000,
+ SRDSCR3_KPH_SATA = SRDSCR3_KPHA_SATA | SRDSCR3_KPHE_SATA,
+
+ SRDSCR3_SDFMA_SATA_PEX = 0x01000000,
+ SRDSCR3_SDFME_SATA_PEX = 0x00010000,
+ SRDSCR3_SDFM_SATA_PEX = SRDSCR3_SDFMA_SATA_PEX | SRDSCR3_SDFME_SATA_PEX,
+
+ SRDSCR3_SDTXLA_SATA = 0x00000500,
+ SRDSCR3_SDTXLE_SATA = 0x00000005,
+ SRDSCR3_SDTXL_SATA = SRDSCR3_SDTXLA_SATA | SRDSCR3_SDTXLE_SATA,
+};
+
+/**
+ * enum srdscr4_mask - Bit masks for SRDSCR4 (SerDes Control Register 4)
+ * @SRDSCR4_PROTA_SATA: Bitmask to set the PROTA field of SRDSCR4 to the
+ * value used by SATA
+ * @SRDSCR4_PROTE_SATA: Bitmask to set the PROTE field of SRDSCR4 to the
+ * value used by SATA
+ * @SRDSCR4_PROT_SATA: Combined bitmask to set both PROT fields to the
+ * value used by SATA
+ * @SRDSCR4_PROTA_PEX: Bitmask to set the PROTA field of SRDSCR4 to the
+ * value used by PCI Express
+ * @SRDSCR4_PROTE_PEX: Bitmask to set the PROTE field of SRDSCR4 to the
+ * value used by PCI Express
+ * @SRDSCR4_PROT_PEX: Combined bitmask to set both PROT fields to the
+ * value used by PCI Express
+ * @SRDSCR4_PROTA_SGMII: Bitmask to set the PROTA field of SRDSCR4 to the
+ * value used by SGMII
+ * @SRDSCR4_PROTE_SGMII: Bitmask to set the PROTE field of SRDSCR4 to the
+ * value used by SGMII
+ * @SRDSCR4_PROT_SGMII: Combined bitmask to set both PROT fields to the
+ * value used by SGMII
+ * @SRDSCR4_PLANE_X2: Bitmask to set the PLANE field of SRDSCR4
+ * @SRDSCR4_RFCKS_100: Bitmask to set the RFCKS field of SRDSCR4 to the
+ * value 100Mhz
+ * @SRDSCR4_RFCKS_125: Bitmask to set the RFCKS field of SRDSCR4 to the
+ * value 125Mhz
+ * @SRDSCR4_RFCKS_150: Bitmask to set the RFCKS field of SRDSCR4 to the
+ * value 150Mhz
+ *
+ * PROTA = Lane A protocol select
+ * PROTE = Lane E protocol select
+ * PLAME = Number of PCI Express lanes
+ */
+enum srdscr4_mask {
+ SRDSCR4_PROTA_SATA = 0x00000800,
+ SRDSCR4_PROTE_SATA = 0x00000008,
+ SRDSCR4_PROT_SATA = SRDSCR4_PROTA_SATA | SRDSCR4_PROTE_SATA,
+
+ SRDSCR4_PROTA_PEX = 0x00000100,
+ SRDSCR4_PROTE_PEX = 0x00000001,
+ SRDSCR4_PROT_PEX = SRDSCR4_PROTA_PEX | SRDSCR4_PROTE_PEX,
+
+ SRDSCR4_PROTA_SGMII = 0x00000500,
+ SRDSCR4_PROTE_SGMII = 0x00000005,
+ SRDSCR4_PROT_SGMII = SRDSCR4_PROTA_SGMII | SRDSCR4_PROTE_SGMII,
+
+ SRDSCR4_PLANE_X2 = 0x01000000,
+
+ SRDSCR4_RFCKS_100 = (0 << 28),
+ SRDSCR4_RFCKS_125 = (1 << 28),
+ SRDSCR4_RFCKS_150 = (3 << 28),
+};
+
+/**
+ * enum srdsrstctl_mask - Bit masks for SRDSRSTCTL (SerDes Reset Control Register)
+ * @SRDSRSTCTL_RST: Bitmask for the RST (Software reset) field of the
+ * SRDSRSTCTL
+ * @SRDSRSTCTL_SATA_RESET: Bitmask for the SATA_RESET (SATA reset) field of the
+ * SRDSRSTCTL
+ */
+enum srdsrstctl_mask {
+ SRDSRSTCTL_RST = 0x80000000,
+ SRDSRSTCTL_SATA_RESET = 0xf,
+};
+
+/**
+ * struct mpc83xx_serdes_regs - Register map of the SerDes controller
+ * @srdscr0: SerDes Control Register 0
+ * @srdscr1: SerDes Control Register 1
+ * @srdscr2: SerDes Control Register 2
+ * @srdscr3: SerDes Control Register 3
+ * @srdscr4: SerDes Control Register 4
+ * @fill0: Reserved space in the register map
+ * @srdsrstctl: SerDes Reset Control Register
+ */
+struct mpc83xx_serdes_regs {
+ u32 srdscr0;
+ u32 srdscr1;
+ u32 srdscr2;
+ u32 srdscr3;
+ u32 srdscr4;
+ u8 fill0[12];
+ u32 srdsrstctl;
+};
+
+/**
+ * enum pex_type - Types of PCI Express
+ * @PEX_X1: PCI Express in x1 mode
+ * @PEX_X2: PCI Express in x2 mode
+ */
+enum pex_type {
+ PEX_X1,
+ PEX_X2,
+};