serial: Update NS16550_t and struct NS16550
Typedefs should not be used in U-Boot and structs should be lower case.
Update the code to use struct ns16550 consistently.
Put a header guard on the file while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8dd81ad..d529b1b 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -156,7 +156,7 @@
#endif /* CONFIG_NS16550_DYNAMIC */
-static void ns16550_writeb(NS16550_t port, int offset, int value)
+static void ns16550_writeb(struct ns16550 *port, int offset, int value)
{
struct ns16550_plat *plat = port->plat;
unsigned char *addr;
@@ -170,7 +170,7 @@
serial_out_shift(addr, plat->reg_shift, value);
}
-static int ns16550_readb(NS16550_t port, int offset)
+static int ns16550_readb(struct ns16550 *port, int offset)
{
struct ns16550_plat *plat = port->plat;
unsigned char *addr;
@@ -184,7 +184,7 @@
return serial_in_shift(addr, plat->reg_shift);
}
-static u32 ns16550_getfcr(NS16550_t port)
+static u32 ns16550_getfcr(struct ns16550 *port)
{
struct ns16550_plat *plat = port->plat;
@@ -199,20 +199,20 @@
ns16550_readb(com_port, \
(unsigned char *)addr - (unsigned char *)com_port)
#else
-static u32 ns16550_getfcr(NS16550_t port)
+static u32 ns16550_getfcr(struct ns16550 *port)
{
return UART_FCR_DEFVAL;
}
#endif
-int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
+int ns16550_calc_divisor(struct ns16550 *port, int clock, int baudrate)
{
const unsigned int mode_x_div = 16;
return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
}
-static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
+static void NS16550_setbrg(struct ns16550 *com_port, int baud_divisor)
{
/* to keep serial format, read lcr before writing BKSE */
int lcr_val = serial_in(&com_port->lcr) & ~UART_LCR_BKSE;
@@ -223,7 +223,7 @@
serial_out(lcr_val, &com_port->lcr);
}
-void NS16550_init(NS16550_t com_port, int baud_divisor)
+void NS16550_init(struct ns16550 *com_port, int baud_divisor)
{
#if (defined(CONFIG_SPL_BUILD) && \
(defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
@@ -272,7 +272,7 @@
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
-void NS16550_reinit(NS16550_t com_port, int baud_divisor)
+void NS16550_reinit(struct ns16550 *com_port, int baud_divisor)
{
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
NS16550_setbrg(com_port, 0);
@@ -282,7 +282,7 @@
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
-void NS16550_putc(NS16550_t com_port, char c)
+void NS16550_putc(struct ns16550 *com_port, char c)
{
while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
;
@@ -299,7 +299,7 @@
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
-char NS16550_getc(NS16550_t com_port)
+char NS16550_getc(struct ns16550 *com_port)
{
while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY)
@@ -311,7 +311,7 @@
return serial_in(&com_port->rbr);
}
-int NS16550_tstc(NS16550_t com_port)
+int NS16550_tstc(struct ns16550 *com_port)
{
return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
}
@@ -324,7 +324,7 @@
static inline void _debug_uart_init(void)
{
- struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+ struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
int baud_divisor;
/*
@@ -345,7 +345,7 @@
serial_dout(&com_port->lcr, UART_LCRVAL);
}
-static inline int NS16550_read_baud_divisor(struct NS16550 *com_port)
+static inline int NS16550_read_baud_divisor(struct ns16550 *com_port)
{
int ret;
@@ -359,7 +359,7 @@
static inline void _debug_uart_putc(int ch)
{
- struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+ struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) {
#ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED
@@ -377,7 +377,7 @@
#if CONFIG_IS_ENABLED(DM_SERIAL)
static int ns16550_serial_putc(struct udevice *dev, const char ch)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
if (!(serial_in(&com_port->lsr) & UART_LSR_THRE))
return -EAGAIN;
@@ -397,7 +397,7 @@
static int ns16550_serial_pending(struct udevice *dev, bool input)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
if (input)
return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0;
@@ -407,7 +407,7 @@
static int ns16550_serial_getc(struct udevice *dev)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
if (!(serial_in(&com_port->lsr) & UART_LSR_DR))
return -EAGAIN;
@@ -417,7 +417,7 @@
static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
struct ns16550_plat *plat = com_port->plat;
int clock_divisor;
@@ -430,7 +430,7 @@
static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
int lcr_val = UART_LCR_WLS_8;
uint parity = SERIAL_GET_PARITY(serial_config);
uint bits = SERIAL_GET_BITS(serial_config);
@@ -464,7 +464,7 @@
static int ns16550_serial_getinfo(struct udevice *dev,
struct serial_device_info *info)
{
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
struct ns16550_plat *plat = com_port->plat;
info->type = SERIAL_CHIP_16550_COMPATIBLE;
@@ -499,7 +499,7 @@
int ns16550_serial_probe(struct udevice *dev)
{
struct ns16550_plat *plat = dev->plat;
- struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550 *const com_port = dev_get_priv(dev);
struct reset_ctl_bulk reset_bulk;
fdt_addr_t addr;
int ret;
@@ -613,7 +613,7 @@
.of_to_plat = ns16550_serial_of_to_plat,
.plat_auto = sizeof(struct ns16550_plat),
#endif
- .priv_auto = sizeof(struct NS16550),
+ .priv_auto = sizeof(struct ns16550),
.probe = ns16550_serial_probe,
.ops = &ns16550_serial_ops,
#if !CONFIG_IS_ENABLED(OF_CONTROL)