scsi: ceva: Clean up the driver code
Distinguish the ecc val by chassis version and move the ecc addr to dts.
Add ls1028a soc support.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c
index 8887be9..2d49630 100644
--- a/drivers/ata/sata_ceva.c
+++ b/drivers/ata/sata_ceva.c
@@ -8,6 +8,7 @@
#include <ahci.h>
#include <scsi.h>
#include <asm/io.h>
+#include <linux/ioport.h>
/* Vendor Specific Register Offsets */
#define AHCI_VEND_PCFG 0xA4
@@ -88,20 +89,16 @@
#define LS1021_CEVA_PHY4_CFG 0x064a080b
#define LS1021_CEVA_PHY5_CFG 0x2aa86470
-/* for ls1088a */
-#define LS1088_ECC_DIS_ADDR_CH2 0x100520
-#define LS1088_ECC_DIS_VAL_CH2 0x40000000
-
-/* ecc addr-val pair */
-#define ECC_DIS_ADDR_CH2 0x20140520
+/* ecc val pair */
+#define ECC_DIS_VAL_CH1 0x00020000
#define ECC_DIS_VAL_CH2 0x80000000
-#define SATA_ECC_REG_ADDR 0x20220520
-#define SATA_ECC_DISABLE 0x00020000
+#define ECC_DIS_VAL_CH3 0x40000000
enum ceva_soc {
CEVA_1V84,
CEVA_LS1012A,
CEVA_LS1021A,
+ CEVA_LS1028A,
CEVA_LS1043A,
CEVA_LS1046A,
CEVA_LS1088A,
@@ -110,12 +107,14 @@
struct ceva_sata_priv {
ulong base;
+ ulong ecc_base;
enum ceva_soc soc;
ulong flag;
};
static int ceva_init_sata(struct ceva_sata_priv *priv)
{
+ ulong ecc_addr = priv->ecc_base;
ulong base = priv->base;
ulong tmp;
@@ -132,38 +131,42 @@
break;
case CEVA_LS1021A:
- writel(SATA_ECC_DISABLE, SATA_ECC_REG_ADDR);
+ if (!ecc_addr)
+ return -EINVAL;
+ writel(ECC_DIS_VAL_CH1, ecc_addr);
writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
writel(LS1021_CEVA_PHY2_CFG, base + AHCI_VEND_PP2C);
writel(LS1021_CEVA_PHY3_CFG, base + AHCI_VEND_PP3C);
writel(LS1021_CEVA_PHY4_CFG, base + AHCI_VEND_PP4C);
writel(LS1021_CEVA_PHY5_CFG, base + AHCI_VEND_PP5C);
writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
- if (priv->flag & FLAG_COHERENT)
- writel(CEVA_AXICC_CFG, base + LS1021_AHCI_VEND_AXICC);
break;
case CEVA_LS1012A:
case CEVA_LS1043A:
case CEVA_LS1046A:
- writel(ECC_DIS_VAL_CH2, ECC_DIS_ADDR_CH2);
+ if (!ecc_addr)
+ return -EINVAL;
+ writel(ECC_DIS_VAL_CH2, ecc_addr);
/* fallthrough */
case CEVA_LS2080A:
writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
- if (priv->flag & FLAG_COHERENT)
- writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
break;
+ case CEVA_LS1028A:
case CEVA_LS1088A:
- writel(LS1088_ECC_DIS_VAL_CH2, LS1088_ECC_DIS_ADDR_CH2);
+ if (!ecc_addr)
+ return -EINVAL;
+ writel(ECC_DIS_VAL_CH3, ecc_addr);
writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
- if (priv->flag & FLAG_COHERENT)
- writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
break;
}
+ if (priv->flag & FLAG_COHERENT)
+ writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
+
return 0;
}
@@ -187,6 +190,7 @@
{ .compatible = "ceva,ahci-1v84", .data = CEVA_1V84 },
{ .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A },
{ .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A },
+ { .compatible = "fsl,ls1028a-ahci", .data = CEVA_LS1028A },
{ .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A },
{ .compatible = "fsl,ls1046a-ahci", .data = CEVA_LS1046A },
{ .compatible = "fsl,ls1088a-ahci", .data = CEVA_LS1088A },
@@ -197,6 +201,8 @@
static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
{
struct ceva_sata_priv *priv = dev_get_priv(dev);
+ struct resource res_regs;
+ int ret;
if (dev_read_bool(dev, "dma-coherent"))
priv->flag |= FLAG_COHERENT;
@@ -205,8 +211,18 @@
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
+ ret = dev_read_resource_byname(dev, "ecc-addr", &res_regs);
+ if (ret)
+ priv->ecc_base = 0;
+ else
+ priv->ecc_base = res_regs.start;
+
priv->soc = dev_get_driver_data(dev);
+ debug("ccsr-sata-base %lx\t ecc-base %lx\n",
+ priv->base,
+ priv->ecc_base);
+
return 0;
}