fsl_ddr: Move DDR config options to driver Kconfig
Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.
Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 698370b..52a9f39 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -770,6 +770,7 @@
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
+ select SYS_FSL_DDR
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index d154f7b..eca1d06 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -3,8 +3,10 @@
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
- select SYS_FSL_DDR_BE
- select SYS_FSL_DDR_VER_50
+ select SYS_FSL_DDR_BE if SYS_FSL_DDR
+ select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
+ select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
+ select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
@@ -49,47 +51,6 @@
config SYS_HAS_SERDES
bool
-config SYS_FSL_DDR
- bool "Freescale DDR driver"
- help
- Select Freescale General DDR driver, shared between most Freescale
- PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
- based Layerscape SoCs (such as ls2080a).
-
-config SYS_FSL_DDR_BE
- bool
- default y
- help
- Access DDR registers in big-endian.
-
-config SYS_FSL_DDR_VER
- int
- default 50 if SYS_FSL_DDR_VER_50
-
-config SYS_FSL_DDR_VER_50
- bool
-
-config SYS_FSL_DDRC_ARM_GEN3
- bool
-
-config SYS_FSL_DDRC_GEN4
- bool
-
-config SYS_FSL_DDR3
- bool "Freescale DDR3 controller"
- depends on !SYS_FSL_DDR4
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_ARM_GEN3
- help
- Enable Freescale DDR3 controller on ARM-based SoCs.
-
-config SYS_FSL_DDR4
- bool "Freescale DDR4 controller"
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_GEN4
- help
- Enable Freescale DDR4 controller.
-
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
depends on ARCH_LS1021A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index a1f781e..bee7d15 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -8,28 +8,33 @@
config ARCH_LS1043A
bool
select FSL_LSCH2
+ select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
config ARCH_LS1046A
bool
select FSL_LSCH2
+ select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- select SYS_FSL_DDR4
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
config ARCH_LS2080A
bool
select FSL_LSCH3
- select SYS_FSL_DDR4
+ select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_HAS_DP_DDR
select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
@@ -71,9 +76,6 @@
implemented under the common ARMv8 PSCI framework.
endmenu
-config SYS_FSL_MMDC
- bool
-
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
@@ -129,49 +131,4 @@
config SYS_HAS_SERDES
bool
-config SYS_FSL_DDR
- bool "Freescale DDR driver"
- help
- Select Freescale General DDR driver, shared between most Freescale
- PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
- based Layerscape SoCs (such as ls2080a).
-
-config SYS_FSL_DDR_BE
- bool
- help
- Access DDR registers in big-endian.
-
-config SYS_FSL_DDR_LE
- bool
- help
- Access DDR registers in little-endian.
-
-config SYS_FSL_DDR_VER
- int
- default 50 if SYS_FSL_DDR_VER_50
-
-config SYS_FSL_DDR_VER_50
- bool
-
-config SYS_FSL_DDRC_ARM_GEN3
- bool
-
-config SYS_FSL_DDRC_GEN4
- bool
-
-config SYS_FSL_DDR3
- bool "Freescale DDR3 controller"
- depends on !SYS_FSL_DDR4
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_ARM_GEN3
- help
- Enable Freescale DDR3 controller on ARM-based SoCs.
-
-config SYS_FSL_DDR4
- bool "Freescale DDR4 controller"
- select SYS_FSL_DDR
- select SYS_FSL_DDRC_GEN4
- help
- Enable Freescale DDR4 controller.
-
endmenu
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 29fc33d..db40669 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -175,11 +175,11 @@
#define CONFIG_SYS_FSL_ERRATUM_A009942
#define CONFIG_SYS_FSL_ERRATUM_A009660
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
-#elif defined(CONFIG_ARCH_LS1012A)
-#undef CONFIG_SYS_FSL_DDRC_ARM_GEN3
+#elif defined(CONFIG_ARCH_LS1012A)
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
+
#elif defined(CONFIG_ARCH_LS1046A)
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 853e265..0033c35 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -30,9 +30,13 @@
config MPC85xx
bool "MPC85xx"
select CREATE_ARCH_SYMLINK
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_BE
config MPC86xx
bool "MPC86xx"
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_BE
config 8xx
bool "MPC8xx"
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 3ea62ca..6e4a931 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -38,6 +38,9 @@
config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
+ select SYS_FSL_DDR
+ select SYS_FSL_HAS_DDR2
+ select SYS_FSL_DDR_BE
config TARGET_MPC8349ITX
bool "Support MPC8349ITX"
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 7b000d7..307a45d 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -68,6 +68,8 @@
config TARGET_MPC8536DS
bool "Support MPC8536DS"
select ARCH_MPC8536
+# Use DDR3 controller with DDR2 DIMMs on this board
+ select SYS_FSL_DDRC_GEN3
config TARGET_MPC8540ADS
bool "Support MPC8540ADS"
@@ -104,6 +106,8 @@
config TARGET_MPC8572DS
bool "Support MPC8572DS"
select ARCH_MPC8572
+# Use DDR3 controller with DDR2 DIMMs on this board
+ select SYS_FSL_DDRC_GEN3
config TARGET_P1010RDB_PA
bool "Support P1010RDB_PA"
@@ -300,6 +304,8 @@
config TARGET_XPEDITE537X
bool "Support xpedite537x"
select ARCH_MPC8572
+# Use DDR3 controller with DDR2 DIMMs on this board
+ select SYS_FSL_DDRC_GEN3
config TARGET_XPEDITE550X
bool "Support xpedite550x"
@@ -325,6 +331,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -333,6 +340,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -340,6 +348,7 @@
config ARCH_BSC9131
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -347,6 +356,7 @@
config ARCH_BSC9132
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -355,6 +365,7 @@
config ARCH_C29X
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_6
@@ -363,6 +374,8 @@
config ARCH_MPC8536
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR2
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -371,10 +384,12 @@
config ARCH_MPC8540
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
config ARCH_MPC8541
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -382,6 +397,7 @@
config ARCH_MPC8544
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR2
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -390,6 +406,8 @@
config ARCH_MPC8548
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR2
+ select SYS_FSL_HAS_DDR1
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -398,6 +416,7 @@
config ARCH_MPC8555
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -405,10 +424,12 @@
config ARCH_MPC8560
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
config ARCH_MPC8568
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR2
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -416,6 +437,7 @@
config ARCH_MPC8569
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -423,14 +445,17 @@
config ARCH_MPC8572
bool
select FSL_LAW
- select SYS_PPC_E500_USE_DEBUG_TLB
+ select SYS_FSL_HAS_DDR2
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
+ select SYS_PPC_E500_USE_DEBUG_TLB
config ARCH_P1010
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -439,6 +464,7 @@
config ARCH_P1011
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -447,6 +473,7 @@
config ARCH_P1020
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -455,6 +482,7 @@
config ARCH_P1021
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -463,6 +491,7 @@
config ARCH_P1022
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -471,6 +500,7 @@
config ARCH_P1023
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -478,6 +508,7 @@
config ARCH_P1024
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -486,6 +517,7 @@
config ARCH_P1025
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -494,6 +526,7 @@
config ARCH_P2020
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
@@ -503,6 +536,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -511,6 +545,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -519,6 +554,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -527,6 +563,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -535,6 +572,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -546,6 +584,8 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
@@ -554,6 +594,8 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
@@ -562,6 +604,8 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
@@ -570,6 +614,8 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
@@ -578,6 +624,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -586,6 +633,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -594,6 +642,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
@@ -602,6 +651,7 @@
bool
select E500MC
select FSL_LAW
+ select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig
index 11afffa..ff21c48 100644
--- a/arch/powerpc/cpu/mpc86xx/Kconfig
+++ b/arch/powerpc/cpu/mpc86xx/Kconfig
@@ -29,10 +29,14 @@
config ARCH_MPC8610
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
+ select SYS_FSL_HAS_DDR2
config ARCH_MPC8641
bool
select FSL_LAW
+ select SYS_FSL_HAS_DDR1
+ select SYS_FSL_HAS_DDR2
config FSL_LAW
bool
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d4f05d1..55686a1 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -9,16 +9,13 @@
#ifdef CONFIG_MPC85xx
#include <asm/config_mpc85xx.h>
-#define CONFIG_SYS_FSL_DDR
#endif
#ifdef CONFIG_MPC86xx
#include <asm/config_mpc86xx.h>
-#define CONFIG_SYS_FSL_DDR
#endif
#ifdef CONFIG_MPC83xx
-#define CONFIG_SYS_FSL_DDR
#endif
#ifndef HWCONFIG_BUFFER_SIZE
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 4e9fcc8..6aee5bc 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -16,7 +16,6 @@
#define CONFIG_PPC_SPINTABLE_COMPATIBLE
#include <fsl_ddrc_version.h>
-#define CONFIG_SYS_FSL_DDR_BE
/* IP endianness */
#define CONFIG_SYS_FSL_IFC_BE
@@ -28,17 +27,13 @@
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8540)
-#define CONFIG_SYS_FSL_DDRC_GEN1
#elif defined(CONFIG_ARCH_MPC8541)
-#define CONFIG_SYS_FSL_DDRC_GEN1
#elif defined(CONFIG_ARCH_MPC8544)
-#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8548)
-#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
@@ -52,13 +47,10 @@
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x00
#elif defined(CONFIG_ARCH_MPC8555)
-#define CONFIG_SYS_FSL_DDRC_GEN1
#elif defined(CONFIG_ARCH_MPC8560)
-#define CONFIG_SYS_FSL_DDRC_GEN1
#elif defined(CONFIG_ARCH_MPC8568)
-#define CONFIG_SYS_FSL_DDRC_GEN2
#define QE_MURAM_SIZE 0x10000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
@@ -544,9 +536,6 @@
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
-#ifdef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDRC_GEN4
-#endif
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_SRDS_1
@@ -588,9 +577,6 @@
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#define CONFIG_SYS_FMAN_V3
-#ifdef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDRC_GEN4
-#endif
#define CONFIG_SYS_FSL_NUM_CC_PLL 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_SRDS_1
@@ -697,13 +683,6 @@
#define CONFIG_SYS_FSL_THREADS_PER_CORE 1
#endif
-#if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \
- !defined(CONFIG_SYS_FSL_DDRC_GEN2) && \
- !defined(CONFIG_SYS_FSL_DDRC_GEN3) && \
- !defined(CONFIG_SYS_FSL_DDRC_GEN4)
-#define CONFIG_SYS_FSL_DDRC_GEN3
-#endif
-
#if !defined(CONFIG_ARCH_C29X)
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#endif
diff --git a/arch/powerpc/include/asm/config_mpc86xx.h b/arch/powerpc/include/asm/config_mpc86xx.h
index f053b9c..5eabe6d 100644
--- a/arch/powerpc/include/asm/config_mpc86xx.h
+++ b/arch/powerpc/include/asm/config_mpc86xx.h
@@ -7,6 +7,4 @@
#ifndef _ASM_MPC86xx_CONFIG_H_
#define _ASM_MPC86xx_CONFIG_H_
-#define CONFIG_SYS_FSL_DDR_86XX
-
#endif /* _ASM_MPC85xx_CONFIG_H_ */